Increase Ampere Sense Limit

[jasc76]

Hello

The new configurator warns about the max voltage of 25.5 and an Ampere limit of 63.5
There are these two pull requests:
betaflight/betaflight-configurator#2144
#10025

I noticed even before on my bigger builds with Tekko32 4in1 Metal with 65A per Channel that the Ampere Meter is capped. Of course for some time now 4in1 dont have individual shunt's anymore and rely on one shunt with the ADC current pin to report the amperes used and notby blheli telemetry.

Is there any way to enable at least 4*65A = 260A measuring capability ?

[haslinghuis]

Not at the moment. The PR above was trying but didn't finish. As this is an open source project please feel free to contribute a working solution which is acceptable.

[github-actions]

@jasc76: This issue is being automatically closed because it does not follow the template.

When you open an issue or feature request you are presented with a template. Follow the guidelines.

You can edit your message to fix this and the issue will be automatically reopened.

[etracer65]

It's just a display limit in the configurator only. They are not limited in Betaflight or in the OSD display. So this is only a problem if you're flying while connected to the configurator and looking at the battery tab - apparently with a really long USB cable. So in other words, don't worry about it as it's not a problem.

[jasc76]

Ok, thx
but it seems in BB logs there is a cap... So there is also no cap there?

[etracer65]

Blackbox can record a maximum of 327.67A