Repository navigation
Releases: Slider0007/test-release
Releases · Slider0007/test-release
Release list
v16.2.0-SLFork
v16.1.3-SLFork
v16.1.2-SLFork
16.1.2-SLFork (2026-08-24)
💿 Installation / Migration Notes
A. Initial Installation
--> Recommended: Web Installer
- Follow instructions listed on Web Installer Page
- Alternative method: Manual Installation
B. Update from previous releases (17.x)
--> Recommended: OTA Update
- Download board specific firmware package
- Perform OTA update
C. Migration from previous major release (16.x)
--> Recommended: OTA Update
- Download board specific firmware package from GitHub release page
- Perform OTA update (ignore file name mismatch warning)
- Verify migrated device configuration
- Check migrated configuration briefly (majority of the parameter are migrated)
- Reconfigure GPIO section (if it was configured before, no automatic migration)
- Update reference image and alignment marker (Mandatory due to multiple new camera features and adaptions)
- Lots of (breaking) changes are made to existing APIs. A manual reconfiguration is most likely required. Check API documentation
- Check PR descriptions in
BREAKING CHANGESsection of release v17.0.0-SLFork and/or documentation for further information
Other Changes
v16.1.1-SLFork
v16.1.0-SLFork
16.1.0-SLFork (2025-12-02)
Other Changes
v16.0.3-SLFork
16.0.3-SLFork (2025-12-02)
Other Changes
- deps: Bump actions/checkout from 4 to 5 (#83) (5e26eb4)
- deps: Bump actions/download-artifact from 4 to 5 (3bf3a8e)
- deps: Bump actions/download-artifact from 4 to 5 (#82) (638a651)
- deps: Bump actions/github-script from 7 to 8 (#89) (321de8c)
- deps: Bump actions/setup-python from 5 to 6 (#90) (131041d)
v16.0.2-SLFork
v16.0.1-SLFork
v16.0.0-SLFork
16.0.0-SLFork (2024-10-17)
⚠ BREAKING CHANGES
- config-handling: Complete rework of internal config parameter and sequence data handling (#165)
- GPIO: Complete rework of GPIO handler & Add additional features for GPIOs (#154)
- mqtt: Complete rework of MQTT API & Add new content (#151)
- REST API: Complete rework of REST API & WebUI 'info' page (#85)
Features
- camera: Support additional camera features (#141) (96b2d05)
- GPIO: Complete rework of GPIO handler & Add additional features for GPIOs (#154) (026c650)
- hardware: Add support for board Seeed Studio XIAO ESP32S3 Sense (#155) (922ba2f)
- influxdb1+2: Implement TLS encryption using certificates (#105) (4364427)
- Make camera frequency adjustable (#79) (47f19c8)
- mqtt: Complete rework of MQTT API & Add new content (#151) (48ce862)
- mqtt: Implement MQTT TLS encryption using certificates (#102) (7d53c1e)
- REST API: Complete rework of REST API & WebUI 'info' page (#85) (93353bb)
- rest api: Prometheus (OpenMetrics) exporter (/metrics) (#163) (7f14d89)
- webui: 'Overview'+'Data Graph': Save auto page refresh config persistently (#113) (6a36d5a)
- webui: Automatic ROI naming + ROI/Alignment marker position validation (#99) (cd5b979)
- webui: WLAN configuration via web interface (cfc53b0)
Bug Fixes
- alignment marker: Fix usage of preallocated RAM (#95) (5676d59)
- Digit no zero crossing issue (#74) (9c1a35d)
- fileserver: avoid sending two "last-chunk" sequences (#2532) (#53) (db467c0)
- Fix 'MaxRateType' parameter migration (#91) (5926bf8)
- Fix exeception accessing getJPG ressource (#121) (5d114d3)
- gpio: Fix GPIO handler enable flag (#134) (6f4a8f4)
- gpio: Fix init issue & wrong mode comparison (#115) (8da5982)
- influxdb: Consider DST for UTC time converison (#89) (d1f77ac)
- influxdbv2: Rename parameter 'database' to 'bucket' (#100) (b2f9e11)
- load fallbackvalue: Avoid conversion exception if string is invalid (#169) (7a3219c)
- mqtt: Fix Home Assistant Topic 'Problem' (#130) (cab4597)
- mqtt: Fix Home Assistant topic 'problem' (#140) (926acdb)
- mqtt: Fix Home Assistant topic problem (again) (926acdb)
- mqtt: Fix process init failed if MQTT not yet connected (#139) (64b63b7)
- mqtt: Reset username+password when parameter is disabled (#122) (abb0afe)
- parameter migration: Fix 'MaxRateType' parameter (Handling 'RateOff') (#97) (6901c01)
- process init: Load fallback value only with valid system time (#149) (deca53f)
- REST API: Fix misleading REST API send_file error (#107) (5112ce4)
- REST API: Fix rare exception for log file handling (#112) (21e61d1)
- webui: Add missing cycle start state message (#133) (f349a2d)
- webui: Increase file handling robustness -> handle config.ini update in firmware (#90) (c348cb3)
- webui: Make REST API calls more robust (#109) (2909471)
- wlan.ini: ChangeRSSIThreshold: Fix logging issue (#111) (4c75e4e)
- wlan: Fix deletion of array object (#110) (2f0934e)
- wlan: Fix IP config output (DHCP) + Enable connection retry (#156) (869013d)
Refactoring / Style Changes
- build: Refactor board type / camera model selection (#126) (54f6847)
- Cleanup / rearrange header includes (#117) (a45431f)
- config-handling: Complete rework of internal config parameter and sequence data handling (#165) (cfc53b0)
- helper: Move functions to system_info (#82) (40f95f8)
- ota: Refactor / cleanup OTA functions ([#123](https://gith...