otis v2

stereo "tape" delay/looper thing for norns

join the conversation at - https://llllllll.co/t/22149

---

there are three pages, mix, play, and edit. navigate with encoder 1. hold key 1 for ALT.

mix

• key 2 = mute L

• key 3 = mute R

• enc 2 = vol L

• enc 3 = vol R

• ALT + enc 2 = pan L

• ALT + enc 3 = pan R

play

• key 2 = flip L

• key 3 = flip R

• ALT + key 2 = skip L

• ALT + key 2 = skip R

• enc 2 = tape speed L

• enc 3 = tape speed R

• ALT + enc 2 = feedback L

• ALT + enc 3 = feedback R

nb: tape speed behavior by default is free; however, it can be quantized to octaves via the parameters menu. skip behavior by default is a loop reset; however, it can be configured to jump to random positions via the parameters menu.

edit

• key 2 = rec L on/off

• key 3 rec R on/off

• ALT + key 2 = clear buffer L

• ALT + key 3 = clear buffer R

• enc 2 = tape length L

• enc 3 = tape length R

• ALT + enc 2 = skip config

• ALT + enc 3 = speed config

nb: turning rec L/R off will hold the buffer, allowing use as a looper.

---

grid

L/R loops are laid out identically:

touch a key inside the "loop posistion" area to jump to that point in the loop.

to "patch" an lfo:

• hold an lfo on button
• touch a control

while holding an lfo on button you can edit lfo parameters with the norns encoders and keys:

• enc 1: lfo speed/frequency

• enc 2: lfo depth

• enc 3: lfo offset

• key 2/3: set lfo shape

holding the grid alt button and pressing in the lfo section will "un-patch" the lfo.

holding the grid alt button and touching any speed button will return speed to 1.

holding the grid alt button and turning enc 2/3 will "slide" your L/R loops around the buffer.