v0.2.1

Install from the browser: https://themonkeyz.github.io/esp32-s3-meteobus/

Or with esptool, first install (erases saved settings):
esptool.py --chip esp32s3 write_flash 0x0 meteobus-v0.2.1-full.bin

Update keeping settings (or use Settings → Firmware on the display, v1.3.0 and later):
esptool.py --chip esp32s3 write_flash 0x0 bootloader.bin 0x8000 partition-table.bin 0x10000 meteobus-v0.2.1.bin 0x610000 ota_data_initial.bin

What's Changed

• v0.2.1-rc.1: faster zooms (42 -> 54-58 fps) and a real screen off by @TheMonkeyz in #16
• v0.2.1-rc.2: the radar plays at the tap, each frame as soon as it lands by @TheMonkeyz in #17
• Harness: --ota stops at once when the board runs a newer build by @TheMonkeyz in #18
• Release v0.2.1 (stable) by @TheMonkeyz in #19

Full Changelog: v0.2.0...v0.2.1

v0.2.1-rc.2

Install from the browser: https://themonkeyz.github.io/esp32-s3-meteobus/?channel=beta

Or with esptool, first install (erases saved settings):
esptool.py --chip esp32s3 write_flash 0x0 meteobus-v0.2.1-rc.2-full.bin

Update keeping settings (or use Settings → Firmware on the display, v1.3.0 and later):
esptool.py --chip esp32s3 write_flash 0x0 bootloader.bin 0x8000 partition-table.bin 0x10000 meteobus-v0.2.1-rc.2.bin 0x610000 ota_data_initial.bin

What's Changed

• v0.2.1-rc.2: the radar plays at the tap, each frame as soon as it lands by @TheMonkeyz in #17

Full Changelog: v0.2.1-rc.1...v0.2.1-rc.2

v0.2.1-rc.1

Install from the browser: https://themonkeyz.github.io/esp32-s3-meteobus/?channel=beta

Or with esptool, first install (erases saved settings):
esptool.py --chip esp32s3 write_flash 0x0 meteobus-v0.2.1-rc.1-full.bin

Update keeping settings (or use Settings → Firmware on the display, v1.3.0 and later):
esptool.py --chip esp32s3 write_flash 0x0 bootloader.bin 0x8000 partition-table.bin 0x10000 meteobus-v0.2.1-rc.1.bin 0x610000 ota_data_initial.bin

What's Changed

• v0.2.1-rc.1: faster zooms (42 -> 54-58 fps) and a real screen off by @TheMonkeyz in #16

Full Changelog: v0.2.0...v0.2.1-rc.1

v0.2.0

Install from the browser: https://themonkeyz.github.io/esp32-s3-meteobus/

Or with esptool, first install (erases saved settings):
esptool.py --chip esp32s3 write_flash 0x0 meteobus-v0.2.0-full.bin

Update keeping settings (or use Settings → Firmware on the display, v1.3.0 and later):
esptool.py --chip esp32s3 write_flash 0x0 bootloader.bin 0x8000 partition-table.bin 0x10000 meteobus-v0.2.0.bin 0x610000 ota_data_initial.bin

What's Changed

• Release v0.2.0 (stable) by @TheMonkeyz in #15

Full Changelog: v0.2.0-rc.6...v0.2.0

v0.2.0-rc.6

Install from the browser: https://themonkeyz.github.io/esp32-s3-meteobus/?channel=beta

Or with esptool, first install (erases saved settings):
esptool.py --chip esp32s3 write_flash 0x0 meteobus-v0.2.0-rc.6-full.bin

Update keeping settings (or use Settings → Firmware on the display, v1.3.0 and later):
esptool.py --chip esp32s3 write_flash 0x0 bootloader.bin 0x8000 partition-table.bin 0x10000 meteobus-v0.2.0-rc.6.bin 0x610000 ota_data_initial.bin

What's Changed

• My stops: a tap during a save no longer removes the wrong stop by @TheMonkeyz in #13
• Changelog: v0.2.0-rc.6 by @TheMonkeyz in #14

Full Changelog: v0.2.0-rc.5...v0.2.0-rc.6

v0.2.0-rc.5

Install from the browser: https://themonkeyz.github.io/esp32-s3-meteobus/?channel=beta

Or with esptool, first install (erases saved settings):
esptool.py --chip esp32s3 write_flash 0x0 meteobus-v0.2.0-rc.5-full.bin

Update keeping settings (or use Settings → Firmware on the display, v1.3.0 and later):
esptool.py --chip esp32s3 write_flash 0x0 bootloader.bin 0x8000 partition-table.bin 0x10000 meteobus-v0.2.0-rc.5.bin 0x610000 ota_data_initial.bin

What's Changed

• Bus map markers under the pills; bus comments and stop snapshot limits by @TheMonkeyz in #11
• Changelog: v0.2.0-rc.5 by @TheMonkeyz in #12

Full Changelog: v0.2.0-rc.4...v0.2.0-rc.5

v0.2.0-rc.4

Install from the browser: https://themonkeyz.github.io/esp32-s3-meteobus/?channel=beta

Or with esptool, first install (erases saved settings):
esptool.py --chip esp32s3 write_flash 0x0 meteobus-v0.2.0-rc.4-full.bin

Update keeping settings (or use Settings → Firmware on the display, v1.3.0 and later):
esptool.py --chip esp32s3 write_flash 0x0 bootloader.bin 0x8000 partition-table.bin 0x10000 meteobus-v0.2.0-rc.4.bin 0x610000 ota_data_initial.bin

What's Changed

• Ignore graphify-out/ by @TheMonkeyz in #5
• Fix flaky flash helper monitor test on macOS by @TheMonkeyz in #6
• Radar history: Wi-Fi power save off while a map is open by @TheMonkeyz in #7
• Docs overhaul for MeteoBus, with bus screenshots by @TheMonkeyz in #8
• Emulator: the real bus code, with two preconfigured stops by @TheMonkeyz in #9
• Changelog: v0.2.0-rc.4 by @TheMonkeyz in #10

Full Changelog: v0.2.0-rc.3...v0.2.0-rc.4

v0.2.0-rc.3

Install from the browser: https://themonkeyz.github.io/esp32-s3-meteobus/?channel=beta

Or with esptool, first install (erases saved settings):
esptool.py --chip esp32s3 write_flash 0x0 meteobus-v0.2.0-rc.3-full.bin

Update keeping settings (or use Settings → Firmware on the display, v1.3.0 and later):
esptool.py --chip esp32s3 write_flash 0x0 bootloader.bin 0x8000 partition-table.bin 0x10000 meteobus-v0.2.0-rc.3.bin 0x610000 ota_data_initial.bin

What's Changed

• v0.2.0-rc.3: bus map's second picture at the first zoom by @TheMonkeyz in #4

Full Changelog: v0.2.0-rc.2...v0.2.0-rc.3

v0.2.0-rc.2

Install from the browser: https://themonkeyz.github.io/esp32-s3-meteobus/?channel=beta

Or with esptool, first install (erases saved settings):
esptool.py --chip esp32s3 write_flash 0x0 meteobus-v0.2.0-rc.2-full.bin

Update keeping settings (or use Settings → Firmware on the display, v1.3.0 and later):
esptool.py --chip esp32s3 write_flash 0x0 bootloader.bin 0x8000 partition-table.bin 0x10000 meteobus-v0.2.0-rc.2.bin 0x610000 ota_data_initial.bin

What's Changed

• Back is a sideways swipe everywhere: maps and alerts; nothing past the edge by @TheMonkeyz in #3

Full Changelog: v0.2.0-rc.1...v0.2.0-rc.2

v0.2.0-rc.1

Install from the browser: https://themonkeyz.github.io/esp32-s3-meteobus/?channel=beta

Or with esptool, first install (erases saved settings):
esptool.py --chip esp32s3 write_flash 0x0 meteobus-v0.2.0-rc.1-full.bin

Update keeping settings (or use Settings → Firmware on the display, v1.3.0 and later):
esptool.py --chip esp32s3 write_flash 0x0 bootloader.bin 0x8000 partition-table.bin 0x10000 meteobus-v0.2.0-rc.1.bin 0x610000 ota_data_initial.bin

What's Changed

• v0.2.0: buses, bus map, radar from the weather icon, alerts at the bottom by @TheMonkeyz in #2

Full Changelog: v0.1.0-rc.2...v0.2.0-rc.1