Skip to content

QQ Super Multiband Compression 1.2.7 Stable

Choose a tag to compare

View all tags
@Ziqing-Gu Ziqing-Gu released this 01 Oct 20:48
· 4 commits to main since this release
v1.2.7
d103b13

QQ Super Multiband Compression 1.2.7 Stable

发布日期 / Release date: 2026-10-02
厂商 / Publisher: Qing Audio
源码 / Source: 闭源；仅公开下列插件成品与用户文档。 / Proprietary; only the plug-in packages and user documents listed below are public.

新增功能 / New features

1.2.7 的 FULL 模式在停播后增加极低残留休眠：输入足够低、所有相关增益上限安全、实际滤波与动态尾音衰减、参数及滤波过渡结束并持续安静后，才暂停高开销处理。ECO 继续在宿主明确停播且未录音、未离线导出时立即静音和暂停处理。升级过程保留每段独立的 Classic/Super、Dual 的 UP/DOWN 算法选择、逐段侧链 EQ、ECO/FULL 选择记忆，以及原有宿主延迟补偿规则。

FULL now suspends expensive processing after a known Stop only when very low input, conservative gain bounds, measured filter/dynamics tails, settled controls and a sustained quiet period are all satisfied. ECO still mutes and suspends immediately on a known Stop outside recording and offline rendering. Per-band Classic/Super, independent Dual UP/DOWN algorithm choices, per-band sidechain EQ, ECO/FULL preference recall and existing host latency reporting are retained.

修复与行为变化 / Fixes and behavior changes

  • 新实例继承最后一次手动选择的 ECO/FULL；保存的工程恢复各实例自己的模式。 / New instances inherit the last manually selected ECO/FULL mode; saved sessions restore each instance's own mode.
  • 五段 Linear Phase 在完整输入历史归零后跳过无效 FFT；FULL 的极低残留休眠仍保守检查所有已连接输入总线。 / Five-band Linear Phase skips unnecessary FFT work after its complete input history reaches zero. FULL's low-residual sleep still conservatively checks every connected input bus.
  • 1.2.3 修正拖动旋钮或 Band Output 时切换 Shift 导致的数值跳变。 / Version 1.2.3 fixed value jumps when Shift is pressed or released during knob or Band Output dragging.
  • macOS AU 的旧版与扩展 Ratio 参数别名标记已修正，并通过 AU 验证。 / Legacy and extended Ratio aliases have corrected macOS AU metadata and passed AU validation.

兼容性与安装 / Compatibility and installation

Windows 10/11 x64：VST3。macOS 11 或更新：Apple Silicon VST3、Intel x86_64 VST3、Universal 2 AU。Apple Silicon 上以 Rosetta 运行的 Intel 宿主请选择 Intel VST3；只安装宿主需要的格式。macOS 包为临时签名，未做 Apple Developer ID 公证。

Windows 10/11 x64: VST3. macOS 11 or later: Apple Silicon VST3, Intel x86_64 VST3 and Universal 2 AU. An Intel host under Rosetta on Apple Silicon needs the Intel VST3. Install only the formats your host uses. macOS packages are ad-hoc signed, not Apple Developer ID notarized.

升级前保存工程副本并完全退出宿主，替换完整插件 bundle 后重新扫描。旧工程的 Ratio 自动化、逐段算法和侧链路由请按手册检查；避免让旧版与扩展版 Ratio 自动化轨同时控制同一值。详细路径和步骤见对应语言的安装说明。

Save a session copy and fully quit the host before upgrading. Replace the complete bundle, then rescan. Review Ratio automation, per-band algorithms and sidechain routing in older sessions; avoid driving one Ratio from both legacy and extended automation lanes. See the installation guide in your language for paths and detailed steps.

已知事项 / Known considerations

Normal 分频具有随频率变化的相位响应；启用宿主延迟补偿。FULL 停播监听实时输入时仍正常处理；极端增益设置或未使用但已连接的侧链噪声可能使其保守地保持运行。自动构建和插件加载验证已完成，尚无本版在所有 DAW 中的长期试听结论；Intel AU 切片已核对，但未在独立 Intel 主机运行 auval。

Normal crossover has frequency-dependent phase response; enable host delay compensation. FULL continues processing live input while stopped; extreme gain or noise on an unused connected sidechain can conservatively keep it awake. Automated builds and plug-in load checks are complete, but this version has no long-session listening result across every DAW. The Intel AU slice was inspected, but auval was not run separately on an Intel machine.

自上次公开版 1.1.0 起的逐版本记录 / Version history since public 1.1.0

1.2.0

逐段加入独立侧链来源、检测 EQ、增益与 Listen；Single Ratio 扩展至 1:200–200:1，Dual 保持相应上下半区间。此版为本机 Windows 升级，未单独公开 macOS 包。 / Added per-band detector sources, EQ, gain and Listen. Single Ratio expanded to 1:200–200:1, with corresponding Dual up/down ranges. This was a local Windows upgrade without a separate public macOS package.

1.2.1

新建侧链来源菜单收敛为 This Band、Internal Full、External；旧工程中的 Band 1–5 路由仍可作为 Legacy 恢复。更新逐段侧链操作与双语手册，并被用户确认为此前 Stable。 / Simplified new sidechain source choices to This Band, Internal Full and External while preserving saved Band 1–5 routes as Legacy. Updated per-band sidechain guidance and bilingual manuals; this was the previously user-confirmed Stable.

1.2.2

将 Makeup 与各段 Wet Gain 的范围统一收窄至 ±30 dB，MATCH 使用同一限制；其余音频处理保持。 / Limited Makeup and per-band Wet Gain to ±30 dB, with the same bound for MATCH; other audio processing was retained.

1.2.3

修正持续拖动旋钮、Master Output 和频谱 Band Output 时切换 Shift 会使数值回跳的问题。 / Fixed value jumps when Shift was pressed or released during knob, Master Output and spectrum Band Output dragging.

1.2.4

加入逐实例 ECO/FULL、Dual UP 与 DOWN 各自独立的 Classic/Super，并优化 MATCH 与隐藏视图分析；精确零输入在尾音排空后可休眠。 / Added per-instance ECO/FULL, independent Classic/Super choices for Dual UP and DOWN, and leaner MATCH/hidden-view analysis; exact-zero input can sleep after tails drain.

1.2.5

新实例记住最后一次手动 ECO/FULL 选择；Linear Phase 在完整输入历史归零后跳过无效 FFT，并修正重复相同参数通知对休眠等待的干扰。 / New instances remember the last manual ECO/FULL choice. Linear Phase skips FFT work after its full input history reaches zero, and repeated unchanged parameter notifications no longer disturb the idle wait.

1.2.6

ECO 在明确停播时立即静音并暂停处理；FULL 保留实时输入监听与尾音安全休眠。减少检测器的冗余计算，保留压缩曲线和参数身份。 / ECO immediately mutes and suspends on a known Stop; FULL retains live monitoring and tail-safe sleep. Redundant detector work was reduced without changing compression curves or parameter identity.

1.2.7

FULL 增加带增益与尾音保护的极低残留休眠，同时保持 Normal 必要状态和 Linear Phase 时间位置；修正 macOS AU Ratio 别名元数据。本版中英文手册各 35 页。 / FULL adds gain- and tail-guarded very-low-residual sleep while maintaining required Normal state and Linear Phase timing; macOS AU Ratio alias metadata was corrected. Both language manuals have 35 pages.

实际资产 / Release assets

这八项仅包含安装包和用户文档；没有源码、内部日志或构建记录。 / These eight files contain only installation packages and user documentation, without source code, internal logs or build records.

Assets 10
Loading