OpenRevelare v1.8.6.3

v1.8.6.3（2026-10-22）

修复

• 修复同一 RAW 原片的母本与虚拟副本使用不同裁切时，重开工程后成片预览显示错误范围、与导出不一致的问题。预览现在正确读取各自的裁切区域；已有工程无需重新裁切。
• 修复印样横竖照片混排时被拉伸、最后一行编号被底栏遮挡的问题。

新增与改进

• HDR HEIC 导出新增 Adaptive HDR（标准增益图） 选项，可选择 sRGB 或 Display P3 基底；支持 HEIC 的普通查看器显示 SDR，支持标准增益图的 HDR 查看器可恢复高光，实际效果取决于系统和应用支持。
• 默认保留直接 BT.2020 PQ 导出；导出界面提示直接 PQ 通常体积较小、Adaptive HDR 通常体积较大。大尺寸增益图采用较低分辨率并单独压缩，减少额外体积，同时支持完整文件大小限制。
• 印样排版更规整、饱满：完整行两端与底端对齐，末行不足时左对齐；保留照片原比例和顺序，沿用新版模板的留白节奏，减少多余空白。

---

Fixed

• Fixed incorrect photo preview framing after reopening projects where an original RAW frame and its virtual copies have different crops. Previews now read each frame's crop region correctly and match exports; existing projects do not need to be cropped again.
• Fixed stretched photos in contact sheets with mixed orientations and final-row frame numbers hidden by the footer.

Added and improved

• Added Adaptive HDR (ISO gain map) HEIC exports with an sRGB or Display P3 base. Standard HEIC viewers display SDR; HDR viewers supporting ISO gain maps can restore highlights. Actual HDR presentation depends on the OS and app.
• Direct BT.2020 PQ remains the default. Export hints explain that PQ files are usually smaller than Adaptive HDR files. Large gain maps use a reduced resolution and separate compression to reduce overhead, with file-size limits covering the complete container.
• More balanced, fuller contact sheets: full rows align at both sides and along the bottom, while an incomplete final row stays left-aligned. Preserves photo proportions and order, with spacing consistent with the new template and less excess whitespace.

---

macOS / Linux 为 Beta，欢迎回报问题。

macOS 首次打开

本软件未经 Apple 公证，系统会提示「已损坏」或「无法验证开发者」——不是文件损坏。
拖进「应用程序」后任选一种：

1. 终端执行 xattr -dr com.apple.quarantine /Applications/OpenRevelare.app
2. 双击一次被拦后 → 系统设置 → 隐私与安全性 → 「仍要打开」

（macOS 15 起「右键 → 打开」这个入口已被 Apple 取消，请用上面两条。）

OpenRevelare v1.8.6.1

修复

• 修复新导入、裁切和成片调整后误提示“标定来自旧版模型”的问题。
• 修复印样预览与导出排版不一致的问题。
• 优化印样自动排版，减少四周留白，末行无需填满。

新增与改进

• 高像素 RAW 导入与自动去色罩更快，减少等待和界面卡顿。
• HEIC 导出支持自动硬件加速，不支持时自动回退；降低高像素 HDR 照片导出的内存占用。
• 印样导出新增小、中、大三档，约 6、12、24 MP，默认中档并记住选择。

---

Fixed

• Fixed incorrect old-model calibration warnings after importing, cropping or adjusting photos.
• Fixed contact-sheet layout differences between previews and exports.
• Improved automatic contact-sheet layout with smaller margins, allowing an incomplete final row.

Added and improved

• Faster high-resolution RAW import and automatic roll calibration, with less waiting and freezing.
• Automatic hardware acceleration for HEIC exports, with software fallback and lower memory use for high-resolution HDR photos.
• Added small, medium and large contact-sheet exports at approximately 6, 12 and 24 MP. Defaults to medium and remembers your choice.

---

macOS / Linux 为 Beta，欢迎回报问题。

macOS 首次打开

本软件未经 Apple 公证，系统会提示「已损坏」或「无法验证开发者」——不是文件损坏。
拖进「应用程序」后任选一种：

1. 终端执行 xattr -dr com.apple.quarantine /Applications/OpenRevelare.app
2. 双击一次被拦后 → 系统设置 → 隐私与安全性 → 「仍要打开」

（macOS 15 起「右键 → 打开」这个入口已被 Apple 取消，请用上面两条。）

OpenRevelare v1.8.6

修复

• 工程保存与重开更可靠。 关闭时会等待保存；失败可重试或另存恢复副本。其他窗口修改同一工程时会提示冲突。LCC 等校正选择会保留，缺失原片或参考时会提醒并阻止错误导出。
• 编辑与同步更安全。 移除、添加和排序照片可撤销；整组同步失败不会留下半套修改。重定位原片会核对内容特征，避免误用同名文件。
• 整卷导出可恢复。 单张失败不会中断其他照片；重开工程后仍可查看结果，只重试未完成项目。工程或参考改变时会阻止沿用旧任务。
• 修正颜色与缓存问题。 HDR JPEG 在普通 SDR 查看器中的颜色更准确，齿孔填白不再被调色染色；替换原片后不会继续显示旧预览。已有 HDR JPEG 需要重新导出。
• 改善 HDR JPEG 与 DNG 的兼容性。 让更多查看软件正确读取导出的照片。导出时会提示 TIFF 的手机相册支持限制，以及 DNG 可能只显示缩略图的情况。已有文件需要重新导出。

新增与改进

• 整卷导出支持逐张填写 EXIF。 在胶片拍摄信息侧栏通过左右按钮切换照片，并查看缩略图和帧序号；机身、镜头默认同步整卷，取消各自同步后可单张修改。ISO、光圈、快门、焦距、拍摄时间等参数独立保存，导出重试和任务恢复也会保留逐张信息。
• 新增 HEIC 导出。 支持导出普通或 HDR 照片，可选择输出尺寸和文件大小限制；HDR 显示需要设备和查看器支持。导出窗口可直接选择 HEIC、JPEG、TIFF、DNG 等格式，胶片拍摄信息可在侧栏填写。
• 工程可以连同原片归档。 可一起保存原片、校正参考和自定义 LUT，并查看所需文件清单；取消或复制失败不会留下不完整的归档。
• 智能色偏修正更易判断。 最多分析 30 轮，结果稳定时提前结束；完成后直接提示结果，不确定时可检查画面、撤销或改用灰卡采样。
• 常用界面更简洁。 导入以添加照片为主，同步详情按需查看；导出摘要和保存失败提醒保持可见。“第一卷”指南补充了操作与恢复步骤。
• 浏览更流畅。 空闲时预热相邻照片，并补充预览及 RAW 读取、解压和处理的分阶段性能诊断，便于定位卡顿。
• 图像处理支持自适应 GPU 加速。 支持 Windows 与 macOS，可加速缩放、输出锐化和胶片风格 LUT 插值；导出时可在 GPU 上连续完成缩放与锐化，减少数据传输。默认按实测选择较快的方式，持续变慢时自动退回 CPU，也可在偏好设置中关闭。实际导出提速取决于照片、设置和设备，RAW 解码、ICC 转换与文件编码仍使用 CPU。
• 低显存设备处理更稳。 分配前检查显存预算，锐化支持分块处理；显存不足时仅回退当前任务，后续照片仍可使用 GPU 加速。
• 多种格式导出更快。 优化 JPEG、TIFF 和 DNG 的导出速度，减少限制文件大小时的重复处理。实际提速取决于照片尺寸、导出设置和设备。

---

Fixed

• More reliable project saves and reopening. Closing waits for edits to save; failures allow retry or a recovery copy. Conflicting changes from another window are detected. Calibration choices are retained, while missing originals or references are reported before export.
• Safer editing and syncing. Photo removal, addition and reordering can be undone. Failed group syncs leave existing edits intact. Relinking checks more than a matching filename.
• Recoverable roll exports. One failed photo does not stop the rest. Reopen the project to review results and retry unfinished items; changed projects or references block stale retries.
• Corrected colour and cache issues. HDR JPEG colours are more accurate in ordinary SDR viewers, white sprocket fill stays white, and replaced originals no longer show stale previews. Existing HDR JPEGs need re-exporting.
• Improved HDR JPEG and DNG compatibility. More viewers can read exported photos correctly. Export hints explain limited TIFF support in phone galleries and cases where DNG files show only a thumbnail. Existing files need re-exporting.

Added and improved

• Per-photo EXIF editing in roll exports. Switch between photos with left and right buttons in the film capture side panel, with a thumbnail and frame number for reference. Camera and lens details sync across the roll by default; turn off either sync to override that photo. ISO, aperture, shutter speed, focal length and capture time stay independent for each photo, including export retries and task recovery.
• New HEIC export. Export SDR or HDR photos with output size and file-size controls. HDR display requires a compatible device and viewer. Choose HEIC, JPEG, TIFF or DNG directly in the export window, and enter film capture details in a side panel.
• Portable project archives. Save originals, calibration references and custom LUTs with the project, and review its required files. Cancelled or failed copies do not leave incomplete archives.
• Clearer smart color-cast correction. Analysis can run for up to 30 rounds and stops early when stable. Uncertain results offer clear advice to inspect, undo or use a grey card.
• Less clutter in common tasks. Import focuses on adding photos, sync details appear on demand, and export summaries and save failures remain visible. The First roll guide covers the workflow and recovery.
• Smoother browsing. Adjacent photos are prepared while idle, with added phase timings for previews and RAW reading, unpacking and processing to investigate delays.
• Adaptive GPU acceleration. Supports resizing, output sharpening and film-look LUT interpolation on Windows and macOS. Exports can resize and sharpen on the GPU in one sequence to reduce transfers. The app selects the faster method through measurement and falls back to CPU after sustained slowdowns; acceleration can also be disabled in Preferences. Overall export gains depend on the photo, settings and device; RAW decoding, ICC conversion and file encoding remain on CPU.
• More reliable processing with limited GPU memory. Checks the memory budget before allocation and supports tiled sharpening. Insufficient GPU memory sends only the current operation to CPU, allowing later photos to continue using acceleration.
• Faster exports across formats. Improved JPEG, TIFF and DNG export performance, with less repeated processing when limiting file size. Actual gains depend on photo dimensions, export settings and device.

---

macOS / Linux 为 Beta，欢迎回报问题。

macOS 首次打开

本软件未经 Apple 公证，系统会提示「已损坏」或「无法验证开发者」——不是文件损坏。
拖进「应用程序」后任选一种：

1. 终端执行 xattr -dr com.apple.quarantine /Applications/OpenRevelare.app
2. 双击一次被拦后 → 系统设置 → 隐私与安全性 → 「仍要打开」

（macOS 15 起「右键 → 打开」这个入口已被 Apple 取消，请用上面两条。）

OpenRevelare v1.8.5.1

v1.8.5.1（2026-10-14）

修复

• 修复 HDR 增益图 JPEG 导出的高光颜色偏差。 增益图改为分别保存 RGB 通道的增益，避免仅恢复亮度时沿用 SDR 基底的高光颜色，使支持逐通道增益图的查看软件能更准确地还原 HDR 预览中的高光颜色。适用于 sRGB 和 Display P3 基底，需要重新导出照片。
• 正确显示和识别四段修复版本号。 保留 1.8.5.1 的第四段，避免升级后仍将自身识别为 1.8.5、反复提示同一更新。

改进

• 降低原尺寸 HDR JPEG 导出的计算和内存开销。 复用增益图计算缓冲区，并行统计通道增益范围；2400 万像素合成图测试中，增益图计算耗时约减少 30%，临时内存分配减少约 288 MB。实际整张导出耗时取决于原图尺寸、解码和渲染设置。

---

Fixed

• Corrected highlight colour differences in HDR gain-map JPEG exports. Gain maps now store separate RGB gains instead of restoring luminance alone and retaining the SDR base's highlight colour. Viewers supporting per-channel gain maps can reconstruct HDR preview highlights more accurately. Applies to sRGB and Display P3 bases; photos must be exported again.
• Preserved four-part hotfix version numbers. The app now identifies itself as 1.8.5.1 rather than truncating it to 1.8.5, preventing repeated notices for the same update after upgrading.

Improved

• Reduced computation and memory overhead for full-resolution HDR JPEG exports. Gain-map computation reuses its buffer and determines channel gain ranges in parallel. A 24-megapixel synthetic benchmark showed approximately 30% less gain-map computation time and 288 MB less temporary allocation. Total export time depends on source dimensions, decoding and render settings.

OpenRevelare v1.8.5

v1.8.5（2026-10-14）

改进

• 齿孔同步更顺手，底栏更紧凑。 齿孔遮罩开关旁新增小型同步按钮，无需展开设置即可同步；风格选择框不再横跨底栏，给其他操作留出更多空间。
• 耗时操作可以随时取消。 导出照片、生成或导出印样、智能色偏修正时，可直接点击状态旁的“取消”。当前步骤结束后任务停止，已导出的文件会保留。
• 等待任务时可以继续切换照片。 任务进度持续显示；整卷导出与印样按开始时的照片和调整完成，不受后续编辑影响。智能色偏修正完成后应用到原来的照片，不会误改刚切换到的照片。
• 扩展更多相机的 RAW 支持。 更新 RAW 解码组件，扩展对佳能 EOS R1 / R5 Mark II、富士 X-T50 / GFX 100S II、索尼 A9 III / A7CR、尼康 Z6 III / Z8（标准压缩）及松下 GH7 / S9 等相机的支持，并加入新版松下 RAW 编码支持。Windows、Linux 与 macOS 使用相同版本，具体机型与拍摄模式仍需实拍验证。
• Windows 安装更省事。 RAW 解码无需额外安装 VC++ 运行库；Linux 继续兼容 Ubuntu 22.04 及更新系统。

OpenRevelare v1.8.4

v1.8.4（2026-10-11）

改进

• GUI 优化。 统一紧凑控件、灰阶分区与文字对比度，居中图库 / 修片切换，压缩顶部和预览下方工具栏；图库卡片宽度自适应，卷数与介绍移入侧栏，释放浏览空间，并改善窗口缩放时的组件遮挡及对话框布局。
• 按数字中间片流程整理校准与成片调整。 输入状态、校正来源、适用条件和镜头 / 平场控件集中在“输入与校正详情”，可直接查看本帧校准依据。LUT 明确为独立外观处理，不参与输入设备标定；省略两页顶部的灰色说明，减少常驻文字。
• 齿孔遮罩默认关闭，开关保持可见。 新导入胶卷不再自动启用遮罩；可直接勾选“启用齿孔遮罩”，并在“齿孔设置”中预览遮罩、调整阈值。自动校准仍会独立排除检测到的灯板区域。
• 齿孔同步独立于 Cineon。 新增“同步齿孔遮罩”按钮，仅同步启用状态与阈值；优先应用到勾选帧，未勾选时应用到整卷，不改动色彩与裁切。
• 方向处理集中到负片 / 对比按钮附近。 左右旋转、水平 / 垂直翻转，以及“同步旋转 / 翻转 / 拉直”放在预览工具栏同一区域；原几何折叠区改为“裁切”，保留裁切相关控件与独立同步入口。

修复

• 避免校正来源串卷。 普通导入会清理上一卷的 RGB 分光与平场参考路径，防止旧来源进入新卷的报告和工程文件。
• 降低无齿孔画面的片基被误判为灯板、导致大面积扣白的风险。 齿孔识别结合色彩关系、边缘片基形态及齿孔排列规律，不再仅依赖亮度；对过曝和接近中性的浅色片基采用更保守的判断。

---

Improved

• GUI refinements. Unified compact controls, neutral surfaces and text contrast; centred the Library / Develop switch and streamlined the top and preview toolbars. Adaptive library cards and a sidebar for roll counts and introductory text free up browsing space, while responsive layouts reduce clipping and overlap when resizing windows and dialogs.
• Calibration and photo adjustments follow the digital-intermediate workflow. Input status, correction sources, applicability and lens / flat-field controls are grouped under Input and correction details, with direct access to the frame report. LUTs are clearly separate look processing, independent of input-device calibration. Grey introductory text is removed from both tabs to reduce persistent text.
• Sprocket masking now defaults to off, with its switch always visible. Newly imported rolls no longer enable the mask automatically. Enable it directly, then preview the mask and adjust its threshold under Sprocket settings. Automatic calibration still independently excludes detected light-board regions.
• Sprocket sync is separate from Cineon sync. The new Sync sprocket mask button copies only the enabled state and threshold to checked frames, or the whole roll when none are checked, without changing colour or crop settings.
• Orientation controls sit beside Negative / Compare. Counterclockwise / clockwise rotation, horizontal / vertical flips, and Sync rotation / flips / straighten are grouped in the preview toolbar. The former geometry section is now Crop, retaining crop controls and its separate sync action.

Fixed

• Prevented correction provenance leaking between rolls. Plain imports clear the previous roll's RGB separation and flat-field reference paths so old sources cannot enter the new roll's report or project file.
• Reduced the risk of film base being mistaken for the light board and whitening large areas in images without sprocket holes. Detection now combines colour relationships, peripheral film-base geometry and repeated-hole alignment rather than relying on brightness alone, with more conservative handling of clipped captures and thin, nearly neutral film bases.

OpenRevelare v1.8.3

v1.8.3（2026-09-29）

改进

• 新增非破坏性手动除尘，支持修复 / 擦除笔连续涂抹、红色蒙版范围预览，以及 [ / ] 调整笔刷大小；修复结果同步用于预览和导出。

修复

• 裁切选框拖动卡顿及 Windows 预览切换黑屏。
• 降低整卷自动分析的内存峰值和闪退风险；诊断命令空输入也能安全退出。
• Windows 与 macOS 预览缓存会随内存压力回收远处图片，同时保留当前及相邻帧；后台优先预热两侧邻帧，切换图片更流畅。

---

Improved

• Added non-destructive manual dust removal with continuous Repair / Erase brush strokes, red mask previews, and [ / ] brush-size shortcuts; repairs apply consistently to preview and export.

Fixed

• Fixed crop-frame dragging lag and the black transition when switching Windows previews.
• Reduced roll-analysis memory peaks and crash risk; diagnostic commands now handle empty input safely.
• On Windows and macOS, the preview cache releases distant frames under memory pressure while retaining the current and adjacent frames; background warm-up prioritizes both neighbours for smoother switching.

OpenRevelare v1.8.2

v1.8.2

改进

• 预览与诊断更流畅。 拖动参数、切换波形图或直方图时减少重复处理，过期的预览任务会及时停止。
• 底片与观感调整更直观。 标签与图标更易区分；高光、阴影和主 D_max 调整更好地保持色彩，旧工程可按提示迁移到新版色彩管理。
• 自动校准更可靠。 整卷与单张校准更能适应不同画面和片基，失败或切换胶卷时不会留下不完整、过期的结果；同时修复部分画面校准后过暗的问题。主界面只保留“可靠 / 参考 / 需确认”，详细依据可在技术报告中查看。
• RAW、TIFF 与大图处理更稳健。 异常色彩信息会安全回退，不兼容的校正参考图会提前提示；大图校正占用更少内存。
• 印样信息区更像完整的实验室记录。 仅显示已填写内容，支持同时记录 ISO / EI，并改进排版、字体与 Revelare 来源签章。

---

Improved

• Preview and diagnostics feel smoother. Parameter changes and waveform/histogram switching avoid repeated work, while obsolete preview tasks stop promptly.
• Negative and look controls are clearer. Labels and icons are easier to distinguish; highlight, shadow and master D_max adjustments preserve colour more naturally, and legacy projects can migrate to the new colour-managed rendering with clear guidance.
• Automatic calibration is more reliable. Roll-wide and single-frame calibration handle varied scenes and film bases better, and failed or cancelled analysis cannot leave partial or stale results. This also fixes some images becoming too dark after calibration. The main panel now shows simple confidence labels, with details kept in the technical report.
• RAW, TIFF and large-image processing are more robust. Invalid colour metadata falls back safely, incompatible correction references are caught early, and large-image correction uses less memory.
• Contact-sheet details now read like a complete lab record. Empty fields collapse automatically, ISO and EI can be recorded together, and the typography, spacing and Revelare provenance signature have been refined.

OpenRevelare v1.8.1

v1.8.1

品牌与发行资源

• 更新应用图标至新版胶片标识，并同步 Windows、Avalonia 窗口、关于页与 macOS 图标资源。

构图同步与交互改进

• 底片、观感与构图同步明确分离。 Cineon / Display 同步不再携带旋转、翻转、拉直或裁切；几何面板提供独立的“同步旋转 / 翻转 / 拉直”和“同步裁切”，裁切会按目标帧自己的底片区域重新定位，适用于半格与不同分格的工程。
• 修复裁切编辑状态下复制 / 粘贴可能丢失裁切的问题。 复制和粘贴现在使用可保存快照，不会把裁切工具的临时渲染状态写回工程。
• 降低信息密集区域的认知负荷。 胶片条和预览区右键菜单按帧操作、底片、观感和构图分组；顶栏工具按钮补充明确的工作区 / 编辑提示。
• 胶片条新增“全选帧”和“清除选择”。 可直接准备下一次批量复制、同步或结构操作。

改进

• 印样重新平衡画面与卷信息。 自动排版改为按照片实际占页面积选择行列；原表格式标识栏改为更有分量的四行实验室记录页脚，只显示已填写内容，并使用独立放置的 Revelare 文字 Logo（深色版使用负片反相版本）。页脚高度为紧凑初版的两倍以上；独立页眉取消，让照片网格上移，避免放大页脚后重新撑出宽边。卷号 / 胶卷 / 帧数归入记录区首行，不再与 Logo 混排；其后三行依次为相机 / ISO / 日期、冲洗店 / 工艺 / 地点，以及独占末行的备注。外边距与帧号带保持紧凑，未满的末条仍像真实 contact sheet 一样左对齐；排版字体使用更接近胶片边码的 Bahnschrift（不可用时回退到 Noto Sans / Inter）。自动调整以及 1:1 / 4:3 / 3:2、横竖比例选择完整保留。

• 胶片条多选支持 Ctrl 点选与 Shift 连选。批量创建虚拟副本、移除帧、粘贴参数或同步几何后，会自动取消全部勾选。

• Linux HDR 预览明确延后至 Avalonia 提供安全接口。Linux 继续使用有明确诊断的 SDR surface；HDR 调整、增益图 JPEG 与 float32 TIFF 导出不受影响，不再规划通过私有 Wayland handle 实现。

---

Improved

• Updated the application icon to the new film mark, including the Windows, Avalonia window, About dialog and macOS icon resources.

• Negative, look and composition sync are now explicit layers. Cineon / Display sync never carries rotation, flips, straighten or crop; the Geometry / crop panel provides separate sync commands, and crop rectangles are rebased onto each target negative for half-frame and mixed-split rolls.

• Copying or pasting while the crop tool is open no longer loses the crop. Parameter operations now use a storage snapshot instead of the crop tool's temporary render state.

• Dense interaction areas are grouped by intent. Film-strip and preview context menus separate frame operations, negative sync, look sync and composition sync; toolbar actions have clearer workspace and editing hints.

• The film strip now offers Select all frames and Clear selection for preparing the next batch operation.

• Contact sheets now balance frames and roll information. Automatic layout chooses rows and columns by actual photo coverage; the former form is now a substantial four-row lab-record footer containing only filled-in details and a separately placed Revelare wordmark (with a negative-inverted dark variant). The footer is more than twice the compact first revision's height. The separate header is gone, allowing the photo grid to rise and preventing the larger footer from recreating broad side borders. Roll number / film / frame count occupy the record's first row rather than sharing the logo lock-up; camera / ISO / date, lab / process / location, and Notes on its own final row follow. Print margins and frame-number bands stay tight, while a short final strip remains left-aligned like a physical contact print; typography uses film-edge-like Bahnschrift with Noto Sans / Inter fallbacks. Auto fitting and all 1:1 / 4:3 / 3:2 wide/tall choices remain available.

• The film strip supports Ctrl-click selection and Shift-click ranges. After creating virtual copies, removing frames, pasting parameters or syncing geometry in a batch, all ticks are cleared automatically.

• Linux HDR display preview is explicitly deferred until Avalonia provides a safe API. Linux keeps a clearly diagnosed SDR surface; HDR editing, gain-map JPEG and float32 TIFF export are unaffected, and private Wayland handles are no longer an implementation path.

OpenRevelare v1.8.0

v1.8.0

改进

• 黑白负片模式。整卷校准顶部勾选「黑白负片（整卷）」；与银影无关的白平衡、智能色偏修正与逐通道控件随之隐藏，灰卡采样保留（它定的是曝光位置），切回彩色时参数完整保留。选用印片风格时，印片自身的色偏仍会叠加在中性结果之上。

• Display 白平衡新增吸管。在正片上框选应为中性的区域即可解出色温与色调，不触及 Cineon 两端。

• 示波器新增波形图，溢出阈值开放调整。过曝 / 欠曝由固定的 2% / 98% 改为可调，随程序保存。

• 导出新增文件名命名，长边尺寸精确落位。从六种现成命名里选一个（原文件名、卷名 + 序号、冲洗日期 + 卷名 + 序号等），旁边即时显示这一帧的实际文件名，要别的可选「自定义…」按字段拼；单张导出据此预填保存对话框的名字。尺寸可选择允许放大。

• 导出新增输出锐化。四档：无（保留颗粒）/ 低 / 标准 / 高；在缩放之后、写文件之前施加，只作用于亮度以避免彩色边缘出现彩边。线性 TIFF、线性 DNG 与 HDR 输出不做锐化。

• 新增线性 DNG 导出。去除显示曲线的正片，在 Lightroom / Camera Raw 中可用 RAW 面板调整。反相与帧编辑已烘焙其中，并非相机 RAW 的原样封装。

• 导出弹窗重排。分节成卡片、控件对齐同一列，不适用的选项直接隐藏而不是置灰，提示文字收短。窗口不再超出屏幕，Esc 关闭、Enter 确认。

• 新增【帮助 → 本帧技术报告】。逐项列出本帧渲染所依赖的数值及其来源，支持一键复制。

• 放大至 100% 可见真实像素。

• 缩放时补丁边缘的接缝显著减少。

• 放大后的局部全分辨率出图更快。

• 100% 缩放改按源像素 1:1 计，读数计入显示器缩放。

• 图库支持排序。可选依据：添加时间（默认）、最近修改、最近打开、卷名、卷号、冲洗日期，可切换正倒序；该项为空的卷排在末尾。

• 胶片条支持批量操作。勾选多帧后，右键「创建虚拟副本」「从卷中移除」对每个勾选帧执行。

• 虚拟副本继承母帧的全部参数，含 Display 参数与裁切。

• 几何 / 裁切面板新增同步按钮。将本帧的旋转、翻转与拉直应用于勾选帧，未勾选时应用于整卷；不含裁切。

• 预览区右键菜单精简并标注快捷键。

修复

• 满幅扫描不再被判为存在灯板、整卷大面积发白。

• 尼康 High Efficiency / HE★ 的 NEF 不再显示为彩条。LibRaw 不支持这两种压缩，请改用无损压缩或先转为 16-bit TIFF。

• 从图库重新进入当前卷，不再丢失尚未自动保存的修改。

• 切卷时中止上一卷的整卷分析，其结果不再落入随后打开的卷。

---

Improved

• Black-and-white negatives have a mode of their own. Tick "Black-and-white negative (whole roll)" at the top of Roll calibration; white balance, Deep-WB and the per-channel controls are hidden with it, while the grey-card sampler stays because it sets the exposure anchor. Switching back to colour restores every parameter. A print film emulation still adds its own cast on top of the neutral result.

• The Display white balance has an eyedropper. Drag over something on the positive that ought to be neutral to solve temperature and tint, leaving the Cineon ends alone.

• A waveform, and adjustable clipping thresholds. The over- and under-exposure ends are now adjustable instead of a fixed 2% / 98%, saved with the application.

• Export takes a filename template, and the long edge lands exactly on the number asked for. The template takes {Original} / {Seq} / {Roll} / {RollNo} / {Camera} / {Film} / {Date}, a field left empty is dropped along with its separator, and enlargement is available as a choice.

• Output sharpening on export. Four levels: none (keeps the grain), low, standard and high. It is applied after the resize and before the file is written, on luminance alone so that coloured edges do not gain a fringe. Linear TIFF, linear DNG and HDR exports are not sharpened.

• Linear DNG export. The finished positive with the display curve removed, which Lightroom and Camera Raw open with the raw panel live. It is not a repackaged camera RAW: the inversion and the frame edits are baked in.

• Help → Frame technical report. Every number this frame's rendering rests on, each with its source, with a copy button.

• Zooming to 100% shows real pixels.

• Far less of a seam around the patch while zooming.

• The full-resolution patch arrives faster when zoomed in.

• 100% zoom now means one source pixel per screen pixel, with display scaling accounted for.

• The library can be sorted. By added time (the default), last modified, last opened, roll name, roll number or dev date, either direction; a roll whose field is empty goes last.

• The film strip supports batch actions. With several frames ticked, right-click "Create virtual copy" and "Remove from roll" act on each ticked frame.

• A virtual copy now takes every parameter of its parent, Display parameters and crop included.

• A sync button in the Geometry / crop panel applies this frame's rotation, flips and straighten to the ticked frames, or to the whole roll when none are ticked; the crop is not included.

• The preview's right-click menu is shorter and shows its shortcuts.

Fixed

• A full-bleed scan is no longer read as having a light board and whitened across the roll.

• Nikon High Efficiency / HE★ NEFs no longer show as colour bars. LibRaw supports neither codec; re-shoot losslessly or convert to 16-bit TIFF first.

• Re-entering the open roll from the library no longer loses edits that autosave had not yet written.

• A roll-wide analysis is cancelled when the roll changes, so its result no longer lands on the roll opened next.