W5500 version mismatched (TZ-1442)

[orangeagain]

Checklist

• Checked the issue tracker for similar issues to ensure this is not a duplicate
• Read the documentation to confirm the issue is not addressed there and your configuration is set correctly
• Tested with the latest version to ensure the issue hasn't been fixed

How often does this bug occurs?

always

Expected behavior

run latest demo error,when use eth net, use offical devboard

Actual behavior (suspected bug)

W5500 version mismatched, expected 0x04, got 0
x0hx

Error logs or terminal output

w5500.mac: W5500 version mismatched, expected 0x04, got 0
x0hx
E (526) w5500.mac: emac_w5500_init(826): verify chip ID failed     
I (526) gpio: GPIO[4]| InputEn: 0| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:0
E (526) esp_eth: esp_eth_driver_install(228): init mac failed      
ESP_ERROR_CHECK failed: esp_err_t 0x10a (ESP_ERR_INVALID_VERSION) at 0x4201b057
--- 0x4201b057: eth_start at D:/Espressif7/frameworks/esp-idf-v5.3.2/examples/common_components/protocol_examples_common/eth_connect.c:154 (discriminator 1)
 (inlined by) example_ethernet_connect at D:/Espressif7/frameworks/esp-idf-v5.3.2/examples/common_components/protocol_examples_common/eth_connect.c:232 (discriminator 1)

file: "/IDF/examples/common_components/protocol_examples_common/eth_connect.c" line 154
func: eth_start
expression: esp_eth_driver_install(&config, &s_eth_handle)

abort() was called at PC 0x4037c797 on core 0
.--- 0x4037c797: _esp_error_check_failed at D:/Espressif7/frameworks/esp-idf-v5.3.2/components/esp_system/esp_err.c:49



Backtrace: 0x40375b0a:0x3fcb6930 0x4037c7a1:0x3fcb6950 0x40383666:0x3fcb6970 0x4037c797:0x3fcb69e0 0x4201b057:0x3fcb6a10 0x4201aadb:0x3fcb6b30
.--- 0x40375b0a: panic_abort at D:/Espressif7/frameworks/esp-idf-v5.3.2/components/esp_system/panic.c:463
0x4037c7a1: esp_system_abort at D:/Espressif7/frameworks/esp-idf-v5.3.2/components/esp_system/port/esp_system_chip.c:92
0x40383666: abort at D:/Espressif7/frameworks/esp-idf-v5.3.2/components/newlib/abort.c:38
0x4037c797: _esp_error_check_failed at D:/Espressif7/frameworks/esp-idf-v5.3.2/components/esp_system/esp_err.c:49
0x4201b057: eth_start at D:/Espressif7/frameworks/esp-idf-v5.3.2/examples/common_components/protocol_examples_common/eth_connect.c:154 (discriminator 1)
 (inlined by) example_ethernet_connect at D:/Espressif7/frameworks/esp-idf-v5.3.2/examples/common_components/protocol_examples_common/eth_connect.c:232 (discriminator 1)
0x4201aadb: ot_br_init at D:/DanPianJi/test/esp-thread-br-main/examples/common/thread_border_router/src/border_router_launch.c:134

Steps to reproduce the behavior

Enable EXAMPLE_CONNECT_ETHERNET
Disable EXAMPLE_CONNECT_WIFI

Project release version

latest

System architecture

Intel/AMD 64-bit (modern PC, older Mac)

Operating system

Windows

Operating system version

Windows 10

Shell

PowerShell

Additional context

Use Defult hardware setting like this:

[zwx1995esp]

Hi, @orangeagain From the logs you shared, I guess you used the tag v5.3.2 for the IDF branch. And I tried the IDF tag v5.3.2 with the latest esp-thread-br commit 1ce0e17792639dd50e145861f559009473f93ac7 no such issues on my side. Could you please clean your env and have a try again?

[orangeagain]

换了两块板了，问题依旧存在。
复现步骤：下载最新项目后仅修改三处:
Enable EXAMPLE_CONNECT_ETHERNET
Disable EXAMPLE_CONNECT_WIFI
Enable CONFIG_OPENTHREAD_BR_AUTO_START
后编译上传，插网线，口亮绿灯。
启动报错:

I (26) boot: ESP-IDF v5.3.2-dirty 2nd stage bootloaderI (26) boot: compile time Jan 25 2025 05:58:39        
I (26) boot: Multicore bootloader
I (27) boot: chip revision: v0.2
I (27) boot: efuse block revision: v1.3
I (27) boot.esp32s3: Boot SPI Speed : 80MHz
I (27) boot.esp32s3: SPI Mode       : DIO
I (27) boot.esp32s3: SPI Flash Size : 4MB
I (28) boot: Enabling RNG early entropy source...     
I (28) boot: Partition Table:
I (28) boot: ## Label            Usage          Type ST Offset   Length
I (28) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (29) boot:  1 otadata          OTA data         01 00 0000f000 00002000
I (29) boot:  2 phy_init         RF data          01 01 00011000 00001000
I (30) boot:  3 ota_0            OTA app          00 10 00020000 00190000
I (30) boot:  4 ota_1            OTA app          00 11 001b0000 00190000
I (30) boot:  5 web_storage      Unknown data     01 82 00340000 00019000
I (31) boot:  6 rcp_fw           Unknown data     01 82 00359000 000a0000
I (31) boot: End of partition table
I (32) esp_image: segment 0: paddr=00020020 vaddr=3c0c0020 size=43fa8h (278440) map
I (81) esp_image: segment 1: paddr=00063fd0 vaddr=3fc95400 size=0327ch ( 12924) load
I (84) esp_image: segment 2: paddr=00067254 vaddr=40374000 size=08dc4h ( 36292) load
I (92) esp_image: segment 3: paddr=00070020 vaddr=42000020 size=bd7fch (776188) map
I (230) esp_image: segment 4: paddr=0012d824 vaddr=4037cdc4 size=0861ch ( 34332) load
I (244) boot: Loaded app from partition at offset 0x20000
I (245) boot: Disabling RNG early entropy source...   
I (246) cpu_start: Multicore app
I (255) cpu_start: Pro cpu start user code
I (255) cpu_start: cpu freq: 160000000 Hz
I (255) app_init: Application information:
I (255) app_init: Project name:     esp_ot_br
I (255) app_init: App version:      1
I (255) app_init: Compile time:     Jan 25 2025 05:58:23
I (256) app_init: ELF file SHA256:  4c15036ff...      
I (256) app_init: ESP-IDF:          v5.3.2-dirty
I (256) efuse_init: Min chip rev:     v0.0
I (256) efuse_init: Max chip rev:     v0.99 
I (256) efuse_init: Chip rev:         v0.2
I (256) heap_init: Initializing. RAM available for dynamic allocation:
I (257) heap_init: At 3FCA4C08 len 00044B08 (274 KiB): RAM
I (257) heap_init: At 3FCE9710 len 00005724 (21 KiB): 
RAM
I (257) heap_init: At 3FCF0000 len 00008000 (32 KiB): 
DRAM
I (258) heap_init: At 600FE100 len 00001EE8 (7 KiB): RTCRAM
I (259) spi_flash: detected chip: gd
I (259) spi_flash: flash io: dio
W (259) spi_flash: Detected size(8192k) larger than the size in the binary image header(4096k). Using the size in the binary image header.
I (260) sleep: Configure to isolate all GPIO pins in sleep state
I (261) sleep: Enable automatic switching of GPIO sleep configuration
I (261) main_task: Started on CPU0
I (271) main_task: Calling app_main()
I (321) RCP_UPDATE: RCP: using update sequence 0      
I (321) uart: ESP_INTR_FLAG_IRAM flag not set while CONFIG_UART_ISR_IN_IRAM is enabled, flag updated        
I (321) OPENTHREAD: spinel UART interface initialization completed
I (321) main_task: Returned from app_main()
I(321) OPENTHREAD:[I] P-SpinelDrive-: co-processor reset: RESET_POWER_ON
E(331) OPENTHREAD:[C] P-SpinelDrive-: Software reset co-processor successfully
I(371) OPENTHREAD:[I] CslTxScheduler: Bus TX Time: 0 usec, Latency: 0 usec. Calculated CSL Frame Request Ahead: 20000 usec
I(371) OPENTHREAD:[I] ChildSupervsn-: Timeout: 0 -> 190
I(381) OPENTHREAD:[I] Settings------: Read NetworkInfo {rloc:0xf800, extaddr:ae568904df7031b0, role:leader, 
mode:0x0f, version:5, keyseq:0x0, ...
I(391) OPENTHREAD:[I] Settings------: ... pid:0x5dc119d7, mlecntr:0x2208e, maccntr:0x1e472, mliid:96864d470197a2fd}
I (401) esp_ot_br: Internal RCP Version: openthread-esp32/9d7f2d69f5-005c5ce; esp32h2;  2025-01-04 07:59:28 
UTC
I (401) esp_ot_br: Running  RCP Version: openthread-esp32/9d7f2d69f5-005c5ce; esp32h2;  2025-01-04 07:59:28 
UTC
n (401) OPENTHREAD: OpenThread attached to netif      
 > E (501) w5500.mac: W5500 version mismatched, expecte
d 0x04, got 0x0hx
E (501) w5500.mac: emac_w5500_init(826): verify chip ID failed
I (501) gpio: GPIO[4]| InputEn: 0| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:0
E (501) esp_eth: esp_eth_driver_install(228): init mac failed
ESP_ERROR_CHECK failed: esp_err_t 0x10a (ESP_ERR_INVALID_VERSION) at 0x42014edf
--- 0x42014edf: eth_start at F:/Espressif5/frameworks/esp-idf-v5.3.2/examples/common_components/protocol_examples_common/eth_connect.c:154 (discriminator 1)      
 (inlined by) example_ethernet_connect at F:/Espressif5/frameworks/esp-idf-v5.3.2/examples/common_components/protocol_examples_common/eth_connect.c:232 (discriminator 1)

file: "/IDF/examples/common_components/protocol_examples_common/eth_connect.c" line 154
func: eth_start
expression: esp_eth_driver_install(&config, &s_eth_handle)

abort() was called at PC 0x4037c77f on core 0
--- 0x4037c77f: _esp_error_check_failed at F:/Espressif5/frameworks/esp-idf-v5.3.2/components/esp_system/esp_err.c:49



Backtrace: 0x40375af2:0x3fcb4dc0 0x4037c789:0x3fcb4de0 0x40383546:0x3fcb4e00 0x4037c77f:0x3fcb4e70 0x42014edf:0x3fcb4ea0 0x42014963:0x3fcb4fc0
--- 0x40375af2: panic_abort at F:/Espressif5/frameworks/esp-idf-v5.3.2/components/esp_system/panic.c:463    
0x4037c789: esp_system_abort at F:/Espressif5/frameworks/esp-idf-v5.3.2/components/esp_system/port/esp_system_chip.c:92
0x40383546: abort at F:/Espressif5/frameworks/esp-idf-v5.3.2/components/newlib/abort.c:38
0x4037c77f: _esp_error_check_failed at F:/Espressif5/frameworks/esp-idf-v5.3.2/components/esp_system/esp_err.c:49
0x42014edf: eth_start at F:/Espressif5/frameworks/esp-idf-v5.3.2/examples/common_components/protocol_examples_common/eth_connect.c:154 (discriminator 1)
 (inlined by) example_ethernet_connect at F:/Espressif5/frameworks/esp-idf-v5.3.2/examples/common_components/protocol_examples_common/eth_connect.c:232 (discriminator 1)
0x42014963: ot_br_init at F:/IDFProjects/esp-thread-br-main277-2/esp-thread-br-main/examples/common/thread_border_router/src/border_router_launch.c:134





ELF file SHA256: 4c15036ff

Rebooting...

[orangeagain]

解决了，漏掉了如下设置:

Espressif IoT Development Framework Configuration
[ ] connect using WiFi interface
[*] connect using Ethernet interface
(2048)  emac_rx task stack size
      Ethernet Type (W5500 Module)  --->
(2)     SPI Host Number
(21)    SPI SCLK GPIO number
(45)    SPI MOSI GPIO number
(38)    SPI MISO GPIO number
(41)    SPI CS GPIO number
(36)    SPI clock speed (MHz)
(39)    Interrupt GPIO number
(40)    PHY Reset GPIO number
(1)     PHY Address
[*] Obtain IPv6 address
     Preferred IPv6 Type (Local Link Address)  --->