-
Notifications
You must be signed in to change notification settings - Fork 41
Installing the gateway software on the Turris Omnia
Dave Hylands edited this page Jul 16, 2019
·
2 revisions
- Copy the gateway medkit onto a USB thumb drive. There should only be one file on the thumb drive which starts with omnia-medkit.
- Insert the USB thumb drive into one of the USB ports on the Turris Omnia
- Press and hold the reset button until 4 LEDS (power, 0, 1, and 2) are lit. Release the reset button. I put a youtube video showing the entire process.
- It takes about 2 minutes for the image to be written
- It takes about 30 seconds for the new image to boot
- It takes about 2 minutes for the gateway to startup (it still runs webpack)
- You should then be able to connect to WebThings Gateway XXXX WiFi AP and browse to gateway.local (or 192.168.2.1) - currently the captive portal isn't working.
- The Foris user interface is available on http://gateway.local:81 or https://gateway.local:444
- The gateway interface is available on ports 80 and 8080 and https on 443 and 4443 (same as the Raspbian image)