Repository navigation
Releases: Project516/qbittorrent-warp
Release list
qBittorrent-WARP 5.2.4.2
Prebuilt qBittorrent-WARP 5.2.4.2, based on upstream qBittorrent 5.2.4.
Which build do I want?
qBittorrent-WARP-5.2.4.2-x86_64.AppImage.zip- desktop build with the full graphical interface, for
64-bit Linux PCs (x86_64).qBittorrent-WARP-5.2.4.2-aarch64.AppImage.zip- headless build (qbittorrent-nox) for 64-bit ARM
boards such as the Raspberry Pi. It has no graphical interface and is
used through its Web UI in a browser. The arm64 asset is attached a few
minutes after the release first appears.
Install
Download the zip for your machine, extract the AppImage, make it
executable and run it:
unzip qBittorrent-WARP-5.2.4.2-x86_64.AppImage.zip
chmod +x qBittorrent-WARP-5.2.4.2-x86_64.AppImage
./qBittorrent-WARP-5.2.4.2-x86_64.AppImage
It is self-contained and portable: a profile folder holding all
configuration, data and the WARP engine is created next to the AppImage
file. Nothing is written to system locations. Verify the download against
SHA256SUMS if you wish.
Headless / Raspberry Pi
The aarch64 build serves the Web UI on port 8080. Install libfuse2
(sudo apt install libfuse2) or run with --appimage-extract-and-run,
and pass --confirm-legal-notice the first time so it does not wait for
input. On first start it prints a randomly generated Web UI password to
the log; read it there, browse to http://<pi-ip>:8080 and change it.
See warp/README.md
for running it as a service.
Bundled helper licenses and pinned versions are listed in
warp/THIRD-PARTY-NOTICES.md.
qBittorrent-WARP 5.2.4.1
Prebuilt qBittorrent-WARP 5.2.4.1, based on upstream qBittorrent 5.2.4.
Which build do I want?
qBittorrent-WARP-5.2.4.1-x86_64.AppImage.zip- desktop build with the full graphical interface, for
64-bit Linux PCs (x86_64).qBittorrent-WARP-5.2.4.1-aarch64.AppImage.zip- headless build (qbittorrent-nox) for 64-bit ARM
boards such as the Raspberry Pi. It has no graphical interface and is
used through its Web UI in a browser. The arm64 asset is attached a few
minutes after the release first appears.
Install
Download the zip for your machine, extract the AppImage, make it
executable and run it:
unzip qBittorrent-WARP-5.2.4.1-x86_64.AppImage.zip
chmod +x qBittorrent-WARP-5.2.4.1-x86_64.AppImage
./qBittorrent-WARP-5.2.4.1-x86_64.AppImage
It is self-contained and portable: a profile folder holding all
configuration, data and the WARP engine is created next to the AppImage
file. Nothing is written to system locations. Verify the download against
SHA256SUMS if you wish.
Headless / Raspberry Pi
The aarch64 build serves the Web UI on port 8080. Install libfuse2
(sudo apt install libfuse2) or run with --appimage-extract-and-run,
and pass --confirm-legal-notice the first time so it does not wait for
input. On first start it prints a randomly generated Web UI password to
the log; read it there, browse to http://<pi-ip>:8080 and change it.
See warp/README.md
for running it as a service.
Bundled helper licenses and pinned versions are listed in
warp/THIRD-PARTY-NOTICES.md.
qBittorrent-WARP 5.2.3.5
Prebuilt qBittorrent-WARP 5.2.3.5, based on upstream qBittorrent 5.2.3.
Which build do I want?
qBittorrent-WARP-5.2.3.5-x86_64.AppImage.zip- desktop build with the full graphical interface, for
64-bit Linux PCs (x86_64).qBittorrent-WARP-5.2.3.5-aarch64.AppImage.zip- headless build (qbittorrent-nox) for 64-bit ARM
boards such as the Raspberry Pi. It has no graphical interface and is
used through its Web UI in a browser. The arm64 asset is attached a few
minutes after the release first appears.
Install
Download the zip for your machine, extract the AppImage, make it
executable and run it:
unzip qBittorrent-WARP-5.2.3.5-x86_64.AppImage.zip
chmod +x qBittorrent-WARP-5.2.3.5-x86_64.AppImage
./qBittorrent-WARP-5.2.3.5-x86_64.AppImage
It is self-contained and portable: a profile folder holding all
configuration, data and the WARP engine is created next to the AppImage
file. Nothing is written to system locations. Verify the download against
SHA256SUMS if you wish.
Headless / Raspberry Pi
The aarch64 build serves the Web UI on port 8080. Install libfuse2
(sudo apt install libfuse2) or run with --appimage-extract-and-run,
and pass --confirm-legal-notice the first time so it does not wait for
input. On first start it prints a randomly generated Web UI password to
the log; read it there, browse to http://<pi-ip>:8080 and change it.
See warp/README.md
for running it as a service.
Bundled helper licenses and pinned versions are listed in
warp/THIRD-PARTY-NOTICES.md.
qBittorrent-WARP 5.2.3.4
Prebuilt qBittorrent-WARP 5.2.3.4, based on upstream qBittorrent 5.2.3.
Which build do I want?
qBittorrent-WARP-5.2.3.4-x86_64.AppImage.zip- desktop build with the full graphical interface, for
64-bit Linux PCs (x86_64).qBittorrent-WARP-5.2.3.4-aarch64.AppImage.zip- headless build (qbittorrent-nox) for 64-bit ARM
boards such as the Raspberry Pi. It has no graphical interface and is
used through its Web UI in a browser. The arm64 asset is attached a few
minutes after the release first appears.
Install
Download the zip for your machine, extract the AppImage, make it
executable and run it:
unzip qBittorrent-WARP-5.2.3.4-x86_64.AppImage.zip
chmod +x qBittorrent-WARP-5.2.3.4-x86_64.AppImage
./qBittorrent-WARP-5.2.3.4-x86_64.AppImage
It is self-contained and portable: a profile folder holding all
configuration, data and the WARP engine is created next to the AppImage
file. Nothing is written to system locations. Verify the download against
SHA256SUMS if you wish.
Headless / Raspberry Pi
The aarch64 build serves the Web UI on port 8080. Install libfuse2
(sudo apt install libfuse2) or run with --appimage-extract-and-run,
and pass --confirm-legal-notice the first time so it does not wait for
input. On first start it prints a randomly generated Web UI password to
the log; read it there, browse to http://<pi-ip>:8080 and change it.
See warp/README.md
for running it as a service.
Bundled helper licenses and pinned versions are listed in
warp/THIRD-PARTY-NOTICES.md.
qBittorrent-WARP 5.2.3.3
Prebuilt qBittorrent-WARP 5.2.3.3, based on upstream qBittorrent 5.2.3.
Which build do I want?
qBittorrent-WARP-5.2.3.3-x86_64.AppImage.zip- desktop build with the full graphical interface, for
64-bit Linux PCs (x86_64).qBittorrent-WARP-5.2.3.3-aarch64.AppImage.zip- headless build (qbittorrent-nox) for 64-bit ARM
boards such as the Raspberry Pi. It has no graphical interface and is
used through its Web UI in a browser. The arm64 asset is attached a few
minutes after the release first appears.
Install
Download the zip for your machine, extract the AppImage, make it
executable and run it:
unzip qBittorrent-WARP-5.2.3.3-x86_64.AppImage.zip
chmod +x qBittorrent-WARP-5.2.3.3-x86_64.AppImage
./qBittorrent-WARP-5.2.3.3-x86_64.AppImage
It is self-contained and portable: a profile folder holding all
configuration, data and the WARP engine is created next to the AppImage
file. Nothing is written to system locations. Verify the download against
SHA256SUMS if you wish.
Headless / Raspberry Pi
The aarch64 build serves the Web UI on port 8080. Install libfuse2
(sudo apt install libfuse2) or run with --appimage-extract-and-run,
and pass --confirm-legal-notice the first time so it does not wait for
input. On first start it prints a randomly generated Web UI password to
the log; read it there, browse to http://<pi-ip>:8080 and change it.
See warp/README.md
for running it as a service.
Bundled helper licenses and pinned versions are listed in
warp/THIRD-PARTY-NOTICES.md.
qBittorrent-WARP 5.2.3.2
Prebuilt qBittorrent-WARP 5.2.3.2, based on upstream qBittorrent 5.2.3.
Which build do I want?
qBittorrent-WARP-5.2.3.2-x86_64.AppImage.zip- desktop build with the full graphical interface, for
64-bit Linux PCs (x86_64).qBittorrent-WARP-5.2.3.2-aarch64.AppImage.zip- headless build (qbittorrent-nox) for 64-bit ARM
boards such as the Raspberry Pi. It has no graphical interface and is
used through its Web UI in a browser. The arm64 asset is attached a few
minutes after the release first appears.
Install
Download the zip for your machine, extract the AppImage, make it
executable and run it:
unzip qBittorrent-WARP-5.2.3.2-x86_64.AppImage.zip
chmod +x qBittorrent-WARP-5.2.3.2-x86_64.AppImage
./qBittorrent-WARP-5.2.3.2-x86_64.AppImage
It is self-contained and portable: a profile folder holding all
configuration, data and the WARP engine is created next to the AppImage
file. Nothing is written to system locations. Verify the download against
SHA256SUMS if you wish.
Headless / Raspberry Pi
The aarch64 build serves the Web UI on port 8080. Install libfuse2
(sudo apt install libfuse2) or run with --appimage-extract-and-run,
and pass --confirm-legal-notice the first time so it does not wait for
input. On first start it prints a randomly generated Web UI password to
the log; read it there, browse to http://<pi-ip>:8080 and change it.
See warp/README.md
for running it as a service.
Bundled helper licenses and pinned versions are listed in
warp/THIRD-PARTY-NOTICES.md.
qBittorrent-WARP 5.2.3.1
Prebuilt qBittorrent-WARP 5.2.3.1, based on upstream qBittorrent 5.2.3.
Which build do I want?
qBittorrent-WARP-5.2.3.1-x86_64.AppImage.zip- desktop build with the full graphical interface, for
64-bit Linux PCs (x86_64).qBittorrent-WARP-5.2.3.1-aarch64.AppImage.zip- headless build (qbittorrent-nox) for 64-bit ARM
boards such as the Raspberry Pi. It has no graphical interface and is
used through its Web UI in a browser. The arm64 asset is attached a few
minutes after the release first appears.
Install
Download the zip for your machine, extract the AppImage, make it
executable and run it:
unzip qBittorrent-WARP-5.2.3.1-x86_64.AppImage.zip
chmod +x qBittorrent-WARP-5.2.3.1-x86_64.AppImage
./qBittorrent-WARP-5.2.3.1-x86_64.AppImage
It is self-contained and portable: a profile folder holding all
configuration, data and the WARP engine is created next to the AppImage
file. Nothing is written to system locations. Verify the download against
SHA256SUMS if you wish.
Headless / Raspberry Pi
The aarch64 build serves the Web UI on port 8080. Install libfuse2
(sudo apt install libfuse2) or run with --appimage-extract-and-run,
and pass --confirm-legal-notice the first time so it does not wait for
input. On first start it prints a randomly generated Web UI password to
the log; read it there, browse to http://<pi-ip>:8080 and change it.
See warp/README.md
for running it as a service.
Bundled helper licenses and pinned versions are listed in
warp/THIRD-PARTY-NOTICES.md.
qBittorrent-WARP 5.2.2.5
Prebuilt qBittorrent-WARP 5.2.2.5, based on upstream qBittorrent 5.2.2.
Which build do I want?
qBittorrent-WARP-5.2.2.5-x86_64.AppImage.zip- desktop build with the full graphical interface, for
64-bit Linux PCs (x86_64).qBittorrent-WARP-5.2.2.5-aarch64.AppImage.zip- headless build (qbittorrent-nox) for 64-bit ARM
boards such as the Raspberry Pi. It has no graphical interface and is
used through its Web UI in a browser. The arm64 asset is attached a few
minutes after the release first appears.
Install
Download the zip for your machine, extract the AppImage, make it
executable and run it:
unzip qBittorrent-WARP-5.2.2.5-x86_64.AppImage.zip
chmod +x qBittorrent-WARP-5.2.2.5-x86_64.AppImage
./qBittorrent-WARP-5.2.2.5-x86_64.AppImage
It is self-contained and portable: a profile folder holding all
configuration, data and the WARP engine is created next to the AppImage
file. Nothing is written to system locations. Verify the download against
SHA256SUMS if you wish.
Headless / Raspberry Pi
The aarch64 build serves the Web UI on port 8080. Install libfuse2
(sudo apt install libfuse2) or run with --appimage-extract-and-run,
and pass --confirm-legal-notice the first time so it does not wait for
input. On first start it prints a randomly generated Web UI password to
the log; read it there, browse to http://<pi-ip>:8080 and change it.
See warp/README.md
for running it as a service.
Bundled helper licenses and pinned versions are listed in
warp/THIRD-PARTY-NOTICES.md.
qBittorrent-WARP 5.2.2.1
Prebuilt qBittorrent-WARP 5.2.2.1, based on upstream qBittorrent 5.2.2.
Install
Download the zip, extract the AppImage, make it executable and run it:
unzip qBittorrent-WARP-5.2.2.1-x86_64.AppImage.zip
chmod +x qBittorrent-WARP-5.2.2.1-x86_64.AppImage
./qBittorrent-WARP-5.2.2.1-x86_64.AppImage
It is self-contained and portable: a profile folder holding all
configuration, data and the WARP engine is created next to the AppImage
file. Nothing is written to system locations. Verify the download against
SHA256SUMS if you wish.
Bundled helper licenses and pinned versions are listed in
warp/THIRD-PARTY-NOTICES.md.
qBittorrent-WARP 5.2.1.11
Prebuilt qBittorrent-WARP 5.2.1.11, based on upstream qBittorrent 5.2.1.
Install
Download the zip, extract the AppImage, make it executable and run it:
unzip qBittorrent-WARP-5.2.1.11-x86_64.AppImage.zip
chmod +x qBittorrent-WARP-5.2.1.11-x86_64.AppImage
./qBittorrent-WARP-5.2.1.11-x86_64.AppImage
It is self-contained and portable: a profile folder holding all
configuration, data and the WARP engine is created next to the AppImage
file. Nothing is written to system locations. Verify the download against
SHA256SUMS if you wish.
Bundled helper licenses and pinned versions are listed in
warp/THIRD-PARTY-NOTICES.md.