Skip to content

Wakes v0.7.2

Choose a tag to compare

View all tags
@github-actions github-actions released this 07 Oct 04:00
· 2 commits to main since this release
v0.7.2
67f80bd
This commit was created on GitHub.com and signed with GitHub’s verified signature.
GPG key ID: B5690EEEBB952194
Verified
Learn about vigilant mode.

What's New in v0.7.2

  • v0.7.0 - USB Audio OUT: Wakes now supports audio output over USB. When you plug it into an audio-capable host (Mac, iPad, OP-1f, OP-XY etc.etc.), it'll show up as an audio input called "Wakes Audio Out". By default, the SP-1's onboard speaker goes quiet while connected this way.
  • v0.7.0 - audio.ini: a new config file sets the USB output level, and whether the speaker stays on while recording. Its default setting parks VOL at -6dB while plugged in.
  • v0.7.0 - MIDI clock timing now accounts for the USB audio path.
  • v0.7.0 - New device name: the SP-1 now shows up as "Wakes" by Worldwave, so make sure to re-select the MIDI port in your DAW and reconfigure your clock settings for it.
  • v0.7.1 - Full-range sweeping: The bottom of Plaits' OCTV fader (F1 on the SETTINGS page) now unlocks FREQ completely, allowing you to sweep the full frequency range with no centre-detent. For the freaks out there.
  • v0.7.2 - GTLT - a new Wakes-unique Marbles t-side parameter on SHFT-F1. It tilts t1's and t3's maximum output strength relative to eachother. t2 is unaffected. Additionally, Marbles' UX is a little smoother, with less accidental fader movements, thanks to enabling some Mutable Instruments convenience features taken from Plaits.

Claude's Blurb

Flashing

Read docs/SAFETY.md first. The SP-1 has no hardware reset pin.

  1. Open https://solderless.engineering in a browser and connect the SP-1 over USB-C.
  2. Hold Track 1 + Track 4 while plugging in. The four track lights go solid.
  3. Select wakes-sp1-v0.7.2.bin, flash, then unplug and replug.

wakes-sp1.bin is the same file under a fixed name, for the README's download link.
Check the file against SHA256SUMS before flashing.
wakes-sp1-v0.7.2-fallback.bin is the test-tone build without Plaits or Marbles,
for diagnosing hardware only. It is not the instrument.

Size vs v0.7.1

plaits vs v0.7.1

Config: plaits

base head Δ of total
FLASH (.bin) 427,648 427,776 +128 46.83%
RAM 178,314 178,427 +113 68.06%
Sections that changed
section base head Δ
text 243,732 243,852 +120
bss 57,606 57,719 +113
check_image 
check_image: build/zephyr
  [PASS] _vector_table at 0x20000  (0x20000)
  [PASS] no load segment below 0x20000  (lowest LMA 0x20000)
  [PASS] no load segment at or above 0xFF000  (image ends 0x88700)
  [PASS] wakes-sp1.bin matches the ELF's loadable span  (427776 B vs 427776 B)
  [PASS] .map: FLASH region origin 0x20000  (0x20000)
  [PASS] .map: FLASH region ends at 0xFF000  (0xff000)
  [PASS] .map: _vector_table at 0x20000  (0x0000000000020000)
  [PASS] CONFIG_USE_DT_CODE_PARTITION=y  (got y)
  [PASS] CONFIG_FLASH_LOAD_OFFSET=0x20000  (got 0x20000)
  [PASS] CONFIG_WATCHDOG=y  (got y)
  [PASS] CONFIG_REBOOT=y  (got y)
  [PASS] CONFIG_CLOCK_CONTROL_NRF_K32SRC_SYNTH=y  (got y)
  [PASS] one layout per Plaits/Marbles class  (175 classes)
  [PASS] plaits::sp1_zero calls nothing (#36)  (152 B, leaf)
  [PASS] ParticleEngine::Reset clears without memset (#36)  (no libc fill)
  [PASS] String::Reset clears without memset (#36)  (no libc fill)
  [PASS] uacring_push copies without memcpy/memset (M5c)  (word copies)
  [PASS] uacring_pop copies without memcpy/memset (M5c)  (word copies)
  [PASS] frames_copy copies without memcpy/memset (M5c)  (word copies)
  [PASS] SP1_FORCE_CALIB is 0  (got 0)
wakes-sp1.bin: 427776 B (46.83% of the slot), plaits config
OK: safe to hand over for flashing

fallback vs v0.7.1

Config: fallback

base head Δ of total
FLASH (.bin) 86,560 86,560 0 9.48%
RAM 124,499 124,499 0 47.49%
check_image 
check_image: build/zephyr
  [PASS] _vector_table at 0x20000  (0x20000)
  [PASS] no load segment below 0x20000  (lowest LMA 0x20000)
  [PASS] no load segment at or above 0xFF000  (image ends 0x35220)
  [PASS] wakes-sp1.bin matches the ELF's loadable span  (86560 B vs 86560 B)
  [PASS] .map: FLASH region origin 0x20000  (0x20000)
  [PASS] .map: FLASH region ends at 0xFF000  (0xff000)
  [PASS] .map: _vector_table at 0x20000  (0x0000000000020000)
  [PASS] CONFIG_USE_DT_CODE_PARTITION=y  (got y)
  [PASS] CONFIG_FLASH_LOAD_OFFSET=0x20000  (got 0x20000)
  [PASS] CONFIG_WATCHDOG=y  (got y)
  [PASS] CONFIG_REBOOT=y  (got y)
  [PASS] CONFIG_CLOCK_CONTROL_NRF_K32SRC_SYNTH=y  (got y)
  [PASS] SP1_FORCE_CALIB is 0  (got 0)
wakes-sp1.bin: 86560 B (9.48% of the slot), fallback config
OK: safe to hand over for flashing

SHA-256

86014023f983a9ee9ae4340ae242f2458c412ca7bc833f835f76ccaac2f7ac47  wakes-sp1-v0.7.2-fallback.bin
1a6230059ef17ad28ba51f7f5c085387ef1592f0f42159df0e764ae6d8c571c3  wakes-sp1-v0.7.2.bin
1a6230059ef17ad28ba51f7f5c085387ef1592f0f42159df0e764ae6d8c571c3  wakes-sp1.bin
Assets 8
Loading