v1.2.0-beta.5

What's Changed

• Escape entity names and card options in the curve and Clear cards by @danrspencer in #294

Full Changelog: v1.2.0-beta.4...v1.2.0-beta.5

v1.1.1

Full Changelog: v1.1.0...v1.1.1

v1.2.0-beta.4

What's Changed

• An unavailable occupancy sensor no longer switches a room off by @danrspencer in #293

Full Changelog: v1.2.0-beta.3...v1.2.0-beta.4

v1.2.0-beta.3

What's Changed

• Night can start after midnight by @danrspencer in #291

Full Changelog: v1.2.0-beta.2...v1.2.0-beta.3

v1.2.0-beta.2

What's Changed

• Quickstart: recommend assigning lights and sensors to areas first by @danrspencer in #285
• Blueprint: Sensors From Areas toggle, and a Triggers section by @danrspencer in #288

Full Changelog: v1.2.0-beta.1...v1.2.0-beta.2

v1.2.0-beta.1

What's Changed

• Setup video on the homepage, not the quickstart by @danrspencer in #279
• A release's docs follow main while its code does by @danrspencer in #280
• Docs: one set of artifacts per docs run by @danrspencer in #281
• Docs: list the rules for which lights are the room's by @danrspencer in #283
• Homepage: say that FLARE lights a room when you walk in by @danrspencer in #284
• The lighting and claims actions take lights only by @danrspencer in #282

Full Changelog: v1.1.0...v1.2.0-beta.1

v1.1.0

What's Changed

• A zone restored dark lets go of its claims by @danrspencer in #272
• A sandbox Home Assistant to try FLARE in, through mise by @danrspencer in #273
• Setup: skip or set up, schedules by shape, areas by floor, and a dashboard that loads by @danrspencer in #274
• Recorded walkthroughs on the site and README, and an amber FLARE label by @danrspencer in #275
• Fail a shipped change under a released changelog version by @danrspencer in #276
• README: just the setup GIF by @danrspencer in #277
• The FLARE label uses FLARE's logo by @danrspencer in #278

Full Changelog: v1.0.0...v1.1.0

v1.1.0-beta.2

What's Changed

• Automate releases: dev -> beta -> stable after a week by @danrspencer in #208
• Record claims before writing, and add flare.turn_off by @danrspencer in #209
• Group the code by concept, split init.py, drop the sys.path hack by @danrspencer in #207
• Version the blueprint with FLARE: its stamp is always the release version by @danrspencer in #210
• Comments describe the code as it is, not how it got here by @danrspencer in #211
• Drop config-entry migration and legacy owner-device cleanup by @danrspencer in #212
• Cut comments down to what a reader needs by @danrspencer in #213
• Split tests into unit, checks and functional; real schedule in behaviour tests by @danrspencer in #214
• Turn a room off only once every occupancy sensor has been clear for the Wait time by @danrspencer in #215
• Spread room updates across the minute, and skip changes too small to notice by @danrspencer in #216
• Rooms pick their zone explicitly by @danrspencer in #217
• Land the stacked PRs #218–#222 on main by @danrspencer in #223
• Docs: ordinary HA parts, an examples page, and Reference in place of Power users by @danrspencer in #224
• Changelog: move unreleased changes to 0.18.0 so betas cut again by @danrspencer in #225
• Warn about a light in two zones with a notification, not a repair by @danrspencer in #226
• Give the Schedule input a Details link, matching Zone by @danrspencer in #227
• Docs: defaults as defaults, no self-praise, each thing once by @danrspencer in #229
• Docs: Guides and Reference, and the second round of review by @danrspencer in #230
• Docs: plain technical writing, and the third round of review by @danrspencer in #231
• Blueprint: motion sensor support, and restructure its reference page by @danrspencer in #232
• CI: HACS action and hassfest validation by @danrspencer in #233
• Target 1.0.0 instead of 0.18.0 by @danrspencer in #234
• Add an Open in HACS button by @danrspencer in #236
• Docs: explain how latest is promoted to observed by @danrspencer in #237
• Docs: clean up the Services reference and services.yaml by @danrspencer in #238
• Docs: ban staccato prose, and lay the services page out like Home Assistant's by @danrspencer in #239
• Services take brightness levels, not multipliers by @danrspencer in #240
• A brightness of 0 is off, as it is for light.turn_on by @danrspencer in #241
• Route every override-protection check through one classify_state() by @danrspencer in #242
• Flares: a light over each room's automation, for HomeKit and voice assistants by @danrspencer in #243
• Docs: link each homepage claim to the docs behind it by @danrspencer in #244
• Docs: remove the links from the homepage's claims by @danrspencer in #245
• Docs: say when flare.claims_override is needed by @danrspencer in #246
• Docs: turning a flare on, in the remote example by @danrspencer in #247
• Ship the blueprint inside the integration by @danrspencer in #248
• Recognise the blueprint by name only by @danrspencer in #249
• Require Home Assistant 2026.10.0 through HACS by @danrspencer in #250
• Revert the Home Assistant 2026.10.0 minimum until it's out of beta by @danrspencer in #255
• Set up areas from the integration page by @danrspencer in #251
• Resend a command lost as a light comes back online, not an override by @danrspencer in #254
• Dashboard: a FLARE Lighting dashboard and a redesigned Zones view by @danrspencer in #252
• Docs: keep each release's docs, with the newest beta's beside them by @danrspencer in #256
• Zones: ticks as a plain event, and what a zone does in its Activity by @danrspencer in #253
• Docs: review pass over the recent pages by @danrspencer in #257
• Settling as a shared status, renamed entities, clearer setup messages by @danrspencer in #259
• Code tidy: compatibility code removed, two big files split by @danrspencer in #260
• Docs: CLAUDE.md pruned, changelog de-duplicated by @danrspencer in #261
• Zones view: coloured, filterable Activity; an All zones row; setup's FLARE label by @danrspencer in #262
• Overrides only count once they've lasted 30 seconds by @danrspencer in #263
• Activity: show each entry once when the card resubscribes by @danrspencer in #264
• Claim lights already showing the curve by @danrspencer in #265
• One place decides what a light shows (and whites reported in xy) by @danrspencer in #266
• Share reachability, flare-light and schedule-reading checks by @danrspencer in #267
• Blueprint: scene coverage from flare.compute_scene_coverage by @danrspencer in #268
• A room's lights by Home Assistant's own rule (flare.resolve_target) by @danrspencer in #269
• Blueprint: Zone is optional, to turn override protection off for a room by @danrspencer in #270
• Set up areas: a dropdown per area, and what to set up as a dropdown by @danrspencer in #271
• A zone restored dark lets go of its claims by @danrspencer in #272
• A sandbox Home Assistant to try FLARE in, through mise by @danrspencer in #273
• Setup: skip or set up, schedules by shape, areas by floor, and a dashboard that loads by @danrspencer in #274
• Recorded walkthroughs on the site and README, and an amber FLARE label by @danrspencer in #275
• Fail a shipped change under a released changelog version by @danrspencer in #276
• README: just the setup GIF by @danrspencer in #277
• The FLARE label uses FLARE's logo by @danrspencer in #278

Full Changelog: v0.16.0...v1.1.0-beta.2

v1.1.0-beta.1

What's Changed

• Automate releases: dev -> beta -> stable after a week by @danrspencer in #208
• Record claims before writing, and add flare.turn_off by @danrspencer in #209
• Group the code by concept, split init.py, drop the sys.path hack by @danrspencer in #207
• Version the blueprint with FLARE: its stamp is always the release version by @danrspencer in #210
• Comments describe the code as it is, not how it got here by @danrspencer in #211
• Drop config-entry migration and legacy owner-device cleanup by @danrspencer in #212
• Cut comments down to what a reader needs by @danrspencer in #213
• Split tests into unit, checks and functional; real schedule in behaviour tests by @danrspencer in #214
• Turn a room off only once every occupancy sensor has been clear for the Wait time by @danrspencer in #215
• Spread room updates across the minute, and skip changes too small to notice by @danrspencer in #216
• Rooms pick their zone explicitly by @danrspencer in #217
• Land the stacked PRs #218–#222 on main by @danrspencer in #223
• Docs: ordinary HA parts, an examples page, and Reference in place of Power users by @danrspencer in #224
• Changelog: move unreleased changes to 0.18.0 so betas cut again by @danrspencer in #225
• Warn about a light in two zones with a notification, not a repair by @danrspencer in #226
• Give the Schedule input a Details link, matching Zone by @danrspencer in #227
• Docs: defaults as defaults, no self-praise, each thing once by @danrspencer in #229
• Docs: Guides and Reference, and the second round of review by @danrspencer in #230
• Docs: plain technical writing, and the third round of review by @danrspencer in #231
• Blueprint: motion sensor support, and restructure its reference page by @danrspencer in #232
• CI: HACS action and hassfest validation by @danrspencer in #233
• Target 1.0.0 instead of 0.18.0 by @danrspencer in #234
• Add an Open in HACS button by @danrspencer in #236
• Docs: explain how latest is promoted to observed by @danrspencer in #237
• Docs: clean up the Services reference and services.yaml by @danrspencer in #238
• Docs: ban staccato prose, and lay the services page out like Home Assistant's by @danrspencer in #239
• Services take brightness levels, not multipliers by @danrspencer in #240
• A brightness of 0 is off, as it is for light.turn_on by @danrspencer in #241
• Route every override-protection check through one classify_state() by @danrspencer in #242
• Flares: a light over each room's automation, for HomeKit and voice assistants by @danrspencer in #243
• Docs: link each homepage claim to the docs behind it by @danrspencer in #244
• Docs: remove the links from the homepage's claims by @danrspencer in #245
• Docs: say when flare.claims_override is needed by @danrspencer in #246
• Docs: turning a flare on, in the remote example by @danrspencer in #247
• Ship the blueprint inside the integration by @danrspencer in #248
• Recognise the blueprint by name only by @danrspencer in #249
• Require Home Assistant 2026.10.0 through HACS by @danrspencer in #250
• Revert the Home Assistant 2026.10.0 minimum until it's out of beta by @danrspencer in #255
• Set up areas from the integration page by @danrspencer in #251
• Resend a command lost as a light comes back online, not an override by @danrspencer in #254
• Dashboard: a FLARE Lighting dashboard and a redesigned Zones view by @danrspencer in #252
• Docs: keep each release's docs, with the newest beta's beside them by @danrspencer in #256
• Zones: ticks as a plain event, and what a zone does in its Activity by @danrspencer in #253
• Docs: review pass over the recent pages by @danrspencer in #257
• Settling as a shared status, renamed entities, clearer setup messages by @danrspencer in #259
• Code tidy: compatibility code removed, two big files split by @danrspencer in #260
• Docs: CLAUDE.md pruned, changelog de-duplicated by @danrspencer in #261
• Zones view: coloured, filterable Activity; an All zones row; setup's FLARE label by @danrspencer in #262
• Overrides only count once they've lasted 30 seconds by @danrspencer in #263
• Activity: show each entry once when the card resubscribes by @danrspencer in #264
• Claim lights already showing the curve by @danrspencer in #265
• One place decides what a light shows (and whites reported in xy) by @danrspencer in #266
• Share reachability, flare-light and schedule-reading checks by @danrspencer in #267
• Blueprint: scene coverage from flare.compute_scene_coverage by @danrspencer in #268
• A room's lights by Home Assistant's own rule (flare.resolve_target) by @danrspencer in #269
• Blueprint: Zone is optional, to turn override protection off for a room by @danrspencer in #270
• Set up areas: a dropdown per area, and what to set up as a dropdown by @danrspencer in #271
• A zone restored dark lets go of its claims by @danrspencer in #272
• A sandbox Home Assistant to try FLARE in, through mise by @danrspencer in #273
• Setup: skip or set up, schedules by shape, areas by floor, and a dashboard that loads by @danrspencer in #274
• Recorded walkthroughs on the site and README, and an amber FLARE label by @danrspencer in #275
• Fail a shipped change under a released changelog version by @danrspencer in #276

Full Changelog: v0.16.0...v1.1.0-beta.1

v1.0.0

What's Changed

• Comments describe the code as it is, not how it got here by @danrspencer in #211
• Drop config-entry migration and legacy owner-device cleanup by @danrspencer in #212
• Cut comments down to what a reader needs by @danrspencer in #213
• Split tests into unit, checks and functional; real schedule in behaviour tests by @danrspencer in #214
• Turn a room off only once every occupancy sensor has been clear for the Wait time by @danrspencer in #215
• Spread room updates across the minute, and skip changes too small to notice by @danrspencer in #216
• Rooms pick their zone explicitly by @danrspencer in #217
• Land the stacked PRs #218–#222 on main by @danrspencer in #223
• Docs: ordinary HA parts, an examples page, and Reference in place of Power users by @danrspencer in #224
• Changelog: move unreleased changes to 0.18.0 so betas cut again by @danrspencer in #225
• Warn about a light in two zones with a notification, not a repair by @danrspencer in #226
• Give the Schedule input a Details link, matching Zone by @danrspencer in #227
• Docs: defaults as defaults, no self-praise, each thing once by @danrspencer in #229
• Docs: Guides and Reference, and the second round of review by @danrspencer in #230
• Docs: plain technical writing, and the third round of review by @danrspencer in #231
• Blueprint: motion sensor support, and restructure its reference page by @danrspencer in #232
• CI: HACS action and hassfest validation by @danrspencer in #233
• Target 1.0.0 instead of 0.18.0 by @danrspencer in #234
• Add an Open in HACS button by @danrspencer in #236
• Docs: explain how latest is promoted to observed by @danrspencer in #237
• Docs: clean up the Services reference and services.yaml by @danrspencer in #238
• Docs: ban staccato prose, and lay the services page out like Home Assistant's by @danrspencer in #239
• Services take brightness levels, not multipliers by @danrspencer in #240
• A brightness of 0 is off, as it is for light.turn_on by @danrspencer in #241
• Route every override-protection check through one classify_state() by @danrspencer in #242
• Flares: a light over each room's automation, for HomeKit and voice assistants by @danrspencer in #243
• Docs: link each homepage claim to the docs behind it by @danrspencer in #244
• Docs: remove the links from the homepage's claims by @danrspencer in #245
• Docs: say when flare.claims_override is needed by @danrspencer in #246
• Docs: turning a flare on, in the remote example by @danrspencer in #247
• Ship the blueprint inside the integration by @danrspencer in #248
• Recognise the blueprint by name only by @danrspencer in #249
• Require Home Assistant 2026.10.0 through HACS by @danrspencer in #250
• Revert the Home Assistant 2026.10.0 minimum until it's out of beta by @danrspencer in #255
• Set up areas from the integration page by @danrspencer in #251
• Resend a command lost as a light comes back online, not an override by @danrspencer in #254
• Dashboard: a FLARE Lighting dashboard and a redesigned Zones view by @danrspencer in #252
• Docs: keep each release's docs, with the newest beta's beside them by @danrspencer in #256
• Zones: ticks as a plain event, and what a zone does in its Activity by @danrspencer in #253
• Docs: review pass over the recent pages by @danrspencer in #257
• Settling as a shared status, renamed entities, clearer setup messages by @danrspencer in #259
• Code tidy: compatibility code removed, two big files split by @danrspencer in #260
• Docs: CLAUDE.md pruned, changelog de-duplicated by @danrspencer in #261
• Zones view: coloured, filterable Activity; an All zones row; setup's FLARE label by @danrspencer in #262
• Overrides only count once they've lasted 30 seconds by @danrspencer in #263
• Activity: show each entry once when the card resubscribes by @danrspencer in #264
• Claim lights already showing the curve by @danrspencer in #265
• One place decides what a light shows (and whites reported in xy) by @danrspencer in #266
• Share reachability, flare-light and schedule-reading checks by @danrspencer in #267
• Blueprint: scene coverage from flare.compute_scene_coverage by @danrspencer in #268
• A room's lights by Home Assistant's own rule (flare.resolve_target) by @danrspencer in #269
• Blueprint: Zone is optional, to turn override protection off for a room by @danrspencer in #270
• Set up areas: a dropdown per area, and what to set up as a dropdown by @danrspencer in #271

Full Changelog: v0.17.0...v1.0.0