Skip to content

Automation Examples

barneyonline edited this page Nov 9, 2026 · 7 revisions
HomePod Sensor Link — Automation Examples

Automation examples

Choose the entities you want to monitor in Home Assistant’s automation editor.

Alert when checks stop

No blueprint is required from v0.2.0. The integration checks for stalled monitoring every five minutes using a timer separate from the sensor checks. A HomePod with no completed check for fifteen minutes produces a HomePod Sensor Link monitoring has stalled Repairs issue and persistent notification. Both clear when checks resume.

Each monitored device gets a fresh fifteen-minute grace period when monitoring starts or resumes. Paused or blocked devices and devices awaiting credentials are excluded. Monitoring is suspended while Home Assistant is starting or stopping, while the integration is unloaded, or while another recovery engine conflicts with it.

A completed check refreshes the heartbeat even if sensor access failed. Use diagnostic last_completed to check progress and the diagnostic status to investigate access failures. last_checked marks the start of an attempt and cannot prove it finished. An unchanged temperature can still come from a completed fresh check.

The alert only reports stalled monitoring; pairing recovery remains separate. See using the integration.

If you installed the old heartbeat blueprint, it is no longer distributed or updated. After updating to v0.2.0 or later, you can disable its automation to avoid duplicate alerts, then delete that automation and its local blueprint if no longer needed.

Alert when a measurement is unavailable

In the automation editor, add a state trigger, select a temperature or humidity entity, set the destination state to unavailable, and set a duration of fifteen minutes. Add your preferred notification action. Use a separate recovery notification if you want to be told when a numeric state returns.

The built-in monitoring alert detects stalled checks. Measurement-unavailable alerts can also report access failures or stale samples while checks are still completing.

Clone this wiki locally