Shizuku gets stuck at "Waiting for service..." on Oppo A18 (CPH2591)

[Lutfi-zyxxl]

Requirements

• Shizuku is downloaded from official channels (GitHub release or Google Play)
• Shizuku is not running in a virtual environment or broken ROM (GrapheneOS)
• (Root users) No Xposed installed / Xposed is not enabled for Shizuku

Latest Shizuku version

13.6

Version in use

13.6

Mode

root

Android version

Android 14

Device

CPH2591_14.0.0.700(EX01)

What did you do

No response

What happened

Body:
Hello,
I'm having an issue starting Shizuku using Wireless Debugging.
Device information:
Device: Oppo A18 (CPH2591)
Android: 14
Build: CPH2591_14.0.0.700(EX01)
Shizuku: v13.6.0 (official GitHub release)
Issue: Pairing with Wireless Debugging succeeds, and the notification "Wireless debugging connected" appears.
However, after tapping Start, the starter log always stops at:
starting server...
shizuku_server pid is ...
shizuku_starter exit with 0

Waiting for service...
It never proceeds beyond "Waiting for service...", and the "Wireless debugging connected" notification disappears a few seconds later.
What I have already tried:
Installed the latest official Shizuku APK from GitHub.
Updated my device to the latest available firmware.
Re-paired Wireless Debugging multiple times.
Revoked USB debugging authorizations and paired again.
Restarted the device.
Disabled "Verify apps over USB".
Disabled battery optimization for Shizuku.
The result is always the same.
Is this a known compatibility issue with ColorOS/Oppo, or is there anything else I can do to diagnose this problem?
Thank you.

What do you expect

No response

[GentleClash]

Try installing the patched apk from here

I had the same problem in my OneUI 8.5, this fixed it. Please tell if it fixes for you