Splinter 65 v1.0.0

First release.

Cut files for both plates, built from the sources in this tag.

	base	guard
thickness	1.0 mm	1.5 mm
envelope	54.8 x 54.8 mm	82.8 x 82.8 mm
mass, calculated	0.97 g	2.12 g

Send the DXF to the shop and import at 1:1 scale. OpenSCAD's DXF export carries no unit metadata, so check the envelope measures what the table says before ordering. The STEP files are the same parts as solids.

Fibre orientation matters more than anything else you can specify: the 0/90 directions must run parallel to the motor arms. Parts may be flipped when nesting, but not rotated.

Read the safety notes in the README before cutting or flying. Carbon is conductive and the dust is hazardous.