TuttiCam v1.3

新增

• DJI 录像模式：DJI 相机在录像类模式（视频、全景视频、慢动作等）时，开始拍摄自动开始录像，停止拍摄时停止，期间不按单张快门；状态里显示还能录多久。
• DJI 休眠：外接相机页可以让 DJI 相机休眠省电；按相机上任意按键唤醒，醒来后自动重连。

改进

• 连上 DJI 相机后不再自动切到全景拍照，保留相机上选好的拍照或录像模式；延时、直播等其他模式仍会切到拍照。
• 改善连接多台外接相机时的稳定性：逐台连接，连接时暂停扫描，遇到蓝牙错误 133 自动重试；第三台起用均衡连接优先级。
• 开始页图标按安卓自适应图标规范放大。
• 已拍摄媒体的空状态在半屏时居中；重新安装 App 前拍的照片会提示到“文件”里查看。
• 设备页的保存位置链接直接打开系统“文件”App，不再先选应用。
• 外接相机统一用相机图标。

修复

• 开始会话时偶尔显示“相机出错（2）”，或预览正常却一直提示“没有就绪的设备”、无法拍摄。

安装

下载下方的 TuttiCam-v1.3.apk 覆盖安装，照片和设置都会保留。需要 Android 9 及以上。

---

New

• DJI video mode: when a DJI camera is in a video mode (video, panorama video, slow motion and more), recording starts when shooting starts and stops when shooting stops, with no single shots in between; the status shows how much recording time is left.
• DJI sleep: put a DJI camera to sleep from the External Cameras page to save battery; press any button on the camera to wake it, and it reconnects automatically.

Improvements

• Connecting to a DJI camera no longer switches it to panorama photo; the photo or video mode chosen on the camera is kept. Other modes such as timelapse or livestream are still switched to photo.
• Improved stability when connecting several external cameras: cameras connect one at a time, scanning pauses while connecting, and Bluetooth error 133 is retried automatically; from the third camera on, a balanced connection priority is used.
• The start screen icon is larger, following the Android adaptive icon guidelines.
• The Captured Media empty state is centered in the half-height sheet; photos taken before reinstalling the app point you to the Files app.
• The save folder link on the Devices page opens the system Files app directly, without asking which app to use.
• External cameras now all use a camera icon.

Fixes

• Starting a session sometimes showed “Camera error (2)”, or kept saying no device was ready even though the preview worked, so nothing was captured.

Install

Download TuttiCam-v1.3.apk below and install it over the old version; your photos and settings are kept. Requires Android 9 or later.

TuttiCam v1.2

新增

• 已拍摄媒体：设备页新增“已拍摄媒体”，按场景浏览本机照片，显示封面、张数、大小和时间。点进去看缩略图，再点全屏翻看，显示偏差、模糊和是否在动；底部进度条从这个场景的第一张拖到最后一张，快速翻看。可以分享、删除单张照片或整个场景。
• 打开保存文件夹：设备页最底下的 Documents/TuttiCam 可以点，直接在系统“文件”App 里打开。
• 从机问题提示：主机取景器上的提示会列出各从机的问题，如“A02：保存失败：…”，包括相机出错、保存失败、错过某组和没有回报。保存失败要从机也更新到 v1.2 才会报告。

改进

• 检查更新失败时显示 HTTP 状态码和原因，如“HTTP 403 · API rate limit exceeded”。
• 设备、外接相机、已拍摄媒体三页的左右边距和设置页对齐；卡片换成看得出边缘的底色，外接相机页的空状态和说明也放进卡片。

安装

下载下方的 TuttiCam-v1.2.apk 覆盖安装，照片和设置都会保留。需要 Android 9 及以上。

---

New

• Captured Media: the Devices page now has Captured Media, which lists this phone's photos by scene with a cover, photo count, size and time. Open a scene for thumbnails, then a photo to view it full screen with offset, blur and moving status; drag the bar at the bottom to scrub from the scene's first photo to its last. Share or delete single photos or whole scenes.
• Open the save folder: tap Documents/TuttiCam at the bottom of the Devices page to open it in the system Files app.
• Client problems on the host: the hints on the host's viewfinder now list each client's problems, such as “A02: Save failed: …”, including camera errors, save failures, missed rounds and missing reports. Save failures are reported only when the client is also on v1.2.

Improvements

• When the update check fails, the HTTP status code and reason are shown, such as “HTTP 403 · API rate limit exceeded”.
• The Devices, External Cameras and Captured Media pages now use the same side margins as Settings; cards have a background that shows their edges, and the empty states on External Cameras sit in cards too.

Install

Download TuttiCam-v1.2.apk below and install it over the old version; your photos and settings are kept. Requires Android 9 or later.

TuttiCam v1.1

新增

• 检查更新：关于页新增“检查更新”，查询 GitHub 上的最新正式版，有新版本时可直接打开下载页。只在点按时联网，不附带设备或照片信息。
• 源代码和官网：关于页新增 GitHub 源代码（GPL-3.0）和官网 tutticam.com 的链接。

改进

• 遥控模式中央的“最小间隔”菜单改为从右侧数值处展开，并标出当前选中的间隔。
• 精简关于页里外接相机协议来源的说明。

修复

• 关于页的商标声明里，App 名称显示成了“%1$s”。

安装

下载下方的 TuttiCam-v1.1.apk 覆盖安装，照片和设置都会保留。需要 Android 9 及以上。

---

New

• Check for updates: the About page can now check GitHub for the latest release and open the download page when a new version is out. It only goes online when you tap, and sends no device or photo information.
• Source code and website: the About page now links to the source code on GitHub (GPL-3.0) and to tutticam.com.

Improvements

• In remote mode, the Minimum Interval menu now opens from the value on the right and marks the current choice.
• Shorter notes on the sources of external camera protocols in About.

Fixes

• The trademark notice in About showed “%1$s” instead of the app name.

Install

Download TuttiCam-v1.1.apk below and install it over the old version; your photos and settings are kept. Requires Android 9 or later.

TuttiCam v1.0

齐拍即合 TuttiCam 安卓版的第一个正式版。它是 iOS 版的原生移植，可以和 iPhone 在同一个会话里同步拍摄。

功能

• 多机同步拍摄：一台当主机，其余当从机；同一 Wi‑Fi 或热点下自动发现，一个会话最多 8 台。安卓和 iPhone 可以混拍，两边都能当主机。
• 遥控模式：本机不开相机，只给从机和外接相机按快门；画面中央可直接调静止判定和最小间隔。
• 精确对时、按时刻取帧：NTP 式对时；从连续画面里取曝光时刻离约定时刻最近的一帧，并把偏差回报给主机。
• 静止判定：三脚架、手持、不判定三种模式，可只看主机；可选强制照片同步。
• 手动参数：快门、ISO、白平衡、色调、曝光补偿、对焦，可锁定全部参数。
• 多镜头：单镜头按实际倍率切换（如 0.6x、1x、3x、前置）；支持的机型可以两颗镜头同时拍。
• 照片格式：JPEG、HEIC、RAW（DNG）、RAW + JPEG。
• 照片信息：EXIF 和 GPS，可选的拍摄姿态（XMP）和同名 JSON；文件命名与 iOS 版相同，方便混合重建。
• 场景文件夹：新建、重命名、切换场景，各设备同步。
• 外接相机：通过蓝牙给 DJI、索尼、佳能、富士、尼康、理光、GoPro 相机按快门。
• 语言：简体中文、English、日本語，可在设置里单独切换。

已知限制

• 和 iPhone 混拍需要连同一个 Wi‑Fi 或热点；不连网络的点对点连接还没有做。
• 已实测机型：三星 Galaxy S24（Android 16）。

安装

下载下方的 TuttiCam-v1.0.apk 安装，需要 Android 9 及以上，并允许“安装未知应用”。

---

The first release of TuttiCam for Android, a native port of the iOS app. It can shoot in sync with iPhones in the same session.

Features

• Synchronized multi-phone capture: one phone hosts, the others join; devices on the same Wi‑Fi or hotspot find each other automatically, up to 8 per session. Android phones and iPhones can shoot together, and either can host.
• Remote mode: the phone keeps its camera off and only fires clients and external cameras; stillness detection and minimum interval are adjustable right on screen.
• Precise clock sync, frames picked by time: NTP-style clock sync; the frame whose exposure is closest to the agreed moment is kept, and the offset is reported to the host.
• Stillness detection: tripod, handheld and off modes, optionally checking the host only; optional forced photo sync.
• Manual controls: shutter, ISO, white balance, tint, exposure compensation and focus, with a lock for all parameters.
• Multi-lens: switch lenses by their real zoom (such as 0.6x, 1x, 3x, Front); supported phones can shoot with two lenses at once.
• Photo formats: JPEG, HEIC, RAW (DNG), RAW + JPEG.
• Photo metadata: EXIF and GPS, optional camera attitude (XMP) and per-photo JSON; file names match the iOS app for mixed reconstruction.
• Scene folders: create, rename and switch scenes, synced across devices.
• External cameras: fire DJI, Sony, Canon, Fujifilm, Nikon, Ricoh and GoPro cameras over Bluetooth.
• Languages: Simplified Chinese, English and Japanese, switchable in Settings.

Known Limitations

• Shooting with iPhones needs the same Wi‑Fi or hotspot; peer-to-peer connection without a network is not available yet.
• Tested on: Samsung Galaxy S24 (Android 16).

Install

Download TuttiCam-v1.0.apk below. Requires Android 9 or later and permission to install unknown apps.