frehsly installed v22 beta 2 www panel not accessible

[lublak]

Now its just working without changing a think ... oh man xD and no again: it doesn't work ... on and off!

After i planned my hardware i first think test with a smaller setup (rpi and capture card).

I downloaded 2026-04-21-raspios-trixie-P010-hdr-arm64-lite.img.xz and loaded it via rpi imager (working on linux)

It shows up at my fritzbox so the wifi config works:

Also ssh works fine, and all services are running:

Accessing http://hyperhdr:8090/ or https://hyperhdr:8092/

[awawa-dev]

Did you ssh to Pi using hyperhdr as in the browser or using IP? Try http 8091 or check in RPi SSH cli (ex. netstat/ss) HyperHDR active ports.

[lublak]

i found out: it sometimes work and sometimes not, now it works fine over ip.
On errors appears in the console:

(not connected to any tv)

the other error is (i think) not that important:

[awawa-dev]

"Frame too small" is typical error when initializing the USB grabber capturing on Linux - it should go away when the first frame is successfully captured.

[lublak]

okay okay :) thanks! it looks nice. Now i need to recheck my hardware picking list for 12V (most documentations on websites etc are only for 5V).

[lublak]

@awawa-dev i still have the same issue with this image, it works because i run it manually.
Now the next day i have some more time

.....
Jul 10 19:30:46 hyperhdr (hyperhdr)[1125]: hyperhdr@pi.service: Failed to determine user credentials: No such process
Jul 10 19:30:46 hyperhdr (hyperhdr)[1125]: hyperhdr@pi.service: Failed at step USER spawning /usr/bin/hyperhdr: No such process
Jul 10 19:30:46 hyperhdr systemd[1]: hyperhdr@pi.service: Main process exited, code=exited, status=217/USER
Jul 10 19:30:46 hyperhdr systemd[1]: hyperhdr@pi.service: Failed with result 'exit-code'.
Jul 10 19:30:48 hyperhdr systemd[1]: hyperhdr@pi.service: Scheduled restart job, restart counter is at 9.
Jul 10 19:30:48 hyperhdr systemd[1]: Started hyperhdr@pi.service - HyperHdr ambient light systemd service  for user pi.
Jul 10 19:30:48 hyperhdr (hyperhdr)[1126]: hyperhdr@pi.service: Failed to determine user credentials: No such process
Jul 10 19:30:48 hyperhdr (hyperhdr)[1126]: hyperhdr@pi.service: Failed at step USER spawning /usr/bin/hyperhdr: No such process
Jul 10 19:30:48 hyperhdr systemd[1]: hyperhdr@pi.service: Main process exited, code=exited, status=217/USER
Jul 10 19:30:48 hyperhdr systemd[1]: hyperhdr@pi.service: Failed with result 'exit-code'.
Jul 10 19:30:50 hyperhdr systemd[1]: hyperhdr@pi.service: Scheduled restart job, restart counter is at 10.
Jul 10 19:30:50 hyperhdr systemd[1]: Started hyperhdr@pi.service - HyperHdr ambient light systemd service  for user pi.
Jul 10 19:30:50 hyperhdr (hyperhdr)[1127]: hyperhdr@pi.service: Failed to determine user credentials: No such process
Jul 10 19:30:50 hyperhdr (hyperhdr)[1127]: hyperhdr@pi.service: Failed at step USER spawning /usr/bin/hyperhdr: No such process
Jul 10 19:30:50 hyperhdr systemd[1]: hyperhdr@pi.service: Main process exited, code=exited, status=217/USER
Jul 10 19:30:50 hyperhdr systemd[1]: hyperhdr@pi.service: Failed with result 'exit-code'.
Jul 10 19:30:52 hyperhdr systemd[1]: hyperhdr@pi.service: Scheduled restart job, restart counter is at 11.
Jul 10 19:30:52 hyperhdr systemd[1]: Started hyperhdr@pi.service - HyperHdr ambient light systemd service  for user pi.

[lublak]

i think the issue comes from the Pi Imager i try another method to flash the sd card

[awawa-dev]

Yes, Raspberry Pi Imager is not recommended. Please check HyperHDR Wiki manual how to flash SD image.