Skip to content

Logic Analyser

Jump to bottom
Julian Decker edited this page Nov 8, 2026 · 2 revisions

Logic analyser

Models with an LA port work with the PLA2216 probe: lines D0 to D15, hardware trigger on the lines, decoders, roll and scan.

Logic analyser

Tap the LA card to switch it on and to choose the lines. Trigger and decoders can use the lines as a source: edge, pulse, pattern, duration and protocol trigger.

With the LA on the memory depth is limited to 31.25 M, 12.5 M or 10 M points for one, two or more channels.

Known limits

  • Thresholds are set as under stock, but have no effect on the unit tested, under stock neither.
  • Only D0 to D2 have been driven with a signal so far.
  • In 0.1.0, a protocol trigger in Normal freezes the picture in roll mode, and Single stops at the first edge. Both are fixed in 0.1.1.

OOS

Clone this wiki locally