H2D 0.2 Nozzle currently uses 0.4 Nozzle's layer height limits

[illien3]

Bambu Studio Version

2.0.2.57

Where is the application from?

Bambu Lab Official website

OS version

macOS 15.3.1

Additional system information

No response

Printer

Bambu Lab H2D

How to reproduce

Go to 'Prepare'
Go to 'Printer settings' with H2D active
Select 'Bambu Lab H2D 0.2 Nozzle'
Go to 'Left Extruder' or 'Right Extruder'
Under section 'Layer height limits'

Actual results

0.2mm nozzle has a max layer height limits of 0.28mm, min of 0.08mm.
Which is the same as the 0.4mm nozzle

H2D 0.2 Nozzle:

H2D 0.4 Nozzle:

As a result, 0.06mm layer height presets are also missing for BBL H2D 0.2:

vs BBL A1 0.2 presets:

Expected results

As I understand, 0.2mm nozzle's min/max layer height should be 0.04 / 0.14 mm, which was the value used on BBL A1, P1, X1 series:

Project file & Debug log uploads

N/A

Checklist of files to include

• Log file
• Project file

[XunZhangBambu]

@illien3 thanks, we will correct the layer height limits in next version

[XunZhangBambu]

@illien3 Hi, this has been fixed in our latest version 02.01.00.59

[karine-johanne]

Hi, i own a H2S and am having the same issue on Mac. Bambu studio version is 2.5.0.66
Please note that i haven’t connected the 0.2 nozzle yet.
Can the profiles be downloaded ?
Thank you

[thedreamcreative]

It's 2026 and I have the same issue with my newly bought H2C. I'd love to print some minis on it with a 0.06mm layer height

[karine-johanne]

I forced the values to 0.04 myself. They were accepted and it printed. I’m not sure it printed to 0.04 actually, the maximum recommended it 0.05 anyway i think.
Anyway, anything other than pla doesn’t print as well on the H2 at high resolutions. Neither ABS not PETG were anywhere near as sharp.

[thedreamcreative]

I forced the values to 0.04 myself. They were accepted and it printed. I’m not sure it printed to 0.04 actually, the maximum recommended it 0.05 anyway i think. Anyway, anything other than pla doesn’t print as well on the H2 at high resolutions. Neither ABS not PETG were anywhere near as sharp.

Not knowing whether it printed at 0.04 or not is pretty messed up for such an expensive piece of equipment!

[karine-johanne]

I forced the values to 0.04 myself. They were accepted and it printed. I’m not sure it printed to 0.04 actually, the maximum recommended it 0.05 anyway i think. Anyway, anything other than pla doesn’t print as well on the H2 at high resolutions. Neither ABS not PETG were anywhere near as sharp.

Not knowing whether it printed at 0.04 or not is pretty messed up for such an expensive piece of equipment!

I mean i can’t confirm it visually on a benchy, but it sure took twice as much time as with the 0.08 0.2 nozzle profile.