Esp32-s3 sudden compile error

[Davidhndrsn70]

I have been working on a project using this board : "Amazon.com" and using TFT_eSPI. Everything has been working fine until i tryed to add wifi. I started using the following includes:
#include <WiFi.h>
#include <WebServer.h>
#include <WebSocketsServer.h>
#include <ArduinoJson.h>

This lead to an error that lead to me uninstalling Arduino, deleting the Arduino 15 folder (C:\Users\david\AppData\Local\Arduino15), and reinstalling Arduino.

This solved the WIFI issue but now TFT is not compiling. I tried going back through all of the setup steps found in this document for arduino: GitHub - Xinyuan-LilyGO/T-Display-S3 1

I went back to using an example project to see if there was somthing wrong with my code however the example gives the exact same error message wihle trying to compile.

This is the code:

#include "TFT_eSPI.h"
#include "install.h"

TFT_eSPI tft= TFT_eSPI();
TFT_eSprite sprite = TFT_eSprite(&tft);

void setup() {
tft.init();
tft.setRotation(1);
tft.setSwapBytes(true);
tft.fillScreen(TFT_WHITE);
tft.pushImage(106, 0, 214, 170, install);

sprite.createSprite(146,170);

sprite.setTextColor(TFT_BLACK,TFT_WHITE);
sprite.setTextDatum(4);
}

//progress bar variables
int progress=0;
int w=120;
int h=18;
int x=12;
int y=90;
int blocks=0;

void loop() {
sprite.fillSprite(TFT_WHITE);
sprite.setFreeFont(&Orbitron_Light_24);
sprite.drawString("Progress:",75,16);
sprite.setFreeFont(&Orbitron_Light_32);

sprite.drawString(String(progress)+"%",75,54);

progress++;
if(progress==101)
progress=0;

blocks =progress/5;
sprite.drawRoundRect(x,y,w,h,3,TFT_BLACK);
for(int i=0;i<blocks;i++)
sprite.fillRect(i5+(x+2)+(i1),y+4,5,10,TFT_BLACK);
sprite.drawRect(10,124,60,22,TFT_BLACK);
sprite.drawRect(76,124,60,22,TFT_BLACK);
sprite.drawString("OK",40,134,2);
sprite.drawString("CANCEL",106,134,2);
sprite.setTextFont(0);
sprite.drawString("Installation almost done!!",80,160);
sprite.pushSprite(0,0);
delay(60);
}

This is the error:

In file included from c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\TFT_eSPI.h:94,
from c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp:16:
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.c: In member function 'uint8_t TFT_eSPI::readByte()':
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:466:20: error: 'GPIO' was not declared in this scope
466 | #define RD_L GPIO.out_w1tc = (1 << TFT_RD)
| ^~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.c:98:3: note: in expansion of macro 'RD_L'
98 | RD_L;
| ^~~~
In file included from c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp:20:
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.c:100:9: error: 'gpio_input_get' was not declared in this scope; did you mean 'gpio_num_t'?
100 | reg = gpio_input_get(); // Read three times to allow for bus access time
| ^~~~~~~~~~~~~~
| gpio_num_t
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.c: In member function 'void TFT_eSPI::pushBlock(uint16_t, uint32_t)':
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:356:26: error: 'GPIO' was not declared in this scope
356 | #define GPIO_CLR_REG GPIO.out1_w1tc.val
| ^~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:432:31: note: in expansion of macro 'GPIO_CLR_REG'
432 | #define tft_Write_16(C) GPIO_CLR_REG = GPIO_OUT_CLR_MASK; GPIO_SET_REG = set_mask((uint8_t) ((C) >> 8)); WR_H;
| ^~~~~~~~~~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.c:547:5: note: in expansion of macro 'tft_Write_16'
547 | tft_Write_16(color);
| ^~~~~~~~~~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:356:26: error: 'GPIO' was not declared in this scope
356 | #define GPIO_CLR_REG GPIO.out1_w1tc.val
| ^~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:432:31: note: in expansion of macro 'GPIO_CLR_REG'
432 | #define tft_Write_16(C) GPIO_CLR_REG = GPIO_OUT_CLR_MASK; GPIO_SET_REG = set_mask((uint8_t) ((C) >> 8)); WR_H;
| ^~~~~~~~~~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.c:558:23: note: in expansion of macro 'tft_Write_16'
558 | else while (len--) {tft_Write_16(color);}
| ^~~~~~~~~~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.c: In member function 'void TFT_eSPI::pushSwapBytePixels(const void*, uint32_t)':
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:356:26: error: 'GPIO' was not declared in this scope
356 | #define GPIO_CLR_REG GPIO.out1_w1tc.val
| ^~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:432:31: note: in expansion of macro 'GPIO_CLR_REG'
432 | #define tft_Write_16(C) GPIO_CLR_REG = GPIO_OUT_CLR_MASK; GPIO_SET_REG = set_mask((uint8_t) ((C) >> 8)); WR_H;
| ^~~~~~~~~~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.c:568:20: note: in expansion of macro 'tft_Write_16'
568 | while ( len-- ) {tft_Write_16(data); data++;}
| ^~~~~~~~~~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.c: In member function 'void TFT_eSPI::pushPixels(const void, uint32_t)':
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:356:26: error: 'GPIO' was not declared in this scope
356 | #define GPIO_CLR_REG GPIO.out1_w1tc.val
| ^~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:432:31: note: in expansion of macro 'GPIO_CLR_REG'
432 | #define tft_Write_16(C) GPIO_CLR_REG = GPIO_OUT_CLR_MASK; GPIO_SET_REG = set_mask((uint8_t) ((C) >> 8)); WR_H;
| ^~~~~~~~~~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.c:578:37: note: in expansion of macro 'tft_Write_16'
578 | if(_swapBytes) { while ( len-- ) {tft_Write_16(*data); data++; } }
| ^~~~~~~~~~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:356:26: error: 'GPIO' was not declared in this scope
356 | #define GPIO_CLR_REG GPIO.out1_w1tc.val
| ^~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:436:32: note: in expansion of macro 'GPIO_CLR_REG'
436 | #define tft_Write_16S(C) GPIO_CLR_REG = GPIO_OUT_CLR_MASK; GPIO_SET_REG = set_mask((uint8_t) ((C) >> 0)); WR_H;
| ^~~~~~~~~~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.c:579:27: note: in expansion of macro 'tft_Write_16S'
579 | else { while ( len-- ) {tft_Write_16S(*data); data++;} }
| ^~~~~~~~~~~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp: In member function 'void TFT_eSPI::spiwrite(uint8_t)':
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:356:26: error: 'GPIO' was not declared in this scope
356 | #define GPIO_CLR_REG GPIO.out1_w1tc.val
| ^~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:412:27: note: in expansion of macro 'GPIO_CLR_REG'
412 | #define tft_Write_8(C) GPIO_CLR_REG = GPIO_OUT_CLR_MASK; GPIO_SET_REG = set_mask((uint8_t)(C)); WR_H
| ^~~~~~~~~~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp:950:3: note: in expansion of macro 'tft_Write_8'
950 | tft_Write_8(c);
| ^~~~~~~~~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp: In member function 'void TFT_eSPI::writecommand(uint8_t)':
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:167:20: error: 'GPIO' was not declared in this scope
167 | #define DC_C GPIO.out_w1tc = (1 << TFT_DC)
| ^~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp:964:3: note: in expansion of macro 'DC_C'
964 | DC_C;
| ^~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp: In member function 'void TFT_eSPI::writedata(uint8_t)':
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:168:20: error: 'GPIO' was not declared in this scope
168 | #define DC_D GPIO.out_w1ts = (1 << TFT_DC)
| ^~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp:1012:3: note: in expansion of macro 'DC_D'
1012 | DC_D; // Play safe, but should already be in data mode
| ^~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp: In member function 'virtual void TFT_eSPI::drawChar(int32_t, int32_t, uint16_t, uint32_t, uint32_t, uint8_t)':
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:356:26: error: 'GPIO' was not declared in this scope
356 | #define GPIO_CLR_REG GPIO.out1_w1tc.val
| ^~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:432:31: note: in expansion of macro 'GPIO_CLR_REG'
432 | #define tft_Write_16(C) GPIO_CLR_REG = GPIO_OUT_CLR_MASK; GPIO_SET_REG = set_mask((uint8_t) ((C) >> 8)); WR_H;
| ^~~~~~~~~~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp:3167:32: note: in expansion of macro 'tft_Write_16'
3167 | if (column[k] & mask) {tft_Write_16(color);}
| ^~~~~~~~~~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:356:26: error: 'GPIO' was not declared in this scope
356 | #define GPIO_CLR_REG GPIO.out1_w1tc.val
| ^~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:432:31: note: in expansion of macro 'GPIO_CLR_REG'
432 | #define tft_Write_16(C) GPIO_CLR_REG = GPIO_OUT_CLR_MASK; GPIO_SET_REG = set_mask((uint8_t) ((C) >> 8)); WR_H;
| ^~~~~~~~~~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp:3168:15: note: in expansion of macro 'tft_Write_16'
3168 | else {tft_Write_16(bg);}
| ^~~~~~~~~~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:356:26: error: 'GPIO' was not declared in this scope
356 | #define GPIO_CLR_REG GPIO.out1_w1tc.val
| ^~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:432:31: note: in expansion of macro 'GPIO_CLR_REG'
432 | #define tft_Write_16(C) GPIO_CLR_REG = GPIO_OUT_CLR_MASK; GPIO_SET_REG = set_mask((uint8_t) ((C) >> 8)); WR_H;
| ^~~~~~~~~~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp:3171:7: note: in expansion of macro 'tft_Write_16'
3171 | tft_Write_16(bg);
| ^~~~~~~~~~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp: In member function 'virtual void TFT_eSPI::setWindow(int32_t, int32_t, int32_t, int32_t)':
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:167:20: error: 'GPIO' was not declared in this scope
167 | #define DC_C GPIO.out_w1tc = (1 << TFT_DC)
| ^~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp:3419:5: note: in expansion of macro 'DC_C'
3419 | DC_C; tft_Write_8(TFT_CASET);
| ^~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp: In member function 'void TFT_eSPI::readAddrWindow(int32_t, int32_t, int32_t, int32_t)':
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:167:20: error: 'GPIO' was not declared in this scope
167 | #define DC_C GPIO.out_w1tc = (1 << TFT_DC)
| ^~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp:3495:3: note: in expansion of macro 'DC_C'
3495 | DC_C; tft_Write_8(TFT_CASET);
| ^~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp: In member function 'virtual void TFT_eSPI::drawPixel(int32_t, int32_t, uint32_t)':
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:167:20: error: 'GPIO' was not declared in this scope
167 | #define DC_C GPIO.out_w1tc = (1 << TFT_DC)
| ^~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp:3677:7: note: in expansion of macro 'DC_C'
3677 | DC_C; tft_Write_8(TFT_CASET);
| ^~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:167:20: error: 'GPIO' was not declared in this scope
167 | #define DC_C GPIO.out_w1tc = (1 << TFT_DC)
| ^~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp:3684:7: note: in expansion of macro 'DC_C'
3684 | DC_C; tft_Write_8(TFT_PASET);
| ^~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:167:20: error: 'GPIO' was not declared in this scope
167 | #define DC_C GPIO.out_w1tc = (1 << TFT_DC)
| ^~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp:3690:3: note: in expansion of macro 'DC_C'
3690 | DC_C; tft_Write_8(TFT_RAMWR);
| ^~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp: In member function 'virtual void TFT_eSPI::pushColor(uint16_t)':
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:356:26: error: 'GPIO' was not declared in this scope
356 | #define GPIO_CLR_REG GPIO.out1_w1tc.val
| ^~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:432:31: note: in expansion of macro 'GPIO_CLR_REG'
432 | #define tft_Write_16(C) GPIO_CLR_REG = GPIO_OUT_CLR_MASK; GPIO_SET_REG = set_mask((uint8_t) ((C) >> 8)); WR_H;
| ^~~~~~~~~~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:625:25: note: in expansion of macro 'tft_Write_16'
625 | #define tft_Write_16N tft_Write_16
| ^~~~~~~~~~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp:3711:3: note: in expansion of macro 'tft_Write_16N'
3711 | tft_Write_16N(color);
| ^~~~~~~~~~~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp: In member function 'virtual int16_t TFT_eSPI::drawChar(uint16_t, int32_t, int32_t, uint8_t)':
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:356:26: error: 'GPIO' was not declared in this scope
356 | #define GPIO_CLR_REG GPIO.out1_w1tc.val
| ^~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:432:31: note: in expansion of macro 'GPIO_CLR_REG'
432 | #define tft_Write_16(C) GPIO_CLR_REG = GPIO_OUT_CLR_MASK; GPIO_SET_REG = set_mask((uint8_t) ((C) >> 8)); WR_H;
| ^~~~~~~~~~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp:5250:31: note: in expansion of macro 'tft_Write_16'
5250 | if (line & mask) {tft_Write_16(textcolor);}
| ^~~~~~~~~~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:356:26: error: 'GPIO' was not declared in this scope
356 | #define GPIO_CLR_REG GPIO.out1_w1tc.val
| ^~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:432:31: note: in expansion of macro 'GPIO_CLR_REG'
432 | #define tft_Write_16(C) GPIO_CLR_REG = GPIO_OUT_CLR_MASK; GPIO_SET_REG = set_mask((uint8_t) ((C) >> 8)); WR_H;
| ^~~~~~~~~~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp:5251:19: note: in expansion of macro 'tft_Write_16'
5251 | else {tft_Write_16(textbgcolor);}
| ^~~~~~~~~~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:356:26: error: 'GPIO' was not declared in this scope
356 | #define GPIO_CLR_REG GPIO.out1_w1tc.val
| ^~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:432:31: note: in expansion of macro 'GPIO_CLR_REG'
432 | #define tft_Write_16(C) GPIO_CLR_REG = GPIO_OUT_CLR_MASK; GPIO_SET_REG = set_mask((uint8_t) ((C) >> 8)); WR_H;
| ^~~~~~~~~~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp:5256:18: note: in expansion of macro 'tft_Write_16'
5256 | if (pX) {tft_Write_16(textbgcolor);}
| ^~~~~~~~~~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:356:26: error: 'GPIO' was not declared in this scope
356 | #define GPIO_CLR_REG GPIO.out1_w1tc.val
| ^~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:432:31: note: in expansion of macro 'GPIO_CLR_REG'
432 | #define tft_Write_16(C) GPIO_CLR_REG = GPIO_OUT_CLR_MASK; GPIO_SET_REG = set_mask((uint8_t) ((C) >> 8)); WR_H;
| ^~~~~~~~~~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp:5305:30: note: in expansion of macro 'tft_Write_16'
5305 | while (tnp--) {tft_Write_16(textcolor);}
| ^~~~~~~~~~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:356:26: error: 'GPIO' was not declared in this scope
356 | #define GPIO_CLR_REG GPIO.out1_w1tc.val
| ^~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:432:31: note: in expansion of macro 'GPIO_CLR_REG'
432 | #define tft_Write_16(C) GPIO_CLR_REG = GPIO_OUT_CLR_MASK; GPIO_SET_REG = set_mask((uint8_t) ((C) >> 8)); WR_H;
| ^~~~~~~~~~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp:5307:19: note: in expansion of macro 'tft_Write_16'
5307 | else {tft_Write_16(textcolor);}
| ^~~~~~~~~~~~

exit status 1

Compilation error: exit status 1

I also tried the steps from this website ArduBadge and I also reduced the code to just this:

#include <TFT_eSPI.h>

void setup() {
}

void loop() {

}

I still get the same error:

In file included from c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\TFT_eSPI.h:96,
from c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp:16:
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.c: In function 'void dc_callback(spi_transaction_t*)':
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:203:22: error: 'GPIO' was not declared in this scope
203 | #define DC_D GPIO.out_w1ts = (1 << TFT_DC)//;GPIO.out_w1ts = (1 << TFT_DC)
| ^~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.c:783:28: note: in expansion of macro 'DC_D'
783 | if ((bool)spi_tx->user) {DC_D;}
| ^~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:202:22: error: 'GPIO' was not declared in this scope
202 | #define DC_C GPIO.out_w1tc = (1 << TFT_DC)//;GPIO.out_w1tc = (1 << TFT_DC)
| ^~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.c:784:9: note: in expansion of macro 'DC_C'
784 | else {DC_C;}
| ^~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp: In member function 'void TFT_eSPI::begin_tft_write()':
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:247:22: error: 'GPIO' was not declared in this scope
247 | #define CS_L GPIO.out_w1tc = (1 << TFT_CS); GPIO.out_w1tc = (1 << TFT_CS)
| ^~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp:80:5: note: in expansion of macro 'CS_L'
80 | CS_L;
| ^~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp: In member function 'virtual void TFT_eSPI::begin_nin_write()':
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:247:22: error: 'GPIO' was not declared in this scope
247 | #define CS_L GPIO.out_w1tc = (1 << TFT_CS); GPIO.out_w1tc = (1 << TFT_CS)
| ^~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp:92:5: note: in expansion of macro 'CS_L'
92 | CS_L;
| ^~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp: In member function 'void TFT_eSPI::end_tft_write()':
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:248:22: error: 'GPIO' was not declared in this scope
248 | #define CS_H GPIO.out_w1ts = (1 << TFT_CS)//;GPIO.out_w1ts = (1 << TFT_CS)
| ^~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp:106:7: note: in expansion of macro 'CS_H'
106 | CS_H;
| ^~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp: In member function 'virtual void TFT_eSPI::end_nin_write()':
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:248:22: error: 'GPIO' was not declared in this scope
248 | #define CS_H GPIO.out_w1ts = (1 << TFT_CS)//;GPIO.out_w1ts = (1 << TFT_CS)
| ^~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp:121:7: note: in expansion of macro 'CS_H'
121 | CS_H;
| ^~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp: In member function 'void TFT_eSPI::begin_tft_read()':
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:247:22: error: 'GPIO' was not declared in this scope
247 | #define CS_L GPIO.out_w1tc = (1 << TFT_CS); GPIO.out_w1tc = (1 << TFT_CS)
| ^~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp:141:5: note: in expansion of macro 'CS_L'
141 | CS_L;
| ^~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp: In member function 'void TFT_eSPI::end_tft_read()':
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:248:22: error: 'GPIO' was not declared in this scope
248 | #define CS_H GPIO.out_w1ts = (1 << TFT_CS)//;GPIO.out_w1ts = (1 << TFT_CS)
| ^~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp:161:7: note: in expansion of macro 'CS_H'
161 | CS_H;
| ^~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp: In member function 'void TFT_eSPI::writecommand(uint8_t)':
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:202:22: error: 'GPIO' was not declared in this scope
202 | #define DC_C GPIO.out_w1tc = (1 << TFT_DC)//;GPIO.out_w1tc = (1 << TFT_DC)
| ^~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp:964:3: note: in expansion of macro 'DC_C'
964 | DC_C;
| ^~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp: In member function 'void TFT_eSPI::writedata(uint8_t)':
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:203:22: error: 'GPIO' was not declared in this scope
203 | #define DC_D GPIO.out_w1ts = (1 << TFT_DC)//;GPIO.out_w1ts = (1 << TFT_DC)
| ^~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp:1012:3: note: in expansion of macro 'DC_D'
1012 | DC_D; // Play safe, but should already be in data mode
| ^~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp: In member function 'uint8_t TFT_eSPI::readcommand8(uint8_t, uint8_t)':
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:202:22: error: 'GPIO' was not declared in this scope
202 | #define DC_C GPIO.out_w1tc = (1 << TFT_DC)//;GPIO.out_w1tc = (1 << TFT_DC)
| ^~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp:1049:3: note: in expansion of macro 'DC_C'
1049 | DC_C; tft_Write_8(0xD9);
| ^~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp: In member function 'virtual uint16_t TFT_eSPI::readPixel(int32_t, int32_t)':
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:248:22: error: 'GPIO' was not declared in this scope
248 | #define CS_H GPIO.out_w1ts = (1 << TFT_CS)//;GPIO.out_w1ts = (1 << TFT_CS)
| ^~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp:1205:3: note: in expansion of macro 'CS_H'
1205 | CS_H;
| ^~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp: In member function 'void TFT_eSPI::readRectRGB(int32_t, int32_t, int32_t, int32_t, uint8_t*)':
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:248:22: error: 'GPIO' was not declared in this scope
248 | #define CS_H GPIO.out_w1ts = (1 << TFT_CS)//;GPIO.out_w1ts = (1 << TFT_CS)
| ^~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp:2209:3: note: in expansion of macro 'CS_H'
2209 | CS_H;
| ^~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp: In member function 'virtual void TFT_eSPI::setWindow(int32_t, int32_t, int32_t, int32_t)':
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:202:22: error: 'GPIO' was not declared in this scope
202 | #define DC_C GPIO.out_w1tc = (1 << TFT_DC)//;GPIO.out_w1tc = (1 << TFT_DC)
| ^~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp:3419:5: note: in expansion of macro 'DC_C'
3419 | DC_C; tft_Write_8(TFT_CASET);
| ^~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp: In member function 'void TFT_eSPI::readAddrWindow(int32_t, int32_t, int32_t, int32_t)':
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:202:22: error: 'GPIO' was not declared in this scope
202 | #define DC_C GPIO.out_w1tc = (1 << TFT_DC)//;GPIO.out_w1tc = (1 << TFT_DC)
| ^~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp:3495:3: note: in expansion of macro 'DC_C'
3495 | DC_C; tft_Write_8(TFT_CASET);
| ^~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp: In member function 'virtual void TFT_eSPI::drawPixel(int32_t, int32_t, uint32_t)':
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:202:22: error: 'GPIO' was not declared in this scope
202 | #define DC_C GPIO.out_w1tc = (1 << TFT_DC)//;GPIO.out_w1tc = (1 << TFT_DC)
| ^~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp:3677:7: note: in expansion of macro 'DC_C'
3677 | DC_C; tft_Write_8(TFT_CASET);
| ^~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:202:22: error: 'GPIO' was not declared in this scope
202 | #define DC_C GPIO.out_w1tc = (1 << TFT_DC)//;GPIO.out_w1tc = (1 << TFT_DC)
| ^~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp:3684:7: note: in expansion of macro 'DC_C'
3684 | DC_C; tft_Write_8(TFT_PASET);
| ^~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:202:22: error: 'GPIO' was not declared in this scope
202 | #define DC_C GPIO.out_w1tc = (1 << TFT_DC)//;GPIO.out_w1tc = (1 << TFT_DC)
| ^~~~
c:\Users\david\Documents\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp:3690:3: note: in expansion of macro 'DC_C'
3690 | DC_C; tft_Write_8(TFT_RAMWR);
| ^~~~

exit status 1

Compilation error: exit status 1```

I appreciate any ideas.

[lewisxhe]

Depending on the situation, there is a problem with your compilation environment. Please delete esp and reinstall it.

[Davidhndrsn70]

If you are referring to removing and reinstalling esp32 by Espressif. I just tried that again with the same results.

[lewisxhe]

Everything is normal here. It seems that the cause of the error is environmental problems. If you compile the examples that come with arduino esp32, such as WiFiScan, will it be normal?

Also, the example you are running is not provided by us. Are you sure it is normal?

[Davidhndrsn70]

This is the only example code that I have used and it has worked perfectly up until the other day when this all started. When I try code with for example :
#include <WiFi.h>
#include <WebServer.h>
#include <WebSocketsServer.h>
#include <ArduinoJson.h>

It works as soon as I add
#include <TFT_eSPI.h>

I get this loge error message..

[assadaria]

Please figure out a solution since I've been experiencing the same error in my Arduino IDE since yesterday. I'm thinking it might be related to updating some libraries, such as esp32 from Expressif.

[lewisxhe]

I updated to 3.0.0 alpha2 and did encounter compilation errors, but they were not the ones you encountered.

[lewisxhe]

I also encountered the same error. It seems that esp 3.0 is a major update, which makes many examples unusable. Please keep using versions below 3.0 and wait for the upstream library version to adapt before updating.

[github-actions]

This issue is stale because it has been open for 30 days with no activity.

[github-actions]

This issue was closed because it has been inactive for 14 days since being marked as stale.