openfpga-SMS with Analogizer SMS/LightPhaser SNAC

You need to configure Analogizer with A/B switch into Position B. When the Pocket Menu option _Enable SMS/Light Phaser SNAC_ is enabled works with a SEGA SMS or SEGA Light Phaser connected using the Blue212 SEGA SNAC adapter, if is disabled then generic SNAC controllers can be configured using the usual way (configuration file). The Analogizer video output and generic SNAC can be configured using the Pupdate core downloader/configurator utility or Analogizer Configurator, both save configuration into /Assets/analogizer/common/analogizer.bin
You Have two options in the Pocket Menu: Enable Analogizer (required for video output) and SEGA SNAC with SMS/Light Phaser SNAC or Genesis SNAC . Fixed an error that when Analogizer adapter is enabled from Pocket menu the core is hold in reset state permanently.

• (21/07/26) Fixed Analogizer Y/C video output.
• (22/07/26) Fixed Analogizer Y/C video output. pattern
• (23/07/26) Fixed Y/C output: force Y/C values to 0 during Blanking period. Now Rambo III works in Y/C video output mode.
  WARNING!!! you need a SEGA Genesis Cable Harness that interchanges Rx+ and Tx- lines between the SNAC adapter and Analogizer SNAC port to use the added SEGA Genesis 3 & 6 buttons SNAC support via Pocket menu option: Genesis SNAC

Check this post to learn more about build your own Analogizer SEGA Genesis cable harness or get the gerber files to order a PCB.
Added experimental support for SNAC SEGA Genesis 3 & 6 buttons game controllers to Pocket Analogizer using openfpga-SMS core