dpx-buttnode v0.5.0 — Buttons 0.1.0-beta.4

Bitfocus Buttons USB Relay 0.1.0-beta.4 — Pipeline v0.5.0

Flash-ready Armbian images with Bitfocus Buttons USB Relay (headless) and Companion Satellite pre-installed. Switch between modes from the browser — no re-flash needed.

Component	Version
dpx-buttnode pipeline	0.5.0
Buttons USB Relay	0.1.0-beta.4
Companion Satellite	unknown
Built from	main@fee75d6

Boards included

• orangepizero3 — orangepizero3-dpx-buttnode-0.5.0-main-fee75d6.img.gz
• rockpi-s — rockpi-s-dpx-buttnode-0.5.0-main-fee75d6.img.gz

Flash it

# macOS / Linux
gunzip -c <image>.img.gz | sudo dd of=/dev/sdX bs=4M status=progress

Or use Balena Etcher — it reads .gz directly, no extraction needed.

First boot

1. Insert SD card, connect Stream Deck via USB, power on
2. bitfocus-buttons-usb-relay starts automatically and announces itself via mDNS on port 3040
3. Open Bitfocus Buttons — relay appears under discovered devices automatically

Recommended accessories

• Rock Pi S PoE HAT — power + network over a single ethernet cable, no power brick needed
• ecoPI S housing — enclosure designed for Rock Pi S

Troubleshoot (SSH in)

systemctl status bitfocus-buttons-usb-relay
journalctl -u bitfocus-buttons-usb-relay -f

dpx-buttnode v0.5.0 — Buttons 0.1.0-beta.4

Bitfocus Buttons USB Relay 0.1.0-beta.4 — Pipeline v0.5.0

Flash-ready Armbian images with Bitfocus Buttons USB Relay (headless) and Companion Satellite pre-installed. Switch between modes from the browser — no re-flash needed.

Component	Version
dpx-buttnode pipeline	0.5.0
Buttons USB Relay	0.1.0-beta.4
Companion Satellite	unknown
Built from	main@a547714

Boards included

• orangepizero3 — orangepizero3-dpx-buttnode-0.5.0-main-a547714.img.gz
• rockpi-s — rockpi-s-dpx-buttnode-0.5.0-main-a547714.img.gz

Flash it

# macOS / Linux
gunzip -c <image>.img.gz | sudo dd of=/dev/sdX bs=4M status=progress

Or use Balena Etcher — it reads .gz directly, no extraction needed.

First boot

1. Insert SD card, connect Stream Deck via USB, power on
2. bitfocus-buttons-usb-relay starts automatically and announces itself via mDNS on port 3040
3. Open Bitfocus Buttons — relay appears under discovered devices automatically

Recommended accessories

• Rock Pi S PoE HAT — power + network over a single ethernet cable, no power brick needed
• ecoPI S housing — enclosure designed for Rock Pi S

Troubleshoot (SSH in)

systemctl status bitfocus-buttons-usb-relay
journalctl -u bitfocus-buttons-usb-relay -f

Buttons USB Relay 0.1.0-beta.4 (build 0.4.0)

Bitfocus Buttons USB Relay 0.1.0-beta.4 — Pipeline v0.4.0

Flash-ready Armbian images with Bitfocus Buttons USB Relay (headless) pre-installed.
Plug in your Stream Deck, power on — the relay is already running.

Boards included

• orangepizero3 — orangepizero3-buttons-usb-relay-0.1.0-beta.4-build0.4.0.img.gz
• rockpi-s — rockpi-s-buttons-usb-relay-0.1.0-beta.4-build0.4.0.img.gz

Flash it

# macOS / Linux
gunzip -c <image>.img.gz | sudo dd of=/dev/sdX bs=4M status=progress

Or use Balena Etcher — it reads .gz directly, no extraction needed.

First boot

1. Insert SD card, connect Stream Deck via USB, power on
2. bitfocus-buttons-usb-relay starts automatically and announces itself via mDNS on port 3040
3. Open Bitfocus Buttons — relay appears under discovered devices automatically

Recommended accessories

• Rock Pi S PoE HAT — power + network over a single ethernet cable, no power brick needed
• ecoPI S housing — enclosure designed for Rock Pi S

Troubleshoot (SSH in)

systemctl status bitfocus-buttons-usb-relay
journalctl -u bitfocus-buttons-usb-relay -f

Buttons USB Relay 0.1.0-beta.4 (build 0.3.1)

Bitfocus Buttons USB Relay 0.1.0-beta.4 — Pipeline v0.3.1

Flash-ready Armbian images with Bitfocus Buttons USB Relay (headless) pre-installed.
Plug in your Stream Deck, power on — the relay is already running.

Boards included

• orangepizero3 — orangepizero3-buttons-usb-relay-0.1.0-beta.4-build0.3.1.img.gz
• rockpi-s — rockpi-s-buttons-usb-relay-0.1.0-beta.4-build0.3.1.img.gz

Flash it

# macOS / Linux
gunzip -c <image>.img.gz | sudo dd of=/dev/sdX bs=4M status=progress

Or use Balena Etcher — it reads .gz directly, no extraction needed.

First boot

1. Insert SD card, connect Stream Deck via USB, power on
2. bitfocus-buttons-usb-relay starts automatically and announces itself via mDNS on port 3040
3. Open Bitfocus Buttons — relay appears under discovered devices automatically

Recommended accessories

• Rock Pi S PoE HAT — power + network over a single ethernet cable, no power brick needed
• ecoPI S housing — enclosure designed for Rock Pi S

Troubleshoot (SSH in)

systemctl status bitfocus-buttons-usb-relay
journalctl -u bitfocus-buttons-usb-relay -f

rockpi-s-buttons-usb-relay-0.1.0-beta.4_build0-.1.0

works -
default ssh is root/1234 in case you need ?
rather like to close this out later if possible

Buttons USB Relay — Package Mirror

Maintained mirror of the Bitfocus Buttons USB Relay ARM64 package.
Do not delete this release — it is used by the automated build pipeline.

To update: run scripts/upload-mirror.sh <new-tarball.tar.gz>