Repository navigation
v2.0.0 — Vault-Tec Edition
╔══════════════════════════════════════════════════════════════╗
║ VAULT-TEC FIRMWARE RELEASE — v2.0.0 ║
║ "Preparing for the future — one hash at a time." ║
╚══════════════════════════════════════════════════════════════╝
Pre-Built Firmware Binaries
Download the correct .bin for your CYD 2.4" board's touch type:
| File | Touch Type | Board |
|---|---|---|
BitAxe-Display-v2.0-CYD24-Capacitive.bin |
Capacitive (CST820) | Most CYD 2.4" boards |
BitAxe-Display-v2.0-CYD24-Resistive.bin |
Resistive (XPT2046) | Older CYD 2.4" boards |
Not sure which you have? If your screen responds to a light finger tap, it's capacitive. If you need to press firmly or use a stylus, it's resistive.
How to Flash (No Software Required)
- Open Espressif Web Flash Tool in Chrome or Edge
- Connect your CYD board via USB-C
- Click Connect and select the COM/serial port (you need to be in download mode so press to reset and then press and hold boot)
- Click Choose File and select the downloaded
.bin - Set Flash Address to
0x0 - Click Program and wait for completion (KEEP HOLDING BOOT)
- Press RST on the board to reboot
See the full flashing walkthrough in the README for detailed instructions including driver installation and troubleshooting.
Features
- Monitor up to 8 BitAxe miners simultaneously
- Real-time hashrate, temperature, power, shares, and efficiency
- Remote device control (frequency, voltage, fan speed, restart)
- Multi-coin price tracking (BTC, BCH, DGB, BTC2, XEC)
- Network difficulty from mempool.space
- WiFi configuration portal — no reflashing needed
- Steampunk amber CRT aesthetic
🤖 Generated with Claude Code