Display Remaining Filament Percentage for Bambu Lab Spools in AMS Section

[liftbag]

Description

One of the data points I frequently use in the Bambu Lab integration for Home Assistant is the remaining filament percentage for each spool inside the AMS units.

Since Bambu Lab spools are typically 1 kg, this percentage provides an immediate and practical indication of whether there’s enough filament left to complete a print.

Unfortunately, this numerical value is currently visible only in Home Assistant.
However, since this information is already transmitted via MQTT from the printer, it should be technically possible to display it in the Panda Touch interface as well.

Feature Request

Please consider adding a graphical display of the remaining filament percentage directly in the Panda Touch UI, ideally as an overlay on the spool representation within the Filament section.

This would:

• Provide a quick overview of spool status at a glance
• Eliminate the need to cross-check in Home Assistant
• Improve overall user experience

Example Reference

Below are some example screenshots showing how this data currently appears in Home Assistant interfaces:

Concept Visualization (Mockup)

To better illustrate the idea, here’s a mockup of the Panda Touch GUI showing how the filament percentage could be displayed as an overlay on each spool:
(This is just a conceptual example for visualization purposes.)

Additional Notes

This feature would be a small but very practical addition for users who rely on Panda Touch to monitor their printer setup.
Thank you for considering this enhancement!

[xixi866]

This issue has been evaluated and included in our future update plan. Thank you for your suggestion; we will inform you of the firmware version once the feature is released.

[Lyle-68]

@liftbag Thank you for the great suggestion. In the current version, the spool graphic on the AMS page already changes dynamically according to the remaining filament percentage reported by the printer. However, the remaining amount is currently represented only by the fill level of the spool graphic, without displaying a specific numerical value.

As I understand it, you would like the exact remaining percentage, such as 65%, to be displayed directly on each spool graphic. This would make it easier to see the remaining filament amount without having to estimate it from the graphic. Is my understanding correct?

If so, I will include this feature in a future optimization. I look forward to your reply.