v1.15.0

Install from the browser: https://themonkeyz.github.io/esp32-s3-weather/

Or with esptool, first install (erases saved settings):
esptool.py --chip esp32s3 write_flash 0x0 weather_amoled-v1.15.0-full.bin

Update keeping settings (or use Settings → Firmware on the display, v1.3.0 and later):
esptool.py --chip esp32s3 write_flash 0x0 bootloader.bin 0x8000 partition-table.bin 0x10000 weather_amoled-v1.15.0.bin 0x610000 ota_data_initial.bin

What's Changed

• Screen dimming from espforge's forge_presence by @TheMonkeyz in #28
• Release v1.15.0 (stable): changelog by @TheMonkeyz in #29

Full Changelog: v1.14.4...v1.15.0

v1.15.0-rc.1

Install from the browser: https://themonkeyz.github.io/esp32-s3-weather/?channel=beta

Or with esptool, first install (erases saved settings):
esptool.py --chip esp32s3 write_flash 0x0 weather_amoled-v1.15.0-rc.1-full.bin

Update keeping settings (or use Settings → Firmware on the display, v1.3.0 and later):
esptool.py --chip esp32s3 write_flash 0x0 bootloader.bin 0x8000 partition-table.bin 0x10000 weather_amoled-v1.15.0-rc.1.bin 0x610000 ota_data_initial.bin

What's Changed

• Screen dimming from espforge's forge_presence by @TheMonkeyz in #28

Full Changelog: v1.14.4...v1.15.0-rc.1

v1.14.4

Install from the browser: https://themonkeyz.github.io/esp32-s3-weather/

Or with esptool, first install (erases saved settings):
esptool.py --chip esp32s3 write_flash 0x0 weather_amoled-v1.14.4-full.bin

Update keeping settings (or use Settings → Firmware on the display, v1.3.0 and later):
esptool.py --chip esp32s3 write_flash 0x0 bootloader.bin 0x8000 partition-table.bin 0x10000 weather_amoled-v1.14.4.bin 0x610000 ota_data_initial.bin

What's Changed

• docs/MACOS.md: a fixed test label for the designer's builds by @TheMonkeyz in #17
• flash_helper.py: restart through the test console, keeping the boot log by @TheMonkeyz in #19
• List scrolls: render the edge the list left once it stops (Inuktitut pictest, row 359) by @TheMonkeyz in #16
• webtest: a review screenshot that can't be captured no longer fails the test by @TheMonkeyz in #20
• webtest: wait for Save before reading the places (flaky map-tap test) by @TheMonkeyz in #21
• Web flasher in French and Inuktitut, and a translation sync check by @TheMonkeyz in #22
• French owner's guide (docs/guide.fr.md), up to date with the README by @TheMonkeyz in #23
• CLAUDE.md: note espforge candidates in its backlog by @TheMonkeyz in #24
• espforge v0.3.0-rc.1; console restarts in the PowerShell helpers (v1.14.4-rc.1) by @TheMonkeyz in #25
• espforge v0.3.0 (stable) by @TheMonkeyz in #26
• Release v1.14.4 (stable): changelog by @TheMonkeyz in #27

Full Changelog: v1.14.3...v1.14.4

v1.14.4-rc.1

Install from the browser: https://themonkeyz.github.io/esp32-s3-weather/?channel=beta

Or with esptool, first install (erases saved settings):
esptool.py --chip esp32s3 write_flash 0x0 weather_amoled-v1.14.4-rc.1-full.bin

Update keeping settings (or use Settings → Firmware on the display, v1.3.0 and later):
esptool.py --chip esp32s3 write_flash 0x0 bootloader.bin 0x8000 partition-table.bin 0x10000 weather_amoled-v1.14.4-rc.1.bin 0x610000 ota_data_initial.bin

What's Changed

• docs/MACOS.md: a fixed test label for the designer's builds by @TheMonkeyz in #17
• flash_helper.py: restart through the test console, keeping the boot log by @TheMonkeyz in #19
• List scrolls: render the edge the list left once it stops (Inuktitut pictest, row 359) by @TheMonkeyz in #16
• webtest: a review screenshot that can't be captured no longer fails the test by @TheMonkeyz in #20
• webtest: wait for Save before reading the places (flaky map-tap test) by @TheMonkeyz in #21
• Web flasher in French and Inuktitut, and a translation sync check by @TheMonkeyz in #22
• French owner's guide (docs/guide.fr.md), up to date with the README by @TheMonkeyz in #23
• CLAUDE.md: note espforge candidates in its backlog by @TheMonkeyz in #24
• espforge v0.3.0-rc.1; console restarts in the PowerShell helpers (v1.14.4-rc.1) by @TheMonkeyz in #25
• espforge v0.3.0 (stable) by @TheMonkeyz in #26

Full Changelog: v1.14.3...v1.14.4-rc.1

v1.14.3

Install from the browser: https://themonkeyz.github.io/esp32-s3-weather/

Or with esptool, first install (erases saved settings):
esptool.py --chip esp32s3 write_flash 0x0 weather_amoled-v1.14.3-full.bin

Update keeping settings (or use Settings → Firmware on the display, v1.3.0 and later):
esptool.py --chip esp32s3 write_flash 0x0 bootloader.bin 0x8000 partition-table.bin 0x10000 weather_amoled-v1.14.3.bin 0x610000 ota_data_initial.bin

What's Changed

• Radar past frames load faster: overlap downloads and decoding, skip empty lightning (v1.14.3-rc.1) by @TheMonkeyz in #12
• Try it in your browser: settings page below, brightness, dimming with the microphone, wake on pick-up by @TheMonkeyz in #14
• Changelog: v1.14.3-rc.2 by @TheMonkeyz in #15
• Release v1.14.3 (stable) by @TheMonkeyz in #18

Full Changelog: v1.14.2...v1.14.3

v1.14.3-rc.2

Install from the browser: https://themonkeyz.github.io/esp32-s3-weather/?channel=beta

Or with esptool, first install (erases saved settings):
esptool.py --chip esp32s3 write_flash 0x0 weather_amoled-v1.14.3-rc.2-full.bin

Update keeping settings (or use Settings → Firmware on the display, v1.3.0 and later):
esptool.py --chip esp32s3 write_flash 0x0 bootloader.bin 0x8000 partition-table.bin 0x10000 weather_amoled-v1.14.3-rc.2.bin 0x610000 ota_data_initial.bin

What's Changed

• Radar past frames load faster: overlap downloads and decoding, skip empty lightning (v1.14.3-rc.1) by @TheMonkeyz in #12
• Try it in your browser: settings page below, brightness, dimming with the microphone, wake on pick-up by @TheMonkeyz in #14
• Changelog: v1.14.3-rc.2 by @TheMonkeyz in #15

Full Changelog: v1.14.2...v1.14.3-rc.2

v1.14.3-rc.1

Install from the browser: https://themonkeyz.github.io/esp32-s3-weather/?channel=beta

Or with esptool, first install (erases saved settings):
esptool.py --chip esp32s3 write_flash 0x0 weather_amoled-v1.14.3-rc.1-full.bin

Update keeping settings (or use Settings → Firmware on the display, v1.3.0 and later):
esptool.py --chip esp32s3 write_flash 0x0 bootloader.bin 0x8000 partition-table.bin 0x10000 weather_amoled-v1.14.3-rc.1.bin 0x610000 ota_data_initial.bin

Full Changelog: v1.14.2...v1.14.3-rc.1

v1.14.2

Install from the browser: https://themonkeyz.github.io/esp32-s3-weather/

Or with esptool, first install (erases saved settings):
esptool.py --chip esp32s3 write_flash 0x0 weather_amoled-v1.14.2-full.bin

Update keeping settings (or use Settings → Firmware on the display, v1.3.0 and later):
esptool.py --chip esp32s3 write_flash 0x0 bootloader.bin 0x8000 partition-table.bin 0x10000 weather_amoled-v1.14.2.bin 0x610000 ota_data_initial.bin

What's Changed

• Place switch internal RAM 31 -> 44 KB, Inuktitut slow scrolls, 4-bit map tiles (v1.14.2-rc.2) by @TheMonkeyz in #10
• Release v1.14.2 (stable) by @TheMonkeyz in #11

Full Changelog: v1.14.1...v1.14.2

v1.14.2-rc.2

Install from the browser: https://themonkeyz.github.io/esp32-s3-weather/?channel=beta

Or with esptool, first install (erases saved settings):
esptool.py --chip esp32s3 write_flash 0x0 weather_amoled-v1.14.2-rc.2-full.bin

Update keeping settings (or use Settings → Firmware on the display, v1.3.0 and later):
esptool.py --chip esp32s3 write_flash 0x0 bootloader.bin 0x8000 partition-table.bin 0x10000 weather_amoled-v1.14.2-rc.2.bin 0x610000 ota_data_initial.bin

Full Changelog: v1.14.2-rc.1...v1.14.2-rc.2

v1.14.2-rc.1

Install from the browser: https://themonkeyz.github.io/esp32-s3-weather/?channel=beta

Or with esptool, first install (erases saved settings):
esptool.py --chip esp32s3 write_flash 0x0 weather_amoled-v1.14.2-rc.1-full.bin

Update keeping settings (or use Settings → Firmware on the display, v1.3.0 and later):
esptool.py --chip esp32s3 write_flash 0x0 bootloader.bin 0x8000 partition-table.bin 0x10000 weather_amoled-v1.14.2-rc.1.bin 0x610000 ota_data_initial.bin

Full Changelog: v1.14.1...v1.14.2-rc.1