PsychOS v0.4.15b

🎉 PsychOS Alpha Release v0.4.15b

✨ Changes

• aec24fe ✨ Implement encoder acceleration for better volume control adjustments. Disabled BleTask due to issues on our testing unit.
• cb9717c ✨ Add warning message for flashing patterns in pixel flush screen
• dfc25c8 ✨ Now it's possible to use the knob while flushing the screen.
• 2560a0b ✨ Improved Encoder sensibility. Inverted encoder pins, so now rotations perform the correct actions, because SOMEONE wired it wrongly... iykyk :)

📥 Installation

Prerequisites

Install esptool on Windows

1. Install Python from python.org.
2. Open Command Prompt and run:

   pip install esptool

Install esptool on Linux

1. Open Terminal and run:

   sudo apt-get install python3-pip
   pip3 install esptool

Flashing the Firmware

Download psychos-0.4.15b .bin and flash using:

For Windows:

python -m esptool --chip esp32s3 --port COM[X] write_flash 0x0 psychos-0.4.15b .bin

For Linux/macOS:

esptool.py --chip esp32s3 --port /dev/ttyUSB0 write_flash 0x0 psychos-0.4.15b .bin

⚠️ Known Issues

• Matrix scanning in development
• Configuration system pending

🛠️ Next Steps

• Complete matrix scanning implementation
• Add configuration interface
• Implement layer system