You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
Capacitors switched over to 0805 and clearly labelled for easy assembly
Resistors have been converted to use standard through-hole resistors, with clearly marked resistance values
Custom ESP32 footprint clearly marks essential pins, and makes soldering of the underside ground pads far easier
Optional USB Mini-B footprint which may be populated if USB-C is beyond your ability to solder
Standardised all buttons to use generic 6mm SPST buttons
Now uses a pair of round 3mm THT LEDs rather than SMD ones; RGB LED remains unchanged
5V->3V3 Regulator switched to a slighty smaller and cheaper MSKSEMI AMS1117 rather than AMS (C5120796)
Board footprint heavily reduced compared to V1.2, only slightly exceeding V2.2L
Important Notes:
LCSC does not stock a 433MHz antenna that would be suitable for this board, thus you need to order one from Aliexpress; I reccomend one 28mm long, which rises up 6mm before bending.
Install only one of the USB ports. If installing the USB-C port, R5 & R4 must be installed also.
LCSC Project file included for quickly ordering the full BoM; Antenna & ESP32 to be ordered from Aliexpress. The total BoM from LCSC comes out to $8.9 USD