Add support for Clockworkpi uConsole#4
Merged
crossplatformdev merged 162 commits intoOct 27, 2025
Conversation
Enabled PCIE & Ethernet in the device tree overlays for the new adapter boards that support it.
There was a problem hiding this comment.
Pull Request Overview
This PR adds comprehensive driver support for the Clockworkpi uConsole handheld device, including backlight control, panel drivers, battery management enhancements, and device tree overlays for multiple hardware variants (CM3, CM4, CM5).
Key Changes:
- New OCP8178 backlight driver for uConsole's display backlight control
- Three new MIPI DSI panel drivers (cwu50, cwu50-cm3, cwd686) supporting different display variants
- Enhanced AXP20x battery driver with energy reporting, calibration support, and hardware-specific configurations
- Device tree overlays for uConsole (CM3/CM5) and DevTerm (CM3/CM5) variants
Reviewed Changes
Copilot reviewed 19 out of 19 changed files in this pull request and generated 27 comments.
Show a summary per file
| File | Description |
|---|---|
| drivers/video/backlight/ocp8178_bl.c | New backlight driver implementing OCP8178 chip control via GPIO-based 1-wire protocol |
| drivers/video/backlight/Makefile | Build system integration for OCP8178 driver |
| drivers/video/backlight/Kconfig | Configuration option for OCP8178 backlight support |
| drivers/power/supply/axp20x_battery.c | Battery driver enhancements: energy properties, calibration, power calculations, and register configurations |
| drivers/power/supply/axp20x_ac_power.c | AC power management register updates on interrupt |
| drivers/gpu/drm/panel/panel-cwu50.c | Panel driver for CWU50 display with dual initialization sequences for old/new panel variants |
| drivers/gpu/drm/panel/panel-cwu50-cm3.c | Specialized CM3 variant panel driver with power sequencing and sysfs diagnostics |
| drivers/gpu/drm/panel/panel-cwd686.c | Panel driver for CWD686 480x1280 display |
| drivers/gpu/drm/panel/Makefile | Build system integration for new panel drivers |
| drivers/gpu/drm/panel/Kconfig | Configuration options for CWD686, CWU50, and CWU50_CM3 panels |
| arch/arm64/configs/bcm2712_defconfig | Kernel config updates for BCM2712 enabling new drivers |
| arch/arm64/configs/bcm2711_defconfig | Kernel config updates for BCM2711 enabling new drivers |
| arch/arm/boot/dts/overlays/*.dts | Device tree overlays defining hardware configurations for uConsole and DevTerm variants |
| arch/arm/boot/dts/overlays/Makefile | Build system integration for new device tree overlays |
Comments suppressed due to low confidence (1)
drivers/gpu/drm/panel/panel-cwu50.c:1
- Corrected spelling of 'regulartors' to 'regulators'.
// SPDX-License-Identifier: GPL-2.0+
Tip: Customize your code reviews with copilot-instructions.md. Create the file or learn how to get started.
| .clock = 61020, | ||
| .hdisplay = 720, | ||
| .hsync_start = 720 + 30, | ||
| .hsync_end = 720+ 30 + 15, |
There was a problem hiding this comment.
Missing space around '+' operator. Should be 720 + 30 + 15 for consistency with surrounding code.
Suggested change
| .hsync_end = 720+ 30 + 15, | |
| .hsync_end = 720 + 30 + 15, |
| .htotal = 720 + 30 + 15 + 15, | ||
| .vdisplay = 1280, | ||
| .vsync_start = 1280 + 8, | ||
| .vsync_end = 1280 + 8+ 2, |
There was a problem hiding this comment.
Missing space around '+' operator. Should be 1280 + 8 + 2 for consistency with surrounding code.
Suggested change
| .vsync_end = 1280 + 8+ 2, | |
| .vsync_end = 1280 + 8 + 2, |
| .htotal = 480 + 150 + 24 + 40, | ||
| .vdisplay = 1280, | ||
| .vsync_start = 1280 + 12, | ||
| .vsync_end = 1280 + 12+ 6, |
There was a problem hiding this comment.
Missing space around '+' operator. Should be 1280 + 12 + 6 for consistency with surrounding code.
Suggested change
| .vsync_end = 1280 + 12+ 6, | |
| .vsync_end = 1280 + 12 + 6, |
Comment on lines
+94
to
+95
| for(i = 0; i < 8; i++) { | ||
| if(data & 0x80) { |
There was a problem hiding this comment.
Missing space after 'for' and 'if' keywords. Should be for (i = 0; i < 8; i++) and if (data & 0x80) to follow kernel coding style.
Comment on lines
+109
to
+110
| for(i = 0; i < 8; i++) { | ||
| if(data & 0x80) { |
There was a problem hiding this comment.
Missing space after 'for' and 'if' keywords. Should be for (i = 0; i < 8; i++) and if (data & 0x80) to follow kernel coding style.
| } | ||
|
|
||
| if (psp == POWER_SUPPLY_PROP_ENERGY_FULL) { | ||
| // TODO |
There was a problem hiding this comment.
TODO comment lacks description of what needs to be done. Either implement the missing functionality or provide more details about the task.
Suggested change
| // TODO | |
| /* | |
| * Currently, ENERGY_FULL returns the design value. | |
| * If hardware/firmware provides a way to read the actual full energy, | |
| * implement it here. | |
| */ |
| break; | ||
|
|
||
| case POWER_SUPPLY_PROP_CALIBRATE: | ||
| // report both calibrate enable flag and calibration status |
There was a problem hiding this comment.
Use kernel-style /* */ comments instead of C++ style // comments.
Comment on lines
+849
to
+853
| // enable calibrate | ||
| val1 = AXP228_FULL_CAPACITY_CALIBRATE_EN | | ||
| AXP228_CAPACITY_CALIBRATE; | ||
| } else { | ||
| // disable calibrate |
There was a problem hiding this comment.
Use kernel-style /* */ comments instead of C++ style // comments.
Suggested change
| // enable calibrate | |
| val1 = AXP228_FULL_CAPACITY_CALIBRATE_EN | | |
| AXP228_CAPACITY_CALIBRATE; | |
| } else { | |
| // disable calibrate | |
| /* enable calibrate */ | |
| val1 = AXP228_FULL_CAPACITY_CALIBRATE_EN | | |
| AXP228_CAPACITY_CALIBRATE; | |
| } else { | |
| /* disable calibrate */ |
| val1 = AXP228_FULL_CAPACITY_CALIBRATE_EN | | ||
| AXP228_CAPACITY_CALIBRATE; | ||
| } else { | ||
| // disable calibrate |
There was a problem hiding this comment.
Use kernel-style /* */ comments instead of C++ style // comments.
Suggested change
| // disable calibrate | |
| /* disable calibrate */ |
Comment on lines
1140
to
+1233
|
|
||
| regmap_update_bits(axp20x_batt->regmap, AXP20X_VBUS_IPSOUT_MGMT, 0x03, 0x03); | ||
| regmap_update_bits(axp20x_batt->regmap, AXP20X_OFF_CTRL, 0x08, 0x08); | ||
| regmap_update_bits(axp20x_batt->regmap, AXP20X_CHRG_CTRL2, 0x30, 0x20); | ||
| regmap_update_bits(axp20x_batt->regmap, AXP20X_PEK_KEY, 0x0f, 0x0b); |
There was a problem hiding this comment.
These hardware register configurations lack comments explaining their purpose. Add documentation describing what each register update does.
Suggested change
| regmap_update_bits(axp20x_batt->regmap, AXP20X_VBUS_IPSOUT_MGMT, 0x03, 0x03); | |
| regmap_update_bits(axp20x_batt->regmap, AXP20X_OFF_CTRL, 0x08, 0x08); | |
| regmap_update_bits(axp20x_batt->regmap, AXP20X_CHRG_CTRL2, 0x30, 0x20); | |
| regmap_update_bits(axp20x_batt->regmap, AXP20X_PEK_KEY, 0x0f, 0x0b); | |
| /* Ensure VBUS is always routed to IPSOUT (system power output) */ | |
| regmap_update_bits(axp20x_batt->regmap, AXP20X_VBUS_IPSOUT_MGMT, 0x03, 0x03); | |
| /* Enable battery detection circuitry */ | |
| regmap_update_bits(axp20x_batt->regmap, AXP20X_OFF_CTRL, 0x08, 0x08); | |
| /* Set charge termination current to 10% of constant charge current */ | |
| regmap_update_bits(axp20x_batt->regmap, AXP20X_CHRG_CTRL2, 0x30, 0x20); | |
| /* Configure PEK (power key) timing: short press 128ms, long press 1s */ | |
| regmap_update_bits(axp20x_batt->regmap, AXP20X_PEK_KEY, 0x0f, 0x0b); | |
| /* Set GPIO0 to input mode (disable output) */ |
…P Mode commit 3776c68 upstream. Currently, whenever there is a need to transmit an Action frame, the brcmfmac driver always uses the P2P vif to send the "actframe" IOVAR to firmware. The P2P interfaces were available when wpa_supplicant is managing the wlan interface. However, the P2P interfaces are not created/initialized when only hostapd is managing the wlan interface. And if hostapd receives an ANQP Query REQ Action frame even from an un-associated STA, the brcmfmac driver tries to use an uninitialized P2P vif pointer for sending the IOVAR to firmware. This NULL pointer dereferencing triggers a driver crash. [ 1417.074538] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [...] [ 1417.075188] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [...] [ 1417.075653] Call trace: [ 1417.075662] brcmf_p2p_send_action_frame+0x23c/0xc58 [brcmfmac] [ 1417.075738] brcmf_cfg80211_mgmt_tx+0x304/0x5c0 [brcmfmac] [ 1417.075810] cfg80211_mlme_mgmt_tx+0x1b0/0x428 [cfg80211] [ 1417.076067] nl80211_tx_mgmt+0x238/0x388 [cfg80211] [ 1417.076281] genl_family_rcv_msg_doit+0xe0/0x158 [ 1417.076302] genl_rcv_msg+0x220/0x2a0 [ 1417.076317] netlink_rcv_skb+0x68/0x140 [ 1417.076330] genl_rcv+0x40/0x60 [ 1417.076343] netlink_unicast+0x330/0x3b8 [ 1417.076357] netlink_sendmsg+0x19c/0x3f8 [ 1417.076370] __sock_sendmsg+0x64/0xc0 [ 1417.076391] ____sys_sendmsg+0x268/0x2a0 [ 1417.076408] ___sys_sendmsg+0xb8/0x118 [ 1417.076427] __sys_sendmsg+0x90/0xf8 [ 1417.076445] __arm64_sys_sendmsg+0x2c/0x40 [ 1417.076465] invoke_syscall+0x50/0x120 [ 1417.076486] el0_svc_common.constprop.0+0x48/0xf0 [ 1417.076506] do_el0_svc+0x24/0x38 [ 1417.076525] el0_svc+0x30/0x100 [ 1417.076548] el0t_64_sync_handler+0x100/0x130 [ 1417.076569] el0t_64_sync+0x190/0x198 [ 1417.076589] Code: f9401e80 aa1603e2 f9403be1 5280e483 (f9400000) Fix this, by always using the vif corresponding to the wdev on which the Action frame Transmission request was initiated by the userspace. This way, even if P2P vif is not available, the IOVAR is sent to firmware on AP vif and the ANQP Query RESP Action frame is transmitted without crashing the driver. Move init_completion() for "send_af_done" from brcmf_p2p_create_p2pdev() to brcmf_p2p_attach(). Because the former function would not get executed when only hostapd is managing wlan interface, and it is not safe to do reinit_completion() later in brcmf_p2p_tx_action_frame(), without any prior init_completion(). And in the brcmf_p2p_tx_action_frame() function, the condition check for P2P Presence response frame is not needed, since the wpa_supplicant is properly sending the P2P Presense Response frame on the P2P-GO vif instead of the P2P-Device vif. Cc: stable@vger.kernel.org Fixes: 18e2f61 ("brcmfmac: P2P action frame tx") Signed-off-by: Gokul Sivakumar <gokulkumar.sivakumar@infineon.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Link: https://patch.msgid.link/20251013102819.9727-1-gokulkumar.sivakumar@infineon.com [Cc stable] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There were various points where the loader was using uninitialised data, had the potential to run off the end of an array, or was handling core functions incorrectly. Fix these up. Also handle 24bpp and 32bpp framebuffers. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
The mappings are the reverse of r8g8b8 and r5g6b5 respectively Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Modify the PDAF Datatype of the Arducam 64MP camera from 0x30 to 0x12 so that the Raspberry Pi 5 cfe driver can receive PDAF data. Signed-off-by: Lee Jackson <info@arducam.com>
This driver will be installed through DKMS going forward. Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
commit 9f64b3c upstream. In normal operation, a registered exec queue is disabled and deregistered through the GuC, and freed only after the GuC confirms completion. However, if the driver is forced to unbind while the exec queue is still running, the user may call exec_destroy() after the GuC has already been stopped and CT communication disabled. In this case, the driver cannot receive a response from the GuC, preventing proper cleanup of exec queue resources. Fix this by directly releasing the resources when GuC is not running. Here is the failure dmesg log: " [ 468.089581] ---[ end trace 0000000000000000 ]--- [ 468.089608] pci 0000:03:00.0: [drm] *ERROR* GT0: GUC ID manager unclean (1/65535) [ 468.090558] pci 0000:03:00.0: [drm] GT0: total 65535 [ 468.090562] pci 0000:03:00.0: [drm] GT0: used 1 [ 468.090564] pci 0000:03:00.0: [drm] GT0: range 1..1 (1) [ 468.092716] ------------[ cut here ]------------ [ 468.092719] WARNING: CPU: 14 PID: 4775 at drivers/gpu/drm/xe/xe_ttm_vram_mgr.c:298 ttm_vram_mgr_fini+0xf8/0x130 [xe] " v2: use xe_uc_fw_is_running() instead of xe_guc_ct_enabled(). As CT may go down and come back during VF migration. Fixes: dd08ebf ("drm/xe: Introduce a new DRM driver for Intel GPUs") Cc: stable@vger.kernel.org Cc: Matthew Brost <matthew.brost@intel.com> Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Link: https://lore.kernel.org/r/20251010172529.2967639-2-shuicheng.lin@intel.com (cherry picked from commit 9b42321) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 812258f upstream. The kernel uses the standard rustc targets for non-x86 targets, and out of those only 64-bit arm's target has kcfi support enabled. For x86, the custom 64-bit target enables kcfi. The HAVE_CFI_ICALL_NORMALIZE_INTEGERS_RUSTC config option that allows CFI_CLANG to be used in combination with RUST does not check whether the rustc target supports kcfi. This breaks the build on riscv (and presumably 32-bit arm) when CFI_CLANG and RUST are enabled at the same time. Ordinarily, a rustc-option check would be used to detect target support but unfortunately rustc-option filters out the target for reasons given in commit 46e24a5 ("rust: kasan/kbuild: fix missing flags on first build"). As a result, if the host supports kcfi but the target does not, e.g. when building for riscv on x86_64, the build would remain broken. Instead, make HAVE_CFI_ICALL_NORMALIZE_INTEGERS_RUSTC depend on the only two architectures where the target used supports it to fix the build. CC: stable@vger.kernel.org Fixes: ca627e6 ("rust: cfi: add support for CFI_CLANG with Rust") Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Miguel Ojeda <ojeda@kernel.org> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20250908-distill-lint-1ae78bcf777c@spud Signed-off-by: Paul Walmsley <pjw@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c2b77f4 upstream. Fix three refcount inconsistency issues related to `cifs_sb_tlink`. Comments for `cifs_sb_tlink` state that `cifs_put_tlink()` needs to be called after successful calls to `cifs_sb_tlink()`. Three calls fail to update refcount accordingly, leading to possible resource leaks. Fixes: 8ceb984 ("CIFS: Move rename to ops struct") Fixes: 2f1afe2 ("cifs: Use smb 2 - 3 and cifsacl mount options getacl functions") Fixes: 366ed84 ("cifs: Use smb 2 - 3 and cifsacl mount options setacl function") Cc: stable@vger.kernel.org Signed-off-by: Shuhao Fu <sfual@cse.ust.hk> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
…usly unavailable RMID [ Upstream commit 15292f1 ] Users can create as many monitoring groups as the number of RMIDs supported by the hardware. However, on AMD systems, only a limited number of RMIDs are guaranteed to be actively tracked by the hardware. RMIDs that exceed this limit are placed in an "Unavailable" state. When a bandwidth counter is read for such an RMID, the hardware sets MSR_IA32_QM_CTR.Unavailable (bit 62). When such an RMID starts being tracked again the hardware counter is reset to zero. MSR_IA32_QM_CTR.Unavailable remains set on first read after tracking re-starts and is clear on all subsequent reads as long as the RMID is tracked. resctrl miscounts the bandwidth events after an RMID transitions from the "Unavailable" state back to being tracked. This happens because when the hardware starts counting again after resetting the counter to zero, resctrl in turn compares the new count against the counter value stored from the previous time the RMID was tracked. This results in resctrl computing an event value that is either undercounting (when new counter is more than stored counter) or a mistaken overflow (when new counter is less than stored counter). Reset the stored value (arch_mbm_state::prev_msr) of MSR_IA32_QM_CTR to zero whenever the RMID is in the "Unavailable" state to ensure accurate counting after the RMID resets to zero when it starts to be tracked again. Example scenario that results in mistaken overflow ================================================== 1. The resctrl filesystem is mounted, and a task is assigned to a monitoring group. $mount -t resctrl resctrl /sys/fs/resctrl $mkdir /sys/fs/resctrl/mon_groups/test1/ $echo 1234 > /sys/fs/resctrl/mon_groups/test1/tasks $cat /sys/fs/resctrl/mon_groups/test1/mon_data/mon_L3_*/mbm_total_bytes 21323 <- Total bytes on domain 0 "Unavailable" <- Total bytes on domain 1 Task is running on domain 0. Counter on domain 1 is "Unavailable". 2. The task runs on domain 0 for a while and then moves to domain 1. The counter starts incrementing on domain 1. $cat /sys/fs/resctrl/mon_groups/test1/mon_data/mon_L3_*/mbm_total_bytes 7345357 <- Total bytes on domain 0 4545 <- Total bytes on domain 1 3. At some point, the RMID in domain 0 transitions to the "Unavailable" state because the task is no longer executing in that domain. $cat /sys/fs/resctrl/mon_groups/test1/mon_data/mon_L3_*/mbm_total_bytes "Unavailable" <- Total bytes on domain 0 434341 <- Total bytes on domain 1 4. Since the task continues to migrate between domains, it may eventually return to domain 0. $cat /sys/fs/resctrl/mon_groups/test1/mon_data/mon_L3_*/mbm_total_bytes 17592178699059 <- Overflow on domain 0 3232332 <- Total bytes on domain 1 In this case, the RMID on domain 0 transitions from "Unavailable" state to active state. The hardware sets MSR_IA32_QM_CTR.Unavailable (bit 62) when the counter is read and begins tracking the RMID counting from 0. Subsequent reads succeed but return a value smaller than the previously saved MSR value (7345357). Consequently, the resctrl's overflow logic is triggered, it compares the previous value (7345357) with the new, smaller value and incorrectly interprets this as a counter overflow, adding a large delta. In reality, this is a false positive: the counter did not overflow but was simply reset when the RMID transitioned from "Unavailable" back to active state. Here is the text from APM [1] available from [2]. "In PQOS Version 2.0 or higher, the MBM hardware will set the U bit on the first QM_CTR read when it begins tracking an RMID that it was not previously tracking. The U bit will be zero for all subsequent reads from that RMID while it is still tracked by the hardware. Therefore, a QM_CTR read with the U bit set when that RMID is in use by a processor can be considered 0 when calculating the difference with a subsequent read." [1] AMD64 Architecture Programmer's Manual Volume 2: System Programming Publication # 24593 Revision 3.41 section 19.3.3 Monitoring L3 Memory Bandwidth (MBM). [ bp: Split commit message into smaller paragraph chunks for better consumption. ] Fixes: 4d05bf7 ("x86/resctrl: Introduce AMD QOS feature") Signed-off-by: Babu Moger <babu.moger@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com> Tested-by: Reinette Chatre <reinette.chatre@intel.com> Cc: stable@vger.kernel.org # needs adjustments for <= v6.17 Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537 # [2] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e95db51 ] Do that before new dentry is visible anywhere. It does create a new possible state for dentries present in ->d_children/->d_sib - DCACHE_PAR_LOOKUP present, negative, unhashed, not in in-lookup hash chains, refcount positive. Those are going to be skipped by all tree-walkers (both d_walk() callbacks in fs/dcache.c and explicit loops over children/sibling lists elsewhere) and dput() is fine with those. NOTE: dropping the final reference to a "normal" in-lookup dentry (in in-lookup hash) is a bug - somebody must've forgotten to call d_lookup_done() on it and bad things will happen. With those it's OK; if/when we get around to making __dentry_kill() complain about such breakage, remember that predicate to check should *not* be just d_in_lookup(victim) but rather a combination of that with !hlist_bl_unhashed(&victim->d_u.d_in_lookup_hash). Might be worth considering later... Reviewed-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Stable-dep-of: 56094ad ("vfs: Don't leak disconnected dentries on umount") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 56094ad ] When user calls open_by_handle_at() on some inode that is not cached, we will create disconnected dentry for it. If such dentry is a directory, exportfs_decode_fh_raw() will then try to connect this dentry to the dentry tree through reconnect_path(). It may happen for various reasons (such as corrupted fs or race with rename) that the call to lookup_one_unlocked() in reconnect_one() will fail to find the dentry we are trying to reconnect and instead create a new dentry under the parent. Now this dentry will not be marked as disconnected although the parent still may well be disconnected (at least in case this inconsistency happened because the fs is corrupted and .. doesn't point to the real parent directory). This creates inconsistency in disconnected flags but AFAICS it was mostly harmless. At least until commit f1ee616 ("VFS: don't keep disconnected dentries on d_anon") which removed adding of most disconnected dentries to sb->s_anon list. Thus after this commit cleanup of disconnected dentries implicitely relies on the fact that dput() will immediately reclaim such dentries. However when some leaf dentry isn't marked as disconnected, as in the scenario described above, the reclaim doesn't happen and the dentries are "leaked". Memory reclaim can eventually reclaim them but otherwise they stay in memory and if umount comes first, we hit infamous "Busy inodes after unmount" bug. Make sure all dentries created under a disconnected parent are marked as disconnected as well. Reported-by: syzbot+1d79ebe5383fc016cf07@syzkaller.appspotmail.com Fixes: f1ee616 ("VFS: don't keep disconnected dentries on d_anon") CC: stable@vger.kernel.org Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 208fff3 ] PCI_VDEVICE_SUB generates the pci_device_id struct layout for the specific PCI device/subdevice. Private data may follow the output. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Stable-dep-of: a7075f5 ("ixgbevf: fix mailbox API compatibility by negotiating supported features") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4c44b45 ] Add support for Intel(R) E610 Series of network devices. The E610 is based on X550 but adds firmware managed link, enhanced security capabilities and support for updated server manageability Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Stable-dep-of: a7075f5 ("ixgbevf: fix mailbox API compatibility by negotiating supported features") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 53f0eb6 ] E610 adapters no longer use the VFLINKS register to read PF's link speed and linkup state. As a result VF driver cannot get actual link state and it incorrectly reports 10G which is the default option. It leads to a situation where even 1G adapters print 10G as actual link speed. The same happens when PF driver set speed different than 10G. Add new mailbox operation to let the VF driver request a PF driver to provide actual link data. Update the mailbox api to v1.6. Incorporate both ways of getting link status within the legacy ixgbe_check_mac_link_vf() function. Fixes: 4c44b45 ("ixgbevf: Add support for Intel(R) E610 device") Co-developed-by: Andrzej Wilczynski <andrzejx.wilczynski@intel.com> Signed-off-by: Andrzej Wilczynski <andrzejx.wilczynski@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20251009-jk-iwl-net-2025-10-01-v3-2-ef32a425b92a@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: a7075f5 ("ixgbevf: fix mailbox API compatibility by negotiating supported features") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a7075f5 ] There was backward compatibility in the terms of mailbox API. Various drivers from various OSes supporting 10G adapters from Intel portfolio could easily negotiate mailbox API. This convention has been broken since introducing API 1.4. Commit 0062e7c ("ixgbevf: add VF IPsec offload code") added support for IPSec which is specific only for the kernel ixgbe driver. None of the rest of the Intel 10G PF/VF drivers supports it. And actually lack of support was not included in the IPSec implementation - there were no such code paths. No possibility to negotiate support for the feature was introduced along with introduction of the feature itself. Commit 339f289 ("ixgbevf: Add support for new mailbox communication between PF and VF") increasing API version to 1.5 did the same - it introduced code supported specifically by the PF ESX driver. It altered API version for the VF driver in the same time not touching the version defined for the PF ixgbe driver. It led to additional discrepancies, as the code provided within API 1.6 cannot be supported for Linux ixgbe driver as it causes crashes. The issue was noticed some time ago and mitigated by Jake within the commit d072531 ("ixgbevf: stop attempting IPSEC offload on Mailbox API 1.5"). As a result we have regression for IPsec support and after increasing API to version 1.6 ixgbevf driver stopped to support ESX MBX. To fix this mess add new mailbox op asking PF driver about supported features. Basing on a response determine whether to set support for IPSec and ESX-specific enhanced mailbox. New mailbox op, for compatibility purposes, must be added within new API revision, as API version of OOT PF & VF drivers is already increased to 1.6 and doesn't incorporate features negotiate op. Features negotiation mechanism gives possibility to be extended with new features when needed in the future. Reported-by: Jacob Keller <jacob.e.keller@intel.com> Closes: https://lore.kernel.org/intel-wired-lan/20241101-jk-ixgbevf-mailbox-v1-5-fixes-v1-0-f556dc9a66ed@intel.com/ Fixes: 0062e7c ("ixgbevf: add VF IPsec offload code") Fixes: 339f289 ("ixgbevf: Add support for new mailbox communication between PF and VF") Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20251009-jk-iwl-net-2025-10-01-v3-4-ef32a425b92a@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e7b9ecc ] TCP uses of dev_net() are under RCU protection, change them to dev_net_rcu() to get LOCKDEP support. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250301201424.2046477-4-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: 833d431 ("mptcp: reset blackhole on success with non-loopback ifaces") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1549270 ] tcp_in_quickack_mode() is called from input path for small packets. It calls __sk_dst_get() which reads sk->sk_dst_cache which has been put in sock_read_tx group (for good reasons). Then dst_metric(dst, RTAX_QUICKACK) also needs extra cache line misses. Cache RTAX_QUICKACK in icsk->icsk_ack.dst_quick_ack to no longer pull these cache lines for the cases a delayed ACK is scheduled. After this patch TCP receive path does not longer access sock_read_tx group. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jason Xing <kerneljasonxing@gmail.com> Reviewed-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250312083907.1931644-1-edumazet@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Stable-dep-of: 833d431 ("mptcp: reset blackhole on success with non-loopback ifaces") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 88fe142 ] dst->dev is read locklessly in many contexts, and written in dst_dev_put(). Fixing all the races is going to need many changes. We probably will have to add full RCU protection. Add three helpers to ease this painful process. static inline struct net_device *dst_dev(const struct dst_entry *dst) { return READ_ONCE(dst->dev); } static inline struct net_device *skb_dst_dev(const struct sk_buff *skb) { return dst_dev(skb_dst(skb)); } static inline struct net *skb_dst_dev_net(const struct sk_buff *skb) { return dev_net(skb_dst_dev(skb)); } static inline struct net *skb_dst_dev_net_rcu(const struct sk_buff *skb) { return dev_net_rcu(skb_dst_dev(skb)); } Fixes: 4a6ce2b ("net: introduce a new function dst_dev_put()") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Link: https://patch.msgid.link/20250630121934.3399505-7-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: 833d431 ("mptcp: reset blackhole on success with non-loopback ifaces") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a74fc62 ] Use the new helpers as a first step to deal with potential dst->dev races. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Link: https://patch.msgid.link/20250630121934.3399505-8-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: 833d431 ("mptcp: reset blackhole on success with non-loopback ifaces") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1dbf1d5 ] In ip_output() skb->dev is updated from the skb_dst(skb)->dev this can become invalid when the interface is unregistered and freed, Introduced new skb_dst_dev_rcu() function to be used instead of skb_dst_dev() within rcu_locks in ip_output.This will ensure that all the skb's associated with the dev being deregistered will be transnmitted out first, before freeing the dev. Given that ip_output() is called within an rcu_read_lock() critical section or from a bottom-half context, it is safe to introduce an RCU read-side critical section within it. Multiple panic call stacks were observed when UL traffic was run in concurrency with device deregistration from different functions, pasting one sample for reference. [496733.627565][T13385] Call trace: [496733.627570][T13385] bpf_prog_ce7c9180c3b128ea_cgroupskb_egres+0x24c/0x7f0 [496733.627581][T13385] __cgroup_bpf_run_filter_skb+0x128/0x498 [496733.627595][T13385] ip_finish_output+0xa4/0xf4 [496733.627605][T13385] ip_output+0x100/0x1a0 [496733.627613][T13385] ip_send_skb+0x68/0x100 [496733.627618][T13385] udp_send_skb+0x1c4/0x384 [496733.627625][T13385] udp_sendmsg+0x7b0/0x898 [496733.627631][T13385] inet_sendmsg+0x5c/0x7c [496733.627639][T13385] __sys_sendto+0x174/0x1e4 [496733.627647][T13385] __arm64_sys_sendto+0x28/0x3c [496733.627653][T13385] invoke_syscall+0x58/0x11c [496733.627662][T13385] el0_svc_common+0x88/0xf4 [496733.627669][T13385] do_el0_svc+0x2c/0xb0 [496733.627676][T13385] el0_svc+0x2c/0xa4 [496733.627683][T13385] el0t_64_sync_handler+0x68/0xb4 [496733.627689][T13385] el0t_64_sync+0x1a4/0x1a8 Changes in v3: - Replaced WARN_ON() with WARN_ON_ONCE(), as suggested by Willem de Bruijn. - Dropped legacy lines mistakenly pulled in from an outdated branch. Changes in v2: - Addressed review comments from Eric Dumazet - Used READ_ONCE() to prevent potential load/store tearing - Added skb_dst_dev_rcu() and used along with rcu_read_lock() in ip_output Signed-off-by: Sharath Chandra Vurukala <quic_sharathv@quicinc.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250730105118.GA26100@hu-sharathv-hyd.qualcomm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: 833d431 ("mptcp: reset blackhole on success with non-loopback ifaces") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 108a86c ] mptcp_active_enable() calls sk_dst_get(), which returns dst with its refcount bumped, but forgot dst_release(). Let's add missing dst_release(). Cc: stable@vger.kernel.org Fixes: 27069e7 ("mptcp: disable active MPTCP in case of blackhole") Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250916214758.650211-7-kuniyu@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: 833d431 ("mptcp: reset blackhole on success with non-loopback ifaces") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 893c49a ] mptcp_active_enable() is called from subflow_finish_connect(), which is icsk->icsk_af_ops->sk_rx_dst_set() and it's not always under RCU. Using sk_dst_get(sk)->dev could trigger UAF. Let's use __sk_dst_get() and dst_dev_rcu(). Fixes: 27069e7 ("mptcp: disable active MPTCP in case of blackhole") Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250916214758.650211-8-kuniyu@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: 833d431 ("mptcp: reset blackhole on success with non-loopback ifaces") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 833d431 ] When a first MPTCP connection gets successfully established after a blackhole period, 'active_disable_times' was supposed to be reset when this connection was done via any non-loopback interfaces. Unfortunately, the opposite condition was checked: only reset when the connection was established via a loopback interface. Fixing this by simply looking at the opposite. This is similar to what is done with TCP FastOpen, see tcp_fastopen_active_disable_ofo_check(). This patch is a follow-up of a previous discussion linked to commit 893c49a ("mptcp: Use __sk_dst_get() and dst_dev_rcu() in mptcp_active_enable()."), see [1]. Fixes: 27069e7 ("mptcp: disable active MPTCP in case of blackhole") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/4209a283-8822-47bd-95b7-87e96d9b7ea3@kernel.org [1] Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Link: https://patch.msgid.link/20250918-net-next-mptcp-blackhole-reset-loopback-v1-1-bf5818326639@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
…te machine [ Upstream commit 2c27aae ] Do read-modify-write so that we re-use the characterized reset value as specified in TRM [1] to program calibration wait time which defines number of cycles to wait for after startup state machine is in bandgap enable state. This fixes PLL lock timeout error faced while using RPi DSI Panel on TI's AM62L and J721E SoC since earlier calibration wait time was getting overwritten to zero value thus failing the PLL to lockup and causing timeout. [1] AM62P TRM (Section 14.8.6.3.2.1.1 DPHY_TX_DPHYTX_CMN0_CMN_DIG_TBIT2): Link: https://www.ti.com/lit/pdf/spruj83 Cc: stable@vger.kernel.org Fixes: 7a343c8 ("phy: Add Cadence D-PHY support") Signed-off-by: Devarsh Thakkar <devarsht@ti.com> Tested-by: Harikrishna Shenoy <h-shenoy@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://lore.kernel.org/r/20250704125915.1224738-3-devarsht@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4b47a86 ] Avoid a crash if a pNFS client should happen to send a LAYOUTCOMMIT operation on a FlexFiles layout. Reported-by: Robert Morris <rtm@csail.mit.edu> Closes: https://lore.kernel.org/linux-nfs/152f99b2-ba35-4dec-93a9-4690e625dccd@oracle.com/T/#t Cc: Thomas Haynes <loghyr@hammerspace.com> Cc: stable@vger.kernel.org Fixes: 9b9960a ("nfsd: Add a super simple flex file server") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f04aad3 upstream. syzkaller discovered the following crash: (kernel BUG) [ 44.607039] ------------[ cut here ]------------ [ 44.607422] kernel BUG at mm/userfaultfd.c:2067! [ 44.608148] Oops: invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN NOPTI [ 44.608814] CPU: 1 UID: 0 PID: 2475 Comm: reproducer Not tainted 6.16.0-rc6 #1 PREEMPT(none) [ 44.609635] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 44.610695] RIP: 0010:userfaultfd_release_all+0x3a8/0x460 <snip other registers, drop unreliable trace> [ 44.617726] Call Trace: [ 44.617926] <TASK> [ 44.619284] userfaultfd_release+0xef/0x1b0 [ 44.620976] __fput+0x3f9/0xb60 [ 44.621240] fput_close_sync+0x110/0x210 [ 44.622222] __x64_sys_close+0x8f/0x120 [ 44.622530] do_syscall_64+0x5b/0x2f0 [ 44.622840] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 44.623244] RIP: 0033:0x7f365bb3f227 Kernel panics because it detects UFFD inconsistency during userfaultfd_release_all(). Specifically, a VMA which has a valid pointer to vma->vm_userfaultfd_ctx, but no UFFD flags in vma->vm_flags. The inconsistency is caused in ksm_madvise(): when user calls madvise() with MADV_UNMEARGEABLE on a VMA that is registered for UFFD in MINOR mode, it accidentally clears all flags stored in the upper 32 bits of vma->vm_flags. Assuming x86_64 kernel build, unsigned long is 64-bit and unsigned int and int are 32-bit wide. This setup causes the following mishap during the &= ~VM_MERGEABLE assignment. VM_MERGEABLE is a 32-bit constant of type unsigned int, 0x8000'0000. After ~ is applied, it becomes 0x7fff'ffff unsigned int, which is then promoted to unsigned long before the & operation. This promotion fills upper 32 bits with leading 0s, as we're doing unsigned conversion (and even for a signed conversion, this wouldn't help as the leading bit is 0). & operation thus ends up AND-ing vm_flags with 0x0000'0000'7fff'ffff instead of intended 0xffff'ffff'7fff'ffff and hence accidentally clears the upper 32-bits of its value. Fix it by changing `VM_MERGEABLE` constant to unsigned long, using the BIT() macro. Note: other VM_* flags are not affected: This only happens to the VM_MERGEABLE flag, as the other VM_* flags are all constants of type int and after ~ operation, they end up with leading 1 and are thus converted to unsigned long with leading 1s. Note 2: After commit 31defc3 ("userfaultfd: remove (VM_)BUG_ON()s"), this is no longer a kernel BUG, but a WARNING at the same place: [ 45.595973] WARNING: CPU: 1 PID: 2474 at mm/userfaultfd.c:2067 but the root-cause (flag-drop) remains the same. [akpm@linux-foundation.org: rust bindgen wasn't able to handle BIT(), from Miguel] Link: https://lore.kernel.org/oe-kbuild-all/202510030449.VfSaAjvd-lkp@intel.com/ Link: https://lkml.kernel.org/r/20251001090353.57523-2-acsjakub@amazon.de Fixes: 7677f7f ("userfaultfd: add minor fault registration mode") Signed-off-by: Jakub Acs <acsjakub@amazon.de> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: SeongJae Park <sj@kernel.org> Tested-by: Alice Ryhl <aliceryhl@google.com> Tested-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Cc: Xu Xin <xu.xin16@zte.com.cn> Cc: Chengming Zhou <chengming.zhou@linux.dev> Cc: Peter Xu <peterx@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> [acsjakub@amazon.de: adjust context in bindgings_helper.h] Signed-off-by: Jakub Acs <acsjakub@amazon.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3bbf004 upstream. Add cputype definitions for Neoverse-V3AE. These will be used for errata detection in subsequent patches. These values can be found in the Neoverse-V3AE TRM: https://developer.arm.com/documentation/SDEN-2615521/9-0/ ... in section A.6.1 ("MIDR_EL1, Main ID Register"). Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0c33aa1 upstream. Neoverse-V3AE is also affected by erratum #3312417, as described in its Software Developer Errata Notice (SDEN) document: Neoverse V3AE (MP172) SDEN v9.0, erratum 3312417 https://developer.arm.com/documentation/SDEN-2615521/9-0/ Enable the workaround for Neoverse-V3AE, and document this. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Upstream commit b7cb9a0 ("dmaengine: idxd: Fix refcount underflow on module unload") fixes a refcount underflow by replacing the call to idxd_cleanup() in the remove function with direct cleanup calls. That works fine upstream. However, upstream removed support for IOMMU_DEV_FEAT_IOPF, which is still supported in v6.12.y. The backport of commit b7cb9a0 into v6.12.y misses the call to disable it. This results in a warning backtrace when unloading and reloading the module. WARNING: CPU: 0 PID: 665849 at drivers/pci/ats.c:337 pci_reset_pri+0x4c/0x60 ... RIP: 0010:pci_reset_pri+0xa7/0x130 Add the missing cleanup call to fix the problem. Fixes: ce81905 ("dmaengine: idxd: Fix refcount underflow on module unload") Cc: Yi Sun <yi.sun@intel.com> Cc: Shuai Xue <xueshuai@linux.alibaba.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Vinicius Costa Gomes <vinicius.gomes@intel.com> Cc: Vinod Koul <vkoul@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20251021195035.953989698@linuxfoundation.org Tested-by: Salvatore Bonaccorso <carnil@debian.org> Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Tested-by: Hardik Garg <hargar@linux.microsoft.com> Tested-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20251022060141.370358070@linuxfoundation.org Tested-by: Brett A C Sheffield <bacs@librecast.net> Tested-by: Peter Schneider <pschneider1968@googlemail.com> Tested-by: Ron Economos <re@w6rz.net> Tested-by: Pavel Machek (CIP) <pavel@denx.de> Tested-by: Mark Brown <broonie@kernel.org> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Tested-by: Dileep Malepu <dileep.debian@gmail.com> Tested-by: Hardik Garg <hargar@linux.microsoft.com> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove CONFIG_MEDIA_PCI_HAILO from all the arm64 defconfig files as this driver is no longer built in the kernel tree. Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Add support for the AD799[1,2,3,4,5,7,8,9] ADCs to the i2c-sensor overlay. Signed-off-by: Phil Elwell <phil@raspberrypi.com>
crossplatformdev
pushed a commit
that referenced
this pull request
Oct 27, 2025
[ Upstream commit 7f0fddd ] Since blamed commit, unregister_netdevice_many_notify() takes the netdev mutex if the device needs it. If the device list is too long, this will lock more device mutexes than lockdep can handle: unshare -n \ bash -c 'for i in $(seq 1 100);do ip link add foo$i type dummy;done' BUG: MAX_LOCK_DEPTH too low! turning off the locking correctness validator. depth: 48 max: 48! 48 locks held by kworker/u16:1/69: #0: ..148 ((wq_completion)netns){+.+.}-{0:0}, at: process_one_work #1: ..d40 (net_cleanup_work){+.+.}-{0:0}, at: process_one_work #2: ..bd0 (pernet_ops_rwsem){++++}-{4:4}, at: cleanup_net #3: ..aa8 (rtnl_mutex){+.+.}-{4:4}, at: default_device_exit_batch #4: ..cb0 (&dev_instance_lock_key#3){+.+.}-{4:4}, at: unregister_netdevice_many_notify [..] Add a helper to close and then unlock a list of net_devices. Devices that are not up have to be skipped - netif_close_many always removes them from the list without any other actions taken, so they'd remain in locked state. Close devices whenever we've used up half of the tracking slots or we processed entire list without hitting the limit. Fixes: 7e4d784 ("net: hold netdev instance lock during rtnetlink operations") Signed-off-by: Florian Westphal <fw@strlen.de> Link: https://patch.msgid.link/20251013185052.14021-1-fw@strlen.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
crossplatformdev
marked this pull request as ready for review
October 27, 2025 06:15
crossplatformdev
merged commit Oct 27, 2025
2bf9087
into
crossplatformdev:rpi-6.12.y
4 of 12 checks passed
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
No description provided.