v1.5.0

IPI Stay Fly Driver v1.5.0

Open-source replacement driver for the IPI STAY FLY wireless gaming mouse.

Added

• Auto-updater with GitHub Releases as the only source. The app checks
  releases/latest/download/latest.json on startup and shows an
  "Install & restart" banner (localized in all 9 languages) when a newer
  version exists. Updates are cryptographically signed (Tauri updater
  keypair) and verified against the public key baked into the app before
  installing — no server involved, just GitHub Releases.
• The release workflow now builds the signed update bundle
  (*.nsis.zip + .sig) and generates/uploads latest.json automatically
  on every tagged release.

Notes

• Only the installed app (NSIS setup or MSI) can self-update; the portable
  exe shows the update banner, and installing from it switches to the
  installed version.
• Apps older than 1.5.0 have no updater and must update manually one last time.

Requirements

• Windows 10/11 (64-bit)
• WebView2 runtime (pre-installed on Windows 11; download for Windows 10)

Installation

Download the portable IPI STAY FLY Driver.exe or use the Windows installer from the release assets.
The binaries are not code-signed, so Windows SmartScreen may warn on first launch.

v1.4.0

IPI Stay Fly Driver v1.4.0

Open-source replacement driver for the IPI STAY FLY wireless gaming mouse.

Full-project review release: every finding from a top-to-bottom audit of the driver was fixed.

Fixed — protocol / hardware communication

• DPI writes now target the correct stage slot. cmd_set_dpi previously ignored the stage argument and always wrote to stage 4's config address (0x18); changing DPI for stages 1–3 modified stage 4 instead. Each stage now writes to its own slot (0x0C + 4 × stage), matching the layout the driver itself reads back.
• DPI writes now compute the inner checksum instead of hardcoding 0x77. Byte 8 of the DPI frame is the same 0x55 − payload block-write checksum used by button remapping; it was hardcoded to the one captured value, so any DPI other than 5600 sent an invalid frame. All DPI values now produce a correct checksum (verified against the original capture).
• DPI values above 12800 no longer silently truncate. The raw DPI encoding (dpi/50 − 1) overflows one byte above 12800; the high bits are now carried in byte 7 (and decoded on read-back) instead of being cut off, so e.g. 42000 DPI no longer writes as 3650 DPI. Values above 12800 are extrapolated from the encoding and marked as such in the code.
• Late HID replies can no longer be attributed to the wrong command. Pending input reports are drained before every write/read exchange, so a response that arrives after a timeout is discarded instead of being parsed as the next command's reply.
• Unplug/replug now recovers immediately. Any failed command drops the cached device handle so the next call re-opens the device; previously only the 5-second status poll did this, so writes could keep failing for up to 5 s after reconnecting.
• Input validation on all write commands. DPI stage (0–3), DPI value (50–42000, step 50), debounce (0–20 ms), work mode (0–2), full-power mode (0–1), receiver LED mode (1–3) and angle (−45…45) are validated before any frame is sent to the mouse.

Fixed — demo mode & connection handling

• Button remapping no longer sends real HID writes in demo mode. The Buttons tab was the only tab not wired to demo mode / connection state; it now skips hardware calls in demo mode (as the README promises) and disables its controls when no mouse is connected.
• The hidden tray flyout no longer polls the hardware forever. The tray window polled the mouse every 3 seconds even when it had never been opened (and even in demo mode); it now only polls while actually visible and refreshes immediately when shown.
• "Connect" in the Add Device dialog now refreshes the UI immediately. It previously fired a status query whose result was thrown away, so the device card didn't update until the next 5-second poll.

Fixed — UI state & error handling

• Settings are read back from the mouse everywhere. The Lighting tab (LED mode, brightness, breathing speed), Advanced tab (full-power mode, rage-time duration, 20K FPS, angle snapping) and the debounce slider previously showed hardcoded defaults after every restart; they now hydrate from the device. Button mappings are also read back from the mouse (new cmd_read_buttons command), so the Buttons tab reflects the real assignments after a restart.
• You can actually type a DPI value now. The DPI number field clamped/normalized on every keystroke (typing "8" on the way to "800" instantly became 50); it now keeps your raw input while editing and commits on Enter or blur.
• Hardware write failures are no longer silent. Every settings handler used an empty catch {}; failures now show an error toast, and discrete controls (switches, radios, polling rate, LOD, buttons) roll back to their previous state so the UI never claims a setting the mouse didn't accept.
• Angle-snapping slider writes are debounced. Dragging the slider fired one HID write per tick; it now settles for 150 ms before writing.
• Oversized custom wallpapers can no longer white-screen the app. localStorage quota errors while persisting the wallpaper (or theme/background preferences) are caught; the wallpaper simply won't persist and a toast explains why.
• Removed the dead "Diff Capture" feature from the developer panel. It never recorded anything — the capture buffer had no writer — so the UI was removed rather than shipping a broken tool.

Fixed — internationalization

• Added the missing buttons.keyboardKey translation to es, es-MX, fr, it, pl, pt and zh (it previously fell back to English).
• Translated every hardcoded English string: section headers ("Sensor tuning", "Latency control", "Device behavior", …), the demo-mode banner and badge, the Buttons tab (button names, action names, "Restore Default", save/restore status messages), the entire Angle Snapping card, the Add Device dialog, the tray flyout, the background picker (including animation names), window-control tooltips, and error toasts — in all 9 languages.
• Removed the now-unused developer-panel capture strings and the obsolete buttons.placeholder string from all locales. All locales are verified to have identical key sets (144 keys).

Security & robustness

• Content Security Policy enabled. The Tauri webview previously ran with csp: null; a restrictive CSP now applies as defense-in-depth (relevant because the cmd_raw dev command can send arbitrary HID frames).
• Documented in the README that release binaries are unsigned (Windows SmartScreen will warn) and that the app has no auto-updater.

Added

• cmd_read_buttons Tauri command: reads the live button-slot assignments (category/code/modifier per physical button) from the mouse.
• Extended cmd_read_settings: now also returns debounce, DPI LED mode/brightness, breathing speed, 20K FPS, and angle-snapping state.
• Toast notification system for surfacing hardware errors.
• 8 new protocol unit tests (stage addressing, inner checksum, high-DPI encoding); 72 total, all capture-anchored tests still pass.

Requirements

• Windows 10/11 (64-bit)
• WebView2 runtime (pre-installed on Windows 11; download for Windows 10)

Installation

Download the portable IPI STAY FLY Driver.exe or use the Windows installer from the release assets.
The binaries are not code-signed, so Windows SmartScreen may warn on first launch.

v1.3.6

IPI Stay Fly Driver v1.3.6

Open-source replacement driver for the IPI STAY FLY wireless gaming mouse.

Requirements

• Windows 10/11 (64-bit)
• WebView2 runtime (pre-installed on Windows 11; download for Windows 10)

Installation

Download the portable IPI STAY FLY Driver.exe or use the Windows installer from the release assets.

Full Changelog: v1.3.4...v1.3.6

v1.3.5

IPI Stay Fly Driver v1.3.5

Open-source replacement driver for the IPI STAY FLY wireless gaming mouse.

Requirements

• Windows 10/11 (64-bit)
• WebView2 runtime (pre-installed on Windows 11; download for Windows 10)

Installation

Download the portable IPI STAY FLY Driver.exe or use the Windows installer from the release assets.

Full Changelog: v1.3.4...v1.3.5

v1.3.4

IPI Stay Fly Driver v1.3.4

Open-source replacement driver for the IPI STAY FLY wireless gaming mouse.

Requirements

• Windows 10/11 (64-bit)
• WebView2 runtime (pre-installed on Windows 11; download for Windows 10)

Installation

Download the portable IPI STAY FLY Driver.exe or use the Windows installer from the release assets.

Full Changelog: v1.3.3...v1.3.4

v1.3.3

IPI Stay Fly Driver v1.3.3

Open-source replacement driver for the IPI FLY PRO wireless gaming mouse.

Requirements

• Windows 10/11 (64-bit)
• WebView2 runtime (pre-installed on Windows 11; download for Windows 10)

Installation

Download the portable IPI FLY PRO Driver.exe or use the Windows installer from the release assets.

Full Changelog: v1.3.1...v1.3.3

v1.3.2

IPI Stay Fly Driver v1.3.2

Open-source replacement driver for the IPI FLY PRO wireless gaming mouse.

Requirements

• Windows 10/11 (64-bit)
• WebView2 runtime (pre-installed on Windows 11; download for Windows 10)

Installation

Download the portable IPI FLY PRO Driver.exe or use the Windows installer from the release assets.

Full Changelog: v1.3.1...v1.3.2

v1.3.1

IPI Stay Fly Driver v1.3.1

Open-source replacement driver for the IPI FLY PRO wireless gaming mouse.

Requirements

• Windows 10/11 (64-bit)
• WebView2 runtime (pre-installed on Windows 11; download for Windows 10)

Installation

Download the portable IPI FLY PRO Driver.exe or use the Windows installer from the release assets.

Full Changelog: v1.3.0...v1.3.1

v1.3.0

IPI Stay Fly Driver v1.3.0

Open-source replacement driver for the IPI FLY PRO wireless gaming mouse.

Requirements

• Windows 10/11 (64-bit)
• WebView2 runtime (pre-installed on Windows 11; download for Windows 10)

Installation

Download the portable IPI FLY PRO Driver.exe or use the Windows installer from the release assets.

Full Changelog: v1.1.2...v1.3.0

v1.2.0

IPI Stay Fly Driver v1.2.0

Open-source replacement driver for the IPI FLY PRO wireless gaming mouse.

What's new

• Animated backgrounds — pick from four ambient canvas animations via the new background button in the top bar:
  • Constellation — drifting dots connected by lines that react to your cursor
  • Floating Dots — softly rising, glowing particles
  • Starfield — a 3D star-flight effect
  • Aurora Waves — flowing layered waves
• Custom wallpaper — upload your own image as the background (auto-resized and stored locally so the UI stays readable).
• Backgrounds automatically tint to the active theme accent color, and your choice is remembered between sessions.
• Respects the system "reduced motion" setting and pauses animation when the window is hidden to save resources.

Requirements

• Windows 10/11 (64-bit)
• WebView2 runtime (pre-installed on Windows 11; download for Windows 10)

Installation

Download the portable IPI FLY PRO Driver.exe or use the Windows installer from the release assets.