Skip to content

Configuring vShield Edge VPN Endpoints

Jump to bottom
Rob Coward edited this page Oct 19, 2016 · 2 revisions

Given the tunnel configuration below, this page will show you how to use the ukcloud-vpn tool to configure a vShield Edge device as an IPsec VPN endpoint.

OpenStack Network          pfSense                           VPN Endpoint                 Remote Network
-----------------          -------                           ------------                 --------------
                       LAN: 192.168.1.254                    LAN: 10.1.1.1
192.168.1.0/24 <-----> WAN: 172.16.1.XXX     <-------------> WAN: YYY.YYY.YYY.YYY <-----> 10.1.1.0/24
                       Floating IP: XXX.XXX.XXX.XXX

Pre-shared Key: D3v0psD3m0D3v0psD3m0D3v0psD3m0D3v0psD3m0

Installing the ukcloud-vpn tool

ukcloud

Clone this wiki locally