Skip to content

Snake MINI FW 6.3.2.4

Latest
Latest

Choose a tag to compare

View all tags
@espr14 espr14 released this 12 May 16:26
· 2057 commits to main since this release
v6.3.2.4
e7e7484

MINI FW based on 6.3.2. Appendix has to be removed if you have the original el. board. MINI CoreXY now uses spreadCycle for X and Y which increases noise but avoids motor stall.

HW versions

  • (original) MINI (including long bed)
  • MINI coreXY
  • i3 MK3.3
  • i3 MK3.5 coreXY

Improvements

  1. Skew compensation: Turns on skew compensation in Marlin and allows it to be configured with M852.
  2. PID tuning: Read nozzle and bed PID parameters and tune them automatically.
  3. Max Temps: Raises the maximum bed temperature from 100C to 110C
    and nozzle temperature from 275C to 285C (use with caution!).
  4. Settings during print: You can change Snake settings, Control and Settings during printing.
  5. Faster nozzle cooling: If you wait for nozzle cooling before MBL, you can call M109 R170 C
    which uses print fan to speed up cooling.
  6. Game: Instead of printing you can enjoy simple game.
  7. Adjust brightness: You can change brightness of the display. It does not dim the light but draws darker colors.
  8. Cold mode (min.temp.): If you enable Cold Mode, temperatures (once set) won't drop below 30°C. For safety reasons cold mode must be enabled after every start of the printer.
  9. Show MBL and tilt: After mesh bed leveling (G29) you can go to Snake Settings and see the MBL Z levels at the measured points and check the tilt of the axes. Levels are shifted to avoid negative numbers.
  10. Speed up: Parking, unparking and other moves are done faster.
  11. Different printers: Next to a standard version, other versions are released:
    1. coreXY
    2. i3 MK3.3 (i3 MK3 with MINI board, MINI display, Z motor split, and mosfet on heating)
    3. i3 MK3.5 coreXY
  12. Different languages
  13. Avoid display flashing: Some displays flash with original FW.
  14. High geared extruder: Allow up to 2000 steps/mm for extruder.
  15. Adjustable axes:
    1. length (includes long bed HW)
    2. steps/mm
    3. direction
    4. current
    5. max. feedrate (for X and Y only)
  16. Adjustable filament load length: Different extruders need different load length.
  17. Adjustable homing sensitivity: X and Y homing sensitivity can be changed in menu and saved.
Assets 21
Loading