Repository navigation
Releases: carlito12345/DiPlay
Release list
DiPlay v0.2.16
DiPlay 0.2.16 更新说明
- 同步新版界面、仪表投屏、音视频播放和麦克风兼容性改进。
- 合入已经在 KX11 验证可用的原厂热点连接修复。
- 优化语音与音乐协同:独立语音播放期间暂停音乐,结束后恢复;手动操作后不再自动恢复。
- 优化方控重复事件处理,并扩展 FX11 系列的车桥兼容。
- 保留吉利车标、导航与媒体输出设置、车辆扫描、云端报告和投屏编辑器。
支持 Android 7.1 及以上;车辆功能需另装 Android 9 及以上版本的车桥。
DiPlay v0.2.15
DiPlay 0.2.15
- 增加明亮、深色与自动外观,改进小窗口布局和全屏显示。
- 改善音乐播放、USB 连接与蓝牙重连,提升语音输入兼容性。
- 增加 Wi-Fi Direct 自动频段选择,以及选定 iPhone 重新连接蓝牙时打开应用的选项。
- 增加关于页面的检查更新入口。
- 保留吉利车标、方控测试、车辆属性扫描、投屏编辑器和导航、媒体音频设置。
基础应用支持 Android 7.1 及以上;GD 车桥支持 Android 9 及以上。
DiPlay v0.2.14
DiPlay 0.2.14
- CarPlay 中的车辆按钮默认改用吉利车标和“吉利”名称,已有自定义图片及其他名称继续保留;更改在下次连接后生效。
- 恢复无线连接流程,默认使用系统或车机自带热点;修正旧“自动”设置引起的连接方式不一致,保留手动选择 Wi-Fi Direct。
- 更新 USB、热点和蓝牙连接流程,改善连接中断处理。
- 声音设置精简为导航、媒体两组。导航独立输出,通话、语音助手、铃声、微信及音乐统一使用媒体通道,保留数值调节和设备选择。
- 新增“原厂输出 / 蓝牙输出”。蓝牙输出保留车机蓝牙音乐,播放时自动避免重复音乐;导航、通话和语音继续正常播放。无法确认蓝牙播放时,保留 CarPlay 声音。
- 车辆属性支持一键扫描、分析、提取、应用和保存,保留已有单位及校准配置。
- 扫描报告直接保存到“下载/DiPlay”,无需文件保存或分享工具;Android 9 首次使用需要存储权限。
- 扫描报告与运行日志分别保存和上传,新增车型、车机硬件、系统、应用及车辆数据桥版本信息。
- 扫描报告自动上传云端,支持最高 10 MB;断网后自动重试,也可手动重新上传,结果页显示上传状态。
- “隐藏顶部状态栏”和底部导航栏设置覆盖主页、设置、扫描与 CarPlay 页面。
- 改进方控接入与按键接管,减少切歌时原生音乐同时响应;请同时更新车辆数据桥至 0.11.24。
- 设置列表直接提供“方控测试”和“车辅属性扫描”。
- 保留导航优先的投屏编辑器、车辆数据、完整地图投屏、三指切换,以及音量按键或旋钮缩放。
最低支持 Android 9。连接、声音和车辆显示效果仍需实际车型确认。
DiPlay v0.2.13.2
DiPlay 0.2.13.2
-
改善吉利部分车型热点、蓝牙已连接但无法进入 CarPlay 的问题,兼容车机的多条局域网通道。
-
手动热点使用已保存的名称和密码,避免其他热点配置覆盖;改进无线服务发现与重连。
-
车辆扫描报告直接保存,不再依赖分享应用;导出后显示文件名,云端上传状态显示在扫描结果旁。
-
车辆属性支持一键扫描、分析、提取、应用和保存,保留已有单位及校准配置。
-
扫描报告自动保存到“下载/DiPlay”,无需文件保存工具;Android 9 首次使用需要存储权限。
-
扫描报告自动上传云端,支持最高 10 MB,断网后自动重试,也可手动重新上传。
-
车辆扫描页增加使用教程、已应用项目数和云端上传状态。
-
改进隐藏状态栏与底部导航栏的兼容性,主页、车辆扫描和 CarPlay 页面遵循同一显示设置。
-
调整无线、USB、热点和蓝牙连接流程,采用此前车型反馈稳定的连接方案。
-
“隐藏顶部状态栏”也可用于 DiPlay 主页和设置页面,切换后立即生效,返回应用时保留选择。
-
改进方控接入与按键接管状态,减少切歌时原生音乐同时响应的问题;请同时更新车辆数据桥至 0.11.24。
-
设置列表新增“方控测试”和“车辅属性扫描”入口,无需解锁即可使用。
-
保留 0.2.13.1 的蓝牙音频协同、独立声音及麦克风选择、导航优先的投屏编辑器、车辆数据、完整地图投屏、三指切换和音量按键或旋钮缩放功能。
最低支持 Android 9。音频路由、方控及仪表投屏效果取决于车型和车机固件;本版仍需实际车辆确认。
DiPlay v0.2.13.1
DiPlay 0.2.13.1
- 改善 CarPlay 与车机蓝牙音乐的切换,降低同时播放的情况;结束后尝试恢复原有音乐连接。
- 导航提示会压低媒体音量,通话和语音助手优先;改善切换后的声音恢复。
- 媒体、导航、通话、语音助手及铃声可分别选择输出设备,通话和语音助手可分别选择麦克风,保留设备数值输入。
- 音频设备断开时回退到系统通道,重新连接后重新应用已保存的设备选择。
- 增加完整导航地图投屏、地图区域调整及音量按键或旋钮缩放,适用于支持相应屏幕和按键接入的车型。
- 支持三指切换地图投屏,改善不同屏幕尺寸和分辨率的显示适配。
- 兼容车桥可在地图实际显示后切换原车仪表导航模式,结束后恢复原模式。
最低支持 Android 9。蓝牙切换、音频设备和仪表投屏效果取决于车机固件;本版仍需在实际车辆上确认。
配套车桥
GD 车桥 0.11.23 支持车辆数据与方向盘按键接入。请先安装车桥,再安装 DiPlay;两者均要求 Android 9 及以上。实际支持情况取决于车机接口与权限。
DiPlay v0.2.13
DiPlay 0.2.13
- 合并上游 0.2.13 更新,改善无线连接发现、等待画面的昼夜显示,并增加繁体中文支持。
- 改善星越 L(KX11)原车热点的兼容性,补充连接条件与连接阶段诊断。
- 新增导航投屏编辑器,可调整导航提示的位置和大小,并按需添加车速、转速、灯光和时钟。
- 支持通过三指上滑切换导航提示投屏,保留原有三指下滑操作。
- 新增独立车桥客户端,支持导入车辆扫描报告和选择车型预设;车辆数据及方向盘按键需要配套车桥与车机支持。
- 改善方向盘按键的接入与事件占用处理;实际支持情况取决于车机提供的接口与权限。
适用于 Android 9 及以上车机。仪表和 HUD 功能需要车机开放相应显示与悬浮窗能力。当前导航投屏显示导航提示,完整地图投屏仍在开发中。本次版本尚需实车验证。
配套车桥
GD 车桥 0.11.22 支持车辆数据与方向盘按键接入。请先安装车桥,再安装 DiPlay;两者均要求 Android 9 及以上。实际支持情况取决于车机接口与权限。
DiPlay v0.2.12
DiPlay 0.2.12 — 2026-10-05 更新
本次更新
- 新增自动无线连接:优先使用车机当前已开启的热点,无法使用时自动尝试其他兼容方式。
- Android 9 车机可在系统允许时读取当前热点名称和密码,避免保存的旧密码导致反复连接失败。
- 新增“同一 Wi-Fi”连接方式,车机与 iPhone 可通过同一路由器或便携热点连接。
- 改善无线连接准备和重试,减少热点已经开启却一直停在准备界面的情况。
- 改善 Wi-Fi Direct 连接稳定性,并保留首选信道设置。
- 改善 iPhone USB 接入和授权提示识别,避免误操作无关窗口。
- 改善分屏、短屏和桌面卡片中的画面比例、触控位置与系统栏显示。
- 新增跟随系统、光线、固定日间和固定夜间的 CarPlay 外观模式。
- 自定义分辨率现支持 30%–160%,并会在车机不支持时自动回到合适的显示比例。
- 增加方向盘控制仪表地图缩放和主屏焦点移动的可选功能。
- 改善仪表转向卡片、歌曲显示和专辑封面的更新与恢复。
- 诊断报告可在下载目录不可用时继续保存,并提供查看和分享入口。
- 优化画面播放兼容性与延迟控制,并根据车机能力选择合适的播放方式。
- 新增导航输出设备选择、设备编号输入和试听,方便确认所需扬声器。
- 改进 USB 通话结束后的音乐播放恢复。
- 改善方向盘按键读取状态与授权失败提示,识别无响应时可收集日志反馈。
吉利车机适配
- 改善更多老款吉利车机的热点识别,优先使用更兼容的网络地址。
- 方向盘按键识别可学习更多 OneOS 车机上报的按键,并正确区分按下与松开。
- 保留吉利车机的音乐、导航、通话和语音助手音频切换,以及蓝牙音乐交接。
- 恢复设置中的方向盘按键识别、兼容模式和 HUD 开关,并提供投影屏幕选择与内容大小调整。
- 修复 HUD 导航提示显示,恢复 G636、FX11、KX11 的原车图标、自定义返回桌面图标和音乐播放后的音频切换。
- 恢复日志收集中的问题说明和主动上传云端功能。
- 恢复“关于”页面的版本入口、来源信息和版本点击解锁的诊断入口。
同一 Wi-Fi 连接需要路由器允许设备互相访问。HUD、原车音频和方向盘功能取决于车机开放的能力;升级后无需卸载旧版本。
What’s new
- Add automatic wireless connection that first uses an active head-unit hotspot, then tries other compatible connection methods when needed.
- On Android 9 head units, use the current hotspot name and password when the system makes them available, avoiding retries with outdated saved details.
- Add Same Wi-Fi connection through a shared router or portable hotspot.
- Improve wireless preparation and bounded recovery when a hotspot is already on but CarPlay remains on the preparation screen.
- Improve Wi-Fi Direct reliability while retaining the preferred-channel setting.
- Improve iPhone USB attachment and permission-prompt matching without accepting unrelated dialogs.
- Improve video proportions, touch alignment and system bars in split screen, compact layouts and launcher cards.
- Add system, ambient-light, fixed-day and fixed-night CarPlay appearance modes.
- Allow custom resolution from 30% to 160%, with a compatible fallback when the head unit cannot use the requested size.
- Add optional steering-wheel controls for dashboard-map zoom and main-screen focus movement.
- Improve dashboard turn cards, song display and album-art continuity.
- Keep diagnostic reports available when the normal Downloads location cannot be used, with View and Share actions.
- Improve video playback compatibility and latency control, adapting playback to the head unit’s capabilities.
- Add navigation output selection, a device-number field and a test sound to help identify the desired speaker.
- Improve music playback recovery after USB phone calls.
- Improve steering-button access status and authorization messages, with a log-report option when identification receives no response.
Geely adaptation
- Improve hotspot detection on more legacy Geely head units and prefer the more compatible network address.
- Let steering-button identification learn more OneOS key codes while correctly matching press and release events.
- Retain Geely audio switching for music, guidance, calls and the voice assistant, including Bluetooth music handoff.
- Restore steering-button identification, compatibility mode and HUD settings, including display selection and content size.
- Fix HUD navigation guidance and restore factory icons, custom home icons and audio switching when music playback resumes on G636, FX11 and KX11.
- Restore problem descriptions and user-triggered diagnostic uploads to the cloud.
- Restore the About page’s version control, source information and diagnostics unlocked by tapping the version.
Same Wi-Fi requires the router to allow communication between connected devices. HUD, factory audio and steering controls depend on capabilities exposed by the head unit. The update can be installed over the previous version.
DiPlay v0.2.11
DiPlay 0.2.11 — 2026-10-04 更新
本次更新
- 修复部分车机无线连接后音乐、导航、通话和语音助手仍从手机发声的问题。
- 修复 KX11 无线连接画面正常但声音仍从手机播放的问题;有线连接继续使用已验证的音频方式。
- 修复 Android 9 KX11 已开启车机热点仍停在准备中的问题。
- Android 9 KX11 不再默认接入原车方向盘按键,避免左右切歌和暂停冲突;需要时仍可在设置中开启兼容模式。
- 修复更多吉利老款车机无线连接一直停在启动中的问题。
- 修复 KX11 车机通话、语音助手和导航可能无声的问题。
- 导航播报时音乐衔接更平顺,并适配银河 E5 的原车音频输出。
- G636、FX11 和 KX11 默认接入原车方向盘按键;按键识别无需先连接调试服务。
- HUD 投影会列出车机当前开放的副屏,可选择自动匹配或手动指定目标屏幕,并记住选择。
- HUD 诊断会记录悬浮窗权限、所选屏幕、当前连接屏幕和可用副屏,便于定位无显示问题。
- 无线连接可为下一次连接选择 Wi-Fi Direct 信道;“自动”仍是默认选项。
- 仪表地图可使用可调位置和大小的转向提示卡。
- 可选择两指、三指或四指下滑打开 DiPlay 设置。
- 增加高级车辆数据设置和受支持车机的自动热点启动选项。
- 改善 Android 9 音频兼容性、连接恢复、媒体更新和诊断信息。
吉利车机适配
- 沿用 GD 已验证的 Android 副屏投影方式,不再要求副屏名称必须包含“HUD”。
- 保留自定义 CarPlay 返回桌面图标、导航独立通道、音频焦点和蓝牙音乐交接。
- 媒体方控、原厂语音键和方向盘按键识别可直接使用吉利车机提供的按键服务。
- 用户可填写故障并主动将脱敏诊断报告上传云端;单份报告上限为 1 MiB。
本次合并沿用上游版本号 0.2.11 / code 30。HUD 投影仍要求车机把对应副屏开放给 Android;多副屏车机请在设置中选择实际 HUD 屏幕。
What’s new
- Restore wireless music, navigation, calls and voice-assistant audio on head units that previously kept sound on the phone.
- Restore wireless CarPlay sound on KX11 while keeping the proven wired audio path.
- Recognize the hotspot interface used by Android 9 KX11 head units so wireless CarPlay can leave the preparation screen.
- Leave direct steering controls off by default on Android 9 KX11 to avoid playback-control conflicts; the compatibility option remains available in settings.
- Fix wireless CarPlay remaining on the starting screen on more legacy Geely head units.
- Restore calls, voice assistant audio and guidance on KX11 head units.
- Keep music smoother during guidance and support the Galaxy E5 factory audio output.
- Enable direct steering controls and button identification on G636, FX11 and KX11 without requiring log access first.
- HUD projection lists active secondary displays, supports automatic or manual selection, and remembers the target.
- HUD diagnostics record overlay permission, the selected and attached screens, and all available secondary displays.
- Choose a preferred Wi-Fi Direct channel for the next connection while keeping Auto as the default.
- Use a movable, resizable dashboard turn card and a configurable two-, three- or four-finger settings gesture.
- Add advanced vehicle-data settings, optional hotspot startup on supported head units, Android 9 audio compatibility improvements, connection recovery and richer diagnostics.
Geely adaptation
- Use the GD secondary-display projection path without requiring the display name to contain “HUD”.
- Retain the custom CarPlay home icon, separate guidance channel, audio focus and Bluetooth music handoff.
- Use the Geely head unit's button service directly for media controls, the factory voice key and button identification.
- Let the user describe a problem and explicitly upload a redacted diagnostic report to the cloud, limited to 1 MiB per report.
This merge keeps the upstream version 0.2.11 / code 30. HUD projection still requires the head unit to expose the target as an Android secondary display.
DiPlay v0.2.10
DiPlay 0.2.10 — 2026-10-03 更新
本次更新
- 在兼容的桌面和媒体界面上显示歌曲、艺人、播放进度及专辑封面。
- 改善有线连接启动,并减少无线连接初始化失败的情况。
- 通话可使用车机支持的回声消除和降噪,结束后恢复原有音频状态。
- 新增主界面地图跟随仪表地图的显示开关,可单独隐藏主界面地图。
- 支持的视频播放可拖动进度,并向前或向后跳转 10 秒;仅在驻车条件满足的车机上可用。
- 改善兼容比亚迪车型的电量信息读取,并补充乌克兰语界面翻译。
吉利适配与方向盘按键
- 设置中可选择并裁剪 CarPlay 返回车机桌面的图标,也可随时恢复默认图标。
- 诊断页面新增故障描述和一键上传云端,只有用户主动点击后才会投送报告;单份报告上限为 1 MiB。
- 修复吉利原厂环境中导航声音未使用独立导航通道的问题;已手动选择的通道保持不变。
- 修复部分车型无线 CarPlay 与原车蓝牙音乐争抢播放通道的问题。
- 改善部分 Android 11 车机隐藏系统栏后的全屏恢复,减少画面底部被系统栏占用。
- 媒体方控随当前 CarPlay 音源接管,减少按键被原车蓝牙播放器截获。
- 保留原厂返回桌面图标、音频协调、蓝牙音乐切换、原厂语音键识别和 HUD 设置。
- 方控继续通过本应用的按键识别功能配置,支持保存、导出和上传云端。
- 更新后继续使用已有配置和配对信息。
功能效果取决于车机支持的能力和权限。本次音频通道修复适用于发出蓝牙音乐交接请求的车型;星越 L KX11 已根据用户诊断日志完成针对性适配,仍需安装后复测。吉利 G636 / FX11 仍需连接 iPhone 后实车确认。HUD 导航仅支持车机开放的 HUD 显示屏。
What's new
- Show song details, playback position and album artwork on compatible launchers and media displays.
- Improve wired startup and reduce wireless initialization failures.
- Use available head-unit echo cancellation and noise suppression for calls, restoring the previous audio mode afterward.
- Add a switch to hide the home-screen dashboard-map mirror independently.
- Seek supported videos and skip backward or forward by ten seconds on head units that meet the parked-playback requirements.
- Improve battery information on compatible BYD vehicles and extend Ukrainian translations.
Geely adaptation and steering controls
- Choose and crop the CarPlay return-to-home icon in Settings, or restore the default.
- Add an issue-description field and one-tap diagnostic upload; reports are sent only after the user taps upload and are limited to 1 MiB each.
- Route guidance through the separate factory navigation channel on Geely head units while preserving a channel selected by the user.
- Fix factory Bluetooth music competing with wireless CarPlay for audio on affected head units.
- Improve full-screen recovery after hiding the system bars on affected Android 11 head units.
- Keep media steering controls with the active CarPlay source instead of the factory Bluetooth player.
- Retain factory return-to-home artwork, coordinated audio, Bluetooth music handoff, factory voice-button recognition and HUD settings.
- Continue identifying steering buttons within the app, with saved configurations, export and cloud upload.
- Retain existing settings and pairing records when updating.
Features depend on the head unit's capabilities and permissions. The audio-channel fix applies when a head unit receives the Bluetooth music handoff request. The Xingyue L KX11 adaptation is based on a user diagnostic report and still needs an installed retest; Geely G636 / FX11 behavior still needs vehicle verification with an iPhone. HUD navigation requires a HUD display exposed by the head unit.
DiPlay v0.2.9
DiPlay 0.2.9 — 2026-10-03 更新
吉利车机适配
- CarPlay 的返回桌面按钮优先使用车机自带的 Geely 图标;无法读取时使用桌面图标。
- 优化音乐、导航、Siri 和通话的声音切换,减少同时播放和抢占音源的情况。
- 改善当前 CarPlay 手机与车机蓝牙音乐的切换,保留其他设备的连接和配对。
- 支持识别原厂语音按键的按下与松开信息,媒体按键仍可通过按键识别进行配置。
- HUD 导航仅显示在车机提供的 HUD 屏幕上,采用透明背景,并自动清除过期提示。
吉利 G636 / FX11 的实际效果取决于车机开放的功能和权限,仍需连接 iPhone 后实车确认。
方向盘按键
- 新增“设置 → 按键识别”,可将方向盘按钮设置为播放/暂停、下一曲、上一曲或 Siri。
- 选择功能后按下对应按钮,识别结果会自动填入,保存后立即生效。
- 按车型和车机型号保存配置并上传云端;断网时保留配置,恢复联网后自动继续上传。
- 支持导出已保存的配置,也可恢复原有按键功能;恢复后仍可导出原配置。
首次识别需要车机允许读取按键信息。识别效果取决于车机提供的信息,实际车型兼容性仍需实车确认。
Geely head units
- Use the head unit’s Geely artwork for CarPlay’s return-to-home button when available, with a house icon as the fallback.
- Improve switching between music, navigation, Siri and calls, reducing competing audio sources.
- Improve Bluetooth music handoff for the active CarPlay phone while retaining other devices and pairings.
- Recognize factory voice-button press and release information. Other media controls can be configured through button identification.
- Limit HUD navigation to an available HUD display, use a transparent background and clear expired guidance.
Actual behavior on Geely G636 / FX11 depends on the head unit’s capabilities and permissions and still needs vehicle verification with an iPhone.
Steering wheel controls
- Add Settings → Identify steering buttons, with assignments for play/pause, next track, previous track and Siri.
- Choose an action and press its button. Identification fills the assignment automatically; Save applies it immediately.
- Save configurations by vehicle and head unit model and upload them to the cloud. Saved configurations are retained offline and uploads resume when internet access returns.
- Export saved configurations or restore the original controls. Restoring retains the saved configuration for export.
Identification requires the head unit to allow button access and provide useful button information. Compatibility with individual vehicles still needs physical verification.