v0.94.485

What a new install sees: the EV, every controllable load and the daily figures on Topology, one SoC per battery, and a revised tab beside yours.

Found by setting Nimbus up from scratch on the test box, with only the
dashboard Nimbus generates.

• Topology draws your EV (#2021). A battery participant was drawn only on
  an install with no inverters, strings or towers set up; it now appears as
  its own source and battery beside them.
• Topology draws every controllable load (#2021): a heat pump, pool pump,
  hot water or appliance under Nimbus's control, as a dashed row after the
  Loads, with whether Nimbus has it on (or its live power, where it has a
  power sensor) and today's energy against its target. Before, none appeared.
• Topology shows the whole house and today's solar, battery and load
  figures (#2021) with nothing to add. They needed a whole_house block in
  the card's YAML, which the generated dashboard never had; they now come from
  the Solver's whole-house sensor and household load forecast, and a
  whole_house block still replaces them.
• The Grid box shows the grid on an install whose Power Signals were left at
  Role Other (#2021), from the Forecaster's own Grid and Battery sensors. A
  Role or a card setting still comes first.
• One SoC per battery on the Solver tab (#2021). With an EV, "Battery,
  now" and "At a glance" showed every battery's charge together, a figure no
  meter reads; each battery now has its own row and ring under its own name.
  A single-battery install is unchanged.
• A revised tab goes right beside your own tab of the same title (#2020),
  so the two can be compared, instead of at the end of the dashboard.
• Devhub validation: confirmed live on devhub (HA 2026.10.2) at 3aa1bf0
  (release/0.94.485), installed via HACS and restarted at 17:57 AEST; all 126
  Nimbus entities carrying a version read 0.94.485, and the first solve at
  17:58:44 was optimal. sensor.nimbus_topology_config lists the test EV
  beside both inverters, all six controllable loads with their own Commanded
  State and today's sensors resolved, and the Forecaster's Grid and Battery
  sensors as forecaster_meters. On the Topology tab (after a hard reload):
  the whole-house headline with daily solar, battery and load; the Grid box at
  -11.2 kW with both signals at Role Other; the EV with its SoC; a dashed row
  per controllable load, the one commanded on lit. The Solver tab's "Battery,
  now" and "At a glance" show "SoC Home battery" and "SoC Test EV" in place of
  the fleet figure. No Nimbus ERROR or traceback in the log after the restart
  (the only tracebacks were the restart request's own connection closing).
  • Not observable on devhub: a revised tab placed beside a household tab of
    the same title (#2020) needs a dashboard where Nimbus finds a missing
    standard tab; carried by #2020's tests. A browser keeps the old card until
    the version changes or a hard reload.
• Consumer check: display only. Topology gains the EV, controllable loads and
  the headline with nothing to configure; a card with its own whole_house or
  switchboard keeps them. A single-battery install's Solver tab is unchanged.