OpenWrt-v24.10.0-rc5-[ZyXEL-NBG7815-160mhz]-20250108 nbg7815-24.10.0-rc5 r28304+14-6dacba30a7-12bcbfbc249e

UNTESTED BUILD

DISCLAIMER: Your warranty is now void. I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the internet or wifi failed. Please do some research if you have any concerns about features included in this build before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.

Zyxel Armor G5 (nbg7815) Openwrt build with LEDs and FAN support.

LEDs and fan support was initial developed by @itorK and @ddimension. LEDs support has been recently modify by @Ansuel.

Tweeks on Fan was also made by @pwned-pixel and me.

Thanks a lot all of you and all others openwrt developers for your works.

---

nbg7815-24.10.0-rc5-What's new:

-rebase to openwrt-24.10.0-rc5
-Kernel 6.6.69

---

nbg7815-24.10.0-rc2-What's new:

-rebase to openwrt-24.10.0-rc2
-Kernel 6.6.63

---

24.10.v0-What's new:

-160mhz support. Now you have only one 5Ghz radio but with 160mhz 8x8 support like de original factory firmware.
-Kernel 6.6.60
-ath11k-2.9.0.1-02146
-new LEDs drivers.
-vnstat2 
-nlbwmon is included again
-usteer is included again
-LEDs go dark blue if wan interface is up has been removed. You can ease do some thing similar through LuCI LED configuration's page.

 And off course, all modification openwrt-24.10 has done from my last build.

  Do not work:

  -What doesn't work in the openwrt-24.10 version

  -To avoid problems with the WLAN network, it is necessary to check multicast
   to unicast in the advanced settings of the WLANs interface configurations.

   ....and many more things that I still don't know what and where they are!!!

Build includes:
6in4 and 6to4
ACME scripts with DNS support
adblock
blockd
DDNS with no-ip script included
Files system included: ext4, fat, fat32, ntfs, exFat
hd-idle
Luci statistics
MAP Package (MAP-T / MAP-E) for 4in6 support
Network utilities: iperf, iperf3, netperf, itrr
OpenSSH SFTP Server
OpenVPN Easy RSA
Samba4 file sharing server
Tailscale / Tailscaled
Wake on Lan
wifi schedule
uPnP
WireGuard
vnstat2
nlbwmon
usteer
............
And some more little stuff I can not remember now
*PS: I know there are many package on this release but you can always uninstall the ones you don't want.

---

What's new on: 240324

- It is not needed to reboot or wifi up after firstboot---DID NOT WORK---
- Some modification to LEDs driver made by ItorK
- Now LEDs go dark blue if wan interface is up and blinking green if it is down. Also they will go red while flashing. (Thanks KONG)
- Basic script to make more easy to control hardcoded patterns LEDs. There are 22 hardcoded patterns on driver that can be used. "leds-on 1 1"  "leds-on 21 5" "leds-on 5 15"; LEDs can be off if "leds-on 0 0". You can also control LEDs through luci. In this case LEDs will be always white (light blue) Use q1 and q2 channels. Don't use mmc0::.
- Last official release ath11k 01977 firmware. This time the last release firmware seems to be working well.  
- And all existing improvements in the current snapshot version compared to the previous one

- Build includes same packages than previous versions:
    6in4, 6rd and 6to4
    ACME scripts with DNS support
    adblock
    blockd
    DDNS with no-ip script included
    Files system included: ext4, fat, fat32, ntfs, exFat
    hd-idle
    Luci statistics
    MAP Package (MAP-T / MAP-E) for 4in6 support
    Network utilities: iperf, iperf3, netperf, itrr
    OpenSSH SFTP Server
    OpenVPN Easy RSA
    Samba4 file sharing server
    Tailscale / Tailscaled
    Wake on Land
    wifi schedule
    uPnP
    WireGuard
    ............
    And some more little stuff I can not remember now

openwrt-v24.10.0-rc2-[zyxel-nbg7815-160mhz]-20241205-r28161+12-ea17e958b9+5013a666dd56

UNTESTED BUILD

DISCLAIMER: Your warranty is now void. I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the internet or wifi failed. Please do some research if you have any concerns about features included in this build before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.

Zyxel Armor G5 (nbg7815) Openwrt build with LEDs and FAN support.

LEDs and fan support was initial developed by @itorK and @ddimension. LEDs support has been recently modify by @Ansuel.

Tweeks on Fan was also made by @pwned-pixel and me.

Thanks a lot all of you and all others openwrt developers for your works.

---

nbg7815-24.10.0-rc2-What's new:

-rebase to openwrt-24.10.0-rc2
-Kernel 6.6.63

---

24.10.v0-What's new:

-160mhz support. Now you have only one 5Ghz radio but with 160mhz 8x8 support like de original factory firmware.
-Kernel 6.6.60
-ath11k-2.9.0.1-02146
-new LEDs drivers.
-vnstat2 
-nlbwmon is included again
-usteer is included again
-LEDs go dark blue if wan interface is up has been removed. You can ease do some thing similar through LuCI LED configuration's page.

 And off course, all modification openwrt-24.10 has done from my last build.

  Do not work:

  -What doesn't work in the openwrt-24.10 version

  -To avoid problems with the WLAN network, it is necessary to check multicast
   to unicast in the advanced settings of the WLANs interface configurations.

   ....and many more things that I still don't know what and where they are!!!

Build includes:
6in4 and 6to4
ACME scripts with DNS support
adblock
blockd
DDNS with no-ip script included
Files system included: ext4, fat, fat32, ntfs, exFat
hd-idle
Luci statistics
MAP Package (MAP-T / MAP-E) for 4in6 support
Network utilities: iperf, iperf3, netperf, itrr
OpenSSH SFTP Server
OpenVPN Easy RSA
Samba4 file sharing server
Tailscale / Tailscaled
Wake on Lan
wifi schedule
uPnP
WireGuard
vnstat2
nlbwmon
usteer
............
And some more little stuff I can not remember now
*PS: I know there are many package on this release but you can always uninstall the ones you don't want.

---

What's new on: 240324

- It is not needed to reboot or wifi up after firstboot---DID NOT WORK---
- Some modification to LEDs driver made by ItorK
- Now LEDs go dark blue if wan interface is up and blinking green if it is down. Also they will go red while flashing. (Thanks KONG)
- Basic script to make more easy to control hardcoded patterns LEDs. There are 22 hardcoded patterns on driver that can be used. "leds-on 1 1"  "leds-on 21 5" "leds-on 5 15"; LEDs can be off if "leds-on 0 0". You can also control LEDs through luci. In this case LEDs will be always white (light blue) Use q1 and q2 channels. Don't use mmc0::.
- Last official release ath11k 01977 firmware. This time the last release firmware seems to be working well.  
- And all existing improvements in the current snapshot version compared to the previous one

- Build includes same packages than previous versions:
    6in4, 6rd and 6to4
    ACME scripts with DNS support
    adblock
    blockd
    DDNS with no-ip script included
    Files system included: ext4, fat, fat32, ntfs, exFat
    hd-idle
    Luci statistics
    MAP Package (MAP-T / MAP-E) for 4in6 support
    Network utilities: iperf, iperf3, netperf, itrr
    OpenSSH SFTP Server
    OpenVPN Easy RSA
    Samba4 file sharing server
    Tailscale / Tailscaled
    Wake on Land
    wifi schedule
    uPnP
    WireGuard
    ............
    And some more little stuff I can not remember now

openwrt-v24.10-[zyxel-nbg7815-160mhz]-20241121-r28032+13-1abaf051d2-994c1173ebbb

UNTESTED BUILD

DISCLAIMER: Your warranty is now void. I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the internet or wifi failed. Please do some research if you have any concerns about features included in this build before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.

Zyxel Armor G5 (nbg7815) Openwrt build with LEDs and FAN support.

LEDs and fan support was initial developed by @itorK and @ddimension. LEDs support has been recently modify by @Ansuel.

Tweeks on Fan was also made by @pwned-pixel and me.

Thanks a lot all of you and all others openwrt developers for your works.

---

24.10.v0-What's new:

-160mhz support. Now you have only one 5Ghz radio but with 160mhz 8x8 support like de original factory firmware.
-Kernel 6.6.60
-ath11k-2.9.0.1-02146
-new LEDs drivers.
-vnstat2 
-nlbwmon is included again
-usteer is included again
-LEDs go dark blue if wan interface is up has been removed. You can ease do some thing similar through LuCI LED configuration's page.

 And off course, all modification openwrt-24.10 has done from my last build.

  Do not work:

  -What doesn't work in the openwrt-24.10 version

  -To avoid problems with the WLAN network, it is necessary to check multicast
   to unicast in the advanced settings of the WLANs interface configurations.

   ....and many more things that I still don't know what and where they are!!!

Build includes:
6in4 and 6to4
ACME scripts with DNS support
adblock
blockd
DDNS with no-ip script included
Files system included: ext4, fat, fat32, ntfs, exFat
hd-idle
Luci statistics
MAP Package (MAP-T / MAP-E) for 4in6 support
Network utilities: iperf, iperf3, netperf, itrr
OpenSSH SFTP Server
OpenVPN Easy RSA
Samba4 file sharing server
Tailscale / Tailscaled
Wake on Lan
wifi schedule
uPnP
WireGuard
vnstat2
nlbwmon
usteer
............
And some more little stuff I can not remember now
*PS: I know there are many package on this release but you can always uninstall the ones you don't want.

---

What's new on: 240324

- It is not needed to reboot or wifi up after firstboot---DID NOT WORK---
- Some modification to LEDs driver made by ItorK
- Now LEDs go dark blue if wan interface is up and blinking green if it is down. Also they will go red while flashing. (Thanks KONG)
- Basic script to make more easy to control hardcoded patterns LEDs. There are 22 hardcoded patterns on driver that can be used. "leds-on 1 1"  "leds-on 21 5" "leds-on 5 15"; LEDs can be off if "leds-on 0 0". You can also control LEDs through luci. In this case LEDs will be always white (light blue) Use q1 and q2 channels. Don't use mmc0::.
- Last official release ath11k 01977 firmware. This time the last release firmware seems to be working well.  
- And all existing improvements in the current snapshot version compared to the previous one

- Build includes same packages than previous versions:
    6in4, 6rd and 6to4
    ACME scripts with DNS support
    adblock
    blockd
    DDNS with no-ip script included
    Files system included: ext4, fat, fat32, ntfs, exFat
    hd-idle
    Luci statistics
    MAP Package (MAP-T / MAP-E) for 4in6 support
    Network utilities: iperf, iperf3, netperf, itrr
    OpenSSH SFTP Server
    OpenVPN Easy RSA
    Samba4 file sharing server
    Tailscale / Tailscaled
    Wake on Land
    wifi schedule
    uPnP
    WireGuard
    ............
    And some more little stuff I can not remember now

OpenWRT-nbg7815-r25985+15-680f8738d0 - sysupgrade Pre-release

OpenWRT snapshot 25985+15-680f8738d0 firmware plus 14 commits for basic LED and FAN support for Zyxel ArmorG5 AKA NBG7815

DISCLAIMER: Your warranty is now void. I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the internet or wifi failed. Please do some research if you have any concerns about features included in this build before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.

Zyxel Armor G5 (nbg7815) Openwrt build with commits for LED and FAN control. The led and fan support was developed by @itorK and @ddimension. There is also pwned fine tune work for fan support and other little thing form @ricsc. Finally there is no need to reboot or wifi up after first boot thanks to @ddimension .

Thank you very much to all of you for your work.

What's new on: 240422
-Kernel 6.6. Kernel 6.1 has already been abandoned for qualcommax devices, so let's see how this kernel works with the nbg7815

-Finally openwrt main branch has resolved the wifi problem after sysupgrade when blockd package is include. The implementation that was included in the previous prerelease did not work.

-Update fan to be enable by default. If you do want a permanent fan off you can put a very high temp (100ºC) on fan control option (uci set fanctld.config.Temp=100000 ; uci commit fanctld ; service fanctld restart)

-This device has the problem that every time it restarts it modifies the BSSIDs of the defined SSIDs. Several solutions have been implemented to solve this problem but all of them conflict with the inclusion of support for file sharing until now...
In this build I have implemented one of the various solutions mentioned, and for it work.

-Usteer is back to packages included, now with a luci configuration page.

*PS: I know there are many package on this release but you can always uninstall those you don't want.

Still do not work:
What doesn't work in the OpenWrt snapshot 25985-680f8738d0 version
160mhz
radio2 only works on channels 38-64
....and many more things that I still don't know what and where they are!!!

---

What's new on: 240324

• It is not needed to reboot or wifi up after firstboot---DID NOT WORK---

• Some modification to LEDs driver made by ItorK

• Now LEDs go dark blue if wan interface is up and blinking green if it is down. Also they will go red while flashing. (Thanks KONG)

• Basic script to make more easy to control hardcoded patterns LEDs. There are 22 hardcoded patterns on driver that can be used. "leds-on 1 1" "leds-on 21 5" "leds-on 5 15"; LEDs can be off if "leds-on 0 0". You can also control LEDs through luci. In this case LEDs will be always white (light blue) Use q1 and q2 channels. Don't use mmc0::.

• Last official release ath11k 01977 firmware. This time the last release firmware seems to be working well.

• And all existing improvements in the current snapshot version compared to the previous one

• Build includes same packages than previous versions:
  6in4, 6rd and 6to4
  ACME scripts with DNS support
  adblock
  blockd
  DDNS with no-ip script included
  Files system included: ext4, fat, fat32, ntfs, exFat
  hd-idle
  Luci statistics
  MAP Package (MAP-T / MAP-E) for 4in6 support
  Network utilities: iperf, iperf3, netperf, itrr
  OpenSSH SFTP Server
  OpenVPN Easy RSA
  Samba4 file sharing server
  Tailscale / Tailscaled
  Wake on Land
  wifi schedule
  uPnP
  WireGuard
  ............
  And some more little stuff I can not remember now

OpenWRT-nbg7815-r25660+11-c02a2db05e - sysupgrade Pre-release

OpenWRT snapshot r25660-c02a2db05e firmware plus 11 commits for basic LED and FAN support for Zyxel ArmorG5 AKA NBG7815

DISCLAIMER: Your warranty is now void. I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the internet or wifi failed. Please do some research if you have any concerns about features included in this build before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.

Zyxel Armor G5 (nbg7815) Openwrt build with commits for LED and FAN control. The led and fan support was developed by itorK and avalentin. There is also pwned fine tune work for fan support and other little thing form KONG. Finally there is no need to reboot or wifi up after first boot thanks to avalentin .

Thank you very much to all of you for your work.

what's new on:240324

• It is not needed to reboot or wifi up after firstboot

• Some modification to LEDs driver made by ItorK

• Now LEDs go dark blue if wan interface is up and blinking green if it is down. Also they will go red while flashing. (Thanks KONG)

• Basic script to make more easy to control hardcoded patterns LEDs. There are 22 hardcoded patterns on driver that can be used. "leds-on 1 1" "leds-on 21 5" "leds-on 5 15"; LEDs can be off if "leds-on 0 0". You can also control LEDs through luci. In this case LEDs will be always white (light blue) Use q1 and q2 channels. Don't use mmc0::.

• Last official release ath11k 01977 firmware. This time the last release firmware seems to be working well.

• And all existing improvements in the current snapshot version compared to the previous one

• Build includes same packages than previous versions:
  6in4, 6rd and 6to4
  ACME scripts with DNS support
  adblock
  blockd
  DDNS with no-ip script included
  Files system included: ext4, fat, fat32, ntfs, exFat
  hd-idle
  Luci statistics
  MAP Package (MAP-T / MAP-E) for 4in6 support
  Network utilities: iperf, iperf3, netperf, itrr
  OpenSSH SFTP Server
  OpenVPN Easy RSA
  Samba4 file sharing server
  Tailscale / Tailscaled
  Wake on Land
  wifi schedule
  uPnP
  WireGuard
  ............
  And some more little stuff I can not remember now

*PS: I know there are many package on this release but you can always uninstall those you don't want.

• Still do not work:
  What doesn't work in the OpenWrt snapshot r25660-c02a2db05e version
  160mhz
  radio2 only works on channels 38-64
  ....and many more things that I still don't know what and where they are!!!

OpenWRT - v23.05.2-nbg7815

OpenWRT v23.05.2 firmware with basic LED and FAN support for Zyxel ArmorG5 AKA NBG7815

IF YOU ARE UPDATING YOUR SYSTEM KEEPING CONFIG, AFTER THE INITIAL REBOOT YOU WILL NOT HAVE WIFI. YOU NEEDS TO WAIT 3 MIN SINCE FLASH BEGIN. THEN YOU HAVE THREE OPTIONS:

1. - SSH THROUGH CABLE AND DO "WIFI UP" OR
2. - RESTART EVERY RADIO THROUGH LUCI WEB PAGE, OR
3. - REBOOT THE DEVICE.

THE SYSTEM WILL BE FULLY OPERATIONAL AFTER DO ONE OF THE OPTIONS.

The problem described above is also present in official openwrt v23.05.2 firmware if package blockd is included in the build.

DISCLAIMER: Your warranty is now void. I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the internet or wifi failed. Please do some research if you have any concerns about features included in this build before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.

Zyxel Armor G5 (nbg7815) Openwrt build with commits for LED and FAN control. The led and fan support was developed by itorK and avalentin. There is also pwned fine tune work for fan support. Thanks a lot all of you for your works.

• Build includes:
  6in4, 6rd and 6to4
  ACME scripts with DNS support
  adblock
  blockd
  DDNS with no-ip script included
  Files system included: ext4, fat, fat32, ntfs, exFat
  hd-idle
  Luci statistics
  MAP Package (MAP-T / MAP-E) for 4in6 support
  Network utilities: iperf, iperf3, netperf, itrr
  OpenSSH SFTP Server
  OpenVPN Easy RSA
  Samba4 file sharing server
  Tailscale / Tailscaled
  Wake on Land
  wifi schedule
  uPnP
  WireGuard
  ............
  And some more little stuff I can not remember now

*PD: I know there are many package on this release but you can always uninstall the ones you don't want.

• Still do not work:
  What doesn't work in the OpenWrt v23.05.2 version
  160mhz
  radio2 only works on channels 38-64
  ....and many more things that I still don't know what and where they are!!!