Enclosure (latest)

The printable enclosure for TigerScale V3, as a Bambu Studio project with the
plates already laid out. Open it in Bambu Studio or Orca Slicer; any slicer that
reads 3MF will open it too, though the plate arrangement is Bambu-specific.

This release is the permanent home of the latest enclosure. The download link
never changes, so anything pointing here always gets the current file:

https://github.com/TigerTag-Project/Tiger-Scale-V3/releases/download/enclosure/TigerScale-V3-enclosure.3mf

Parts

Part	What it is
base	Bottom shell, carries the load cell and the HX711
plateau	The platform the spool sits on
suporte	Load-cell support
ecran	Display bezel for the 3.5" touchscreen
tampa	Top cover
tampa rfid	Cover over the NFC reader bay
traseira	Back panel

The project also carries a leftover test body; it is not part of the enclosure and
does not need printing.

Revisions

• rev 1 — first published version, the one the reference unit was built from.

Notes

• The enclosure is versioned separately from the firmware: it does not have to
  match your firmware version, and it is not reattached to each firmware release.
• Wiring, the bill of materials and the antenna spacing the enclosure assumes are
  in docs/HARDWARE.md.