-
Notifications
You must be signed in to change notification settings - Fork 0
3. Safety and Usage
SamsonT edited this page Sep 10, 2021
·
3 revisions
It's a flamethrower. It's dangerous. Please be careful. Detailed guide coming soon. Again it's a flamethrower so if you decide to build one please be responsible.
Read the WARNING section of the wiki first
| # | STEP | Details |
|---|---|---|
| 0 | Find your fire extinguisher | It should be within arms reach |
| 1 | Check your surroundings | Make sure nothing flameable or living is in proximity |
| 2 | Inspect the device | Make sure everything is secured and the ignitor is distant and in line with the nozzle |
| 3 | Check switches | The polarity switch should be in neutral or reverse |
| 4 | Power on | The device should be pointed and held away from your face and body. The lights should turn on |
| - | IGNITION | _ |
| 5 | Start the Igniter | Press the momentary buttom and check for an arc |
| 6 | Release the fuel | With the igniter arcing switch from the neutral position to the 1 or ON position |
| 7 | Control the flame | Use the rocker switch to alternate between teh 1 (on) 0 (neutral) and 2 (reverse) positions to control the amount of butane while holding the igniter button |
| - | DISABLE | - |
| 8 | Switch to reverse | Switch to teh 2 postion - pressure will be taken off teh butane can. Remain in this postitoin until the butane stops flowing |
| 9 | Switch the nuetral and off | Switch the rocker to neutral - release the ignition button |
| 10 | Switch off | The lights should turn off |
| 11 | Store in a safe location | The butane should not stay in the device - store it serperately |