Active Power Limit control not working after update HA core 2026.6.4 and operating system 18.0 #998
StefanWouters0201
started this conversation in
General
Replies: 2 comments 1 reply
|
These logs are actually from pymodbus, but it means the inverter did not respond. |
0 replies
|
i will check this later, after the update of HA, all readings where good, temp, voltage, amp etc. So communication was runningn and ok. |
1 reply
|
@StefanWouters0201 |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Uh oh!
There was an error while loading. Please reload this page.
Describe the bug
After the update, the active power control setting goes to 0 and can no longer be adjusted to another value.
Expected behavior
that the value can be adjusted as expected
Screenshots
No response
Diagnostic File
Deze fout is ontstaan door een aangepaste integratie.
Logger: pymodbus.logging
Bron: custom_components/solaredge_modbus_multi/hub.py:559
Integratie: SolarEdge Modbus Multi (documentatie, problemen)
Eerst voorgekomen: 20:00:04 (24 gebeurtenissen)
Laatst gelogd: 20:31:13
No response received after 3 retries, continue with next request >>>>> send: 0xf 0x16 0x0 0x0 0x0 0x6 0xe3 0x3 0x0 0x5 0x0 0x1 >>>>> recv: 0xf 0x16 0x0 0x0 0x0 0x5 0xe3 0x3 0x2 0x9 0x18 extra data: >>>>> send: 0xf 0x17 0x0 0x0 0x0 0x6 0xe3 0x3 0x0 0x1f 0x0 0x1 >>>>> recv: 0xf 0x17 0x0 0x0 0x0 0x5 0xe3 0x3 0x2 0x0 0x3 extra data: >>>>> send: 0xf 0x18 0x0 0x0 0x0 0x6 0xe3 0x3 0x0 0x40 0x0 0x1 >>>>> recv: 0xf 0x18 0x0 0x0 0x0 0x5 0xe3 0x3 0x2 0x0 0x0 extra data: >>>>> send: 0xf 0x19 0x0 0x0 0x0 0x6 0xe3 0x3 0x0 0x22 0x0 0x1 >>>>> recv: 0xf 0x19 0x0 0x0 0x0 0x5 0xe3 0x3 0x2 0x0 0x0 extra data: >>>>> send: 0xf 0x1a 0x0 0x0 0x0 0x6 0xe3 0x3 0x0 0x24 0x0 0x1 >>>>> recv: 0xf 0x1a 0x0 0x0 0x0 0x5 0xe3 0x3 0x2 0x0 0x0 extra data: >>>>> send: 0xf 0x1b 0x0 0x0 0x0 0x6 0x20 0x3 0x4 0x5 0x0 0x1 >>>>> recv: 0xf 0x1b 0x0 0x0 0x0 0x5 0x20 0x3 0x2 0x1 0xdb extra data: >>>>> send: 0xf 0x1c 0x0 0x0 0x0 0x6 0x20 0x3 0x4 0x9 0x0 0x1 >>>>> recv: 0xf 0x1c 0x0 0x0 0x0 0x5 0x20 0x3 0x2 0x1 0xd0 extra data: >>>>> send: 0xf 0x1d 0x0 0x0 0x0 0x6 0x20 0x3 0x4 0xd 0x0 0x1 >>>>> recv: 0xf 0x1d 0x0 0x0 0x0 0x5 0x20 0x3 0x2 0x1 0xce extra data: >>>>> send: 0xf 0x1e 0x0 0x0 0x0 0x6 0x18 0x3 0xc 0xe8 0x0 0x1 >>>>> recv: 0xf 0x1e 0x0 0x0 0x0 0x5 0x18 0x3 0x2 0xb 0x62 extra data: >>>>> send: 0xf 0x1f 0x0 0x0 0x0 0x6 0x19 0x3 0xc 0xe8 0x0 0x1 >>>>> recv: 0xf 0x1f 0x0 0x0 0x0 0x5 0x19 0x3 0x2 0xa 0xab extra data:
Cancel send, because not connected! >>>>> recv: 0xf 0xdd 0x0 0x0 0x0 0x5 0xe3 0x3 0x2 0x0 0x0 extra data: >>>>> send: 0xf 0xde 0x0 0x0 0x0 0x6 0x20 0x3 0x4 0x5 0x0 0x1 >>>>> recv: 0xf 0xde 0x0 0x0 0x0 0x5 0x20 0x3 0x2 0x1 0xc8 extra data: >>>>> send: 0xf 0xdf 0x0 0x0 0x0 0x6 0x20 0x3 0x4 0x9 0x0 0x1 >>>>> recv: 0xf 0xdf 0x0 0x0 0x0 0x5 0x20 0x3 0x2 0x1 0xbb extra data: >>>>> send: 0xf 0xe0 0x0 0x0 0x0 0x6 0x20 0x3 0x4 0xd 0x0 0x1 >>>>> recv: 0xf 0xe0 0x0 0x0 0x0 0x5 0x20 0x3 0x2 0x1 0xb5 extra data: >>>>> send: 0xf 0xe1 0x0 0x0 0x0 0x6 0x18 0x3 0xc 0xe8 0x0 0x1 >>>>> recv: 0xf 0xe1 0x0 0x0 0x0 0x5 0x18 0x3 0x2 0xb 0x59 extra data: >>>>> send: 0xf 0xe2 0x0 0x0 0x0 0x6 0x19 0x3 0xc 0xe8 0x0 0x1 >>>>> recv: 0xf 0xe2 0x0 0x0 0x0 0x5 0x19 0x3 0x2 0xa 0xa5 extra data: >>>>> send: 0x5 0x13 0x0 0x0 0x0 0x6 0x1 0x3 0xa8 0x1 0x0 0x1 >>>>> send: 0x0 0x1 0x0 0x0 0x0 0x9 0x1 0x10 0xf0 0x1 0x0 0x1 0x2 0x0 0x64 >>>>> recv: 0x0 0x1 0x0 0x0 0x0 0x6 0x1 0x10 0xf0 0x1 0x0 0x1 extra data: >>>>> send: 0x0 0x2 0x0 0x0 0x0 0x6 0x1 0x3 0x9c 0x6c 0x0 0x8 >>>>> recv: 0x0 0x2 0x0 0x0 0x0 0x13 0x1 0x3 0x10 0x30 0x30 0x30 0x33 0x2e 0x32 0x35 0x33 0x37 0x0 0x0 0x0 0x0 0x0 0x0 0x0 extra data: >>>>> send: 0x0 0x3 0x0 0x0 0x0 0x6 0x1 0x3 0x9c 0x85 0x0 0x28 >>>>> send: 0x5 0x13 0x0 0x0 0x0 0x6 0x1 0x3 0xa8 0x1 0x0 0x1 >>>>> recv: 0x5 0x13 0x0 0x0 0x0 0x5 0x1 0x3 0x2 0x0 0xc8 extra data: >>>>> send: 0x5 0x14 0x0 0x0 0x0 0x6 0x1 0x3 0x9c 0x52 0x0 0x1
Cancel send, because not connected! >>>>> send: 0x5 0x14 0x0 0x0 0x0 0x6 0x1 0x3 0x9c 0x52 0x0 0x1 >>>>> recv: 0x5 0x14 0x0 0x0 0x0 0x5 0x1 0x3 0x2 0x1 0xa4 extra data:
Cancel send, because not connected! >>>>> send: 0x5 0x15 0x0 0x0 0x0 0x6 0x1 0x3 0xa9 0xaf 0x0 0x1 >>>>> recv: 0x5 0x15 0x0 0x0 0x0 0x5 0x1 0x3 0x2 0x0 0x5a extra data:
No response received after 3 retries, continue with next request >>>>> send: 0xf 0xf0 0x0 0x0 0x0 0x6 0xe3 0x3 0x0 0x5 0x0 0x1 >>>>> recv: 0xf 0xf0 0x0 0x0 0x0 0x5 0xe3 0x3 0x2 0x9 0x68 extra data: >>>>> send: 0xf 0xf1 0x0 0x0 0x0 0x6 0xe3 0x3 0x0 0x1f 0x0 0x1 >>>>> recv: 0xf 0xf1 0x0 0x0 0x0 0x5 0xe3 0x3 0x2 0x0 0x3 extra data: >>>>> send: 0xf 0xf2 0x0 0x0 0x0 0x6 0xe3 0x3 0x0 0x40 0x0 0x1 >>>>> recv: 0xf 0xf2 0x0 0x0 0x0 0x5 0xe3 0x3 0x2 0x0 0x0 extra data: >>>>> send: 0xf 0xf3 0x0 0x0 0x0 0x6 0xe3 0x3 0x0 0x22 0x0 0x1 >>>>> recv: 0xf 0xf3 0x0 0x0 0x0 0x5 0xe3 0x3 0x2 0x0 0x0 extra data: >>>>> send: 0xf 0xf4 0x0 0x0 0x0 0x6 0xe3 0x3 0x0 0x24 0x0 0x1 >>>>> recv: 0xf 0xf4 0x0 0x0 0x0 0x5 0xe3 0x3 0x2 0x0 0x0 extra data: >>>>> send: 0xf 0xf5 0x0 0x0 0x0 0x6 0x20 0x3 0x4 0x5 0x0 0x1 >>>>> recv: 0xf 0xf5 0x0 0x0 0x0 0x5 0x20 0x3 0x2 0x1 0xc8 extra data: >>>>> send: 0xf 0xf6 0x0 0x0 0x0 0x6 0x20 0x3 0x4 0x9 0x0 0x1 >>>>> recv: 0xf 0xf6 0x0 0x0 0x0 0x5 0x20 0x3 0x2 0x1 0xbb extra data: >>>>> send: 0xf 0xf7 0x0 0x0 0x0 0x6 0x20 0x3 0x4 0xd 0x0 0x1 >>>>> recv: 0xf 0xf7 0x0 0x0 0x0 0x5 0x20 0x3 0x2 0x1 0xb7 extra data: >>>>> send: 0xf 0xf8 0x0 0x0 0x0 0x6 0x18 0x3 0xc 0xe8 0x0 0x1 >>>>> recv: 0xf 0xf8 0x0 0x0 0x0 0x5 0x18 0x3 0x2 0xb 0x59 extra data: >>>>> send: 0xf 0xf9 0x0 0x0 0x0 0x6 0x19 0x3 0xc 0xe8 0x0 0x1 >>>>> recv: 0xf 0xf9 0x0 0x0 0x0 0x5 0x19 0x3 0x2 0xa 0xa5 extra data:
Debug logs
Home Assistant Version
2026.6.4 and operating system 18.0
solaredge-modbus-multi Version
3.2.5
Installation Type
HAOS
Read the Instructions
Additional Context
No response
All reactions