Skip to content

Provisioning

Jump to bottom
Tristan Israël edited this page Feb 2, 2026 · 6 revisions

This page describes various methods to provision a device with a Safecor-based system.

Manual

Manual provisioning consists of going through an installation process step-by-step using a USB drive.

1 - Create an installation USB stick for Alpine Linux.

  • The Alpine Linux version must match the desired repository version.
  • The ISO image used must be Alpine Standard.

2 - Install Alpine Linux on the device.

  • Assign a network interface with either DHCP or a static IP depending on the context.
  • In the APK Mirror section, if using an internet repository, select f, otherwise do not select any menu entry but manually enter the URL of the local Alpine main repository.
  • Create an admin user account.

3 - Reboot the system at the end of the installation.

4 - After reboot, log in as admin.

5 - Add binary repositories

  • Type $ su - root and enter the password defined during the installation.
  • Run # vi /etc/apk/repositories and add the community repository, the Safecor repository, and any product-specific repositories.
  • Save and exit with :wq.
  • Run # apk update

6 - Add PGP keys

  • Run # cd /etc/apk/keys then # wget [Safecor repository URL]/safecor.rsa.pub, and repeat the process for other product-specific repositories.
  • Run # apk update.

7 - (Optional, only in development phase) Allow the admin user to execute root commands

  • Run # apk add sudo, then # visudo
  • Edit the line # %wheel ALL=(ALL:ALL) NOPASSWD: ALL and remove the # to uncomment it.
  • Save and exit with :wq
  • Type # exit

8 - Install XEN

  • Run $ sudo apk add xen xen-hypervisor
  • Run $ sudo reboot
  • On reboot, select the first GRUB entry labeled with Xen
  • After booting, log in as root
  • Start the Xen service with # rc-service xenstored start

9 - Install the product following the provided documentation.

Automatic

This procedure helps creating an ISO image with an application embedded. This is the official process of creating a bootable product ISO that can be booted as an ISO or as an USB drive.

The following example is based on Safecor Diagnostic app.

Procedure:

  • Prepare an Alpine development machine (see Development.md).
  • Provision the public and private keys of the product's repository.
  • Clone aports from gitlab : $ git clone --depth=1 https://gitlab.alpinelinux.org/alpine/aports.git.
  • Copy the files genapkovl-diag.sh and mkimg.diag.sh in aports/scripts.
  • Make these scripts executable (chmod +x)
  • Enter the scripts dir : $ cd aports/scripts
  • Run mkimage : $ TMPDIR=~/tmp ./mkimage.sh --tag v3.22 --outdir ~/iso --arch x86_64 --repository https://www.alefbet.net/github/safecor --repository http://dl-cdn.alpinelinux.org/alpine/v3.21/main --repository http://dl-cdn.alpinelinux.org/alpine/v3.21/community --profile diag --hostkeys --workdir ~/tmp
  • At the end, the ISO image will be created in ~/iso.

The ISO image can be burnt on a DVD-ROM or copied on a USB key.

Clone this wiki locally