v0.6.3

The battle race and the pace panel, fixed from a real battle, and Done in Arrange counting every change.

Added

• The race says when its rival lines stopped. If your clans list stops keeping clan names, the rival lines
  on the race freeze while yours goes on. The race now says so under the chart, with the time they stopped and
  why, and when Ur Score has a newer copy of the list that keeps names, where to get it: Setup › Recipes,
  Update. Updating a recipe is still up to you; nothing updates on its own.

Changed

• A battle race takes one clan. With a clans list switched on, the race brings your rivals in by itself, so
  one clan of yours is a whole race. It used to ask for two; it now takes 1 to 5.
• Clan pace offers only what can have a pace. Its settings used to offer sources with no clan and no battle,
  such as a Pet Sim 99 profile, which could only draw an empty panel. It now offers clans whose recipe has a
  total and a battle.
• Ur Score is open source, under the Apache License 2.0: LICENSE and NOTICE are in the repository.
  Releases before 0.6.3 stay under the license they shipped with.

Fixed

• Done (n) counts every change. In Arrange, the count on Done stopped at 20, and Ctrl+Z couldn't step
  back further than 20 changes. Both now reach all the way back to where you started arranging. Undo outside
  Arrange still keeps the last 20 steps.
• The race only says its rival lines stopped when it draws some. With no rival lines on the chart, the
  sentence spoke of lines you couldn't see.
• The Race card in Add panel says why it's off. It said "Add a clan in Setup first." even with clans already
  there; when their recipe has no total, it now says it needs a clan whose recipe has one.

How to install

• In RoRoRo: Plugins, where the marketplace offers Ur Score 0.6.3.
• By hand: download plugin.zip, manifest.sha256 and install.ps1 below into one folder, quit RoRoRo and Ur Score, then right-click install.ps1 › Run with PowerShell. Or unzip plugin.zip into %LOCALAPPDATA%\ROROROblox\plugins\626labs.ur-score\ yourself. Details: Install by hand.

Your recipes, clans, boards and score book live in %LOCALAPPDATA%\626labs.ur-score\ and are never touched by an install. The full history is in CHANGELOG.md.

What's Changed

• chore(license): Apache-2.0, © 626Labs LLC by @estevanhernandez-stack-ed in #42
• fix(board): a race of one clan, pace only where there is one, and a race that says when its rivals stopped by @estevanhernandez-stack-ed in #43
• Release 0.6.3: a race of one clan, pace only where it fits, rival lines that say when they froze by @estevanhernandez-stack-ed in #44

Full Changelog: v0.6.2...v0.6.3

v0.6.2

The board's top bar, editing and undo, reworked now that testing is done. 0.5.10, 0.6.0 and 0.6.1 were never
released on their own; everything since 0.5.9 is here.

Added

• A status chip in the top bar. ▶ Start reading starts a board that hasn't read this session; once it has,
  the chip shows status: ● Live, ❚❚ Paused (amber) or ▲ Trouble. It never pauses by itself.
• A status card. Click the chip and a card opens: the state line, one line per switched-on source (when it
  last read and when it reads next, or its trouble), whether phone alerts are going out, and Pause reading /
  Resume reading. Esc or a click elsewhere closes it; opening it never pauses.
• ⟳ and F5 read every source now, paused or not. F5 isn't taken by a popped-out panel, which has no ⟳.
• "(Paused)" in the window title while reading is paused, so a paused board shows on the taskbar or a second
  screen without hovering over anything.
• Arrange gets Cancel and Esc. With nothing changed either just leaves; with a change, a themed window asks
  first, naming the board. Done counts the changes it will save ("Done (3)"), and shows no count once the
  draft is back as it was. The panel a keyboard is moving shows a cyan focus ring.
• Undo, per board. Ctrl+Z takes back moving, resizing, adding, removing and changing (Settings) a panel,
  the last 20 steps for the session. Outside Arrange each change is its own step; while arranging, Ctrl+Z steps
  back through the draft and Done folds the whole arrangement into one step, "Arranged Battle". A themed toast
  at the bottom of the board names the change and offers Undo for about six seconds, while arranging too (there
  its Undo steps back through the draft); entering Arrange hides a toast from before, and Cancel hides the draft's,
  and so does Done when arranging ends without saving a change. Undo never takes back a rename. A starter tab
  re-follows your clans again if the board an undo restores still matches what the starter draws; otherwise the
  toast says so. Pop-outs are never undone, and deleting a board clears its history.

Changed

• Reading starts on open, by default. New installs and existing ones alike; existing installs are switched on
  once, and a player who unticks it keeps it off from then on. Turn it off in Setup › Recipes, under Start
  reading when Ur Score opens. It is asked again when Setup closes and when the first source is switched on, for
  a board that hasn't started yet.
• Start/Stop and Test now became the status chip and ⟳. Pause moved into the status card.
• Closing Ur Score asks only while it is reading and sending. A paused or never-started board closes without
  asking.
• Edit board is Arrange. Panels keep their height going in and out: the drag handle, ✕ and a dashed outline
  are drawn inside the panel's own header instead of adding a row above it. The tabs stay clickable while
  arranging (+ Board and the tab menu are off until Done or Cancel): a tab click saves the draft first, the
  same way Done does, then switches, and a save that fails keeps you on the board and says why, in the banner.

Fixed

• Test now read nothing after Stop. Pressing it on a stopped board did nothing until reading was started
  again; ⟳ and F5 read while paused now.
• A tall panel stays tall when you let go of its corner. Dragging the corner of a two-row panel and letting go
  at the height it had made it one row; it is measured against one row now.
• Moving a panel with the keyboard keeps going. After the first Left or Right, focus fell out of the board and
  the next key moved nothing. It stays on the moved panel.
• Popped-out panels show no resize grips, since their slot can't be resized.
• ✕ says which panel it removes, for screen readers.

How to install

• In RoRoRo: Plugins, where the marketplace offers Ur Score 0.6.2.
• By hand: download plugin.zip, manifest.sha256 and install.ps1 below into one folder, quit RoRoRo and Ur Score, then right-click install.ps1 › Run with PowerShell. Or unzip plugin.zip into %LOCALAPPDATA%\ROROROblox\plugins\626labs.ur-score\ yourself. Details: Install by hand.

Your recipes, clans, boards and score book live in %LOCALAPPDATA%\626labs.ur-score\ and are never touched by an install. The full history is in CHANGELOG.md.

What's Changed

• Release docs: a runbook, and release pages from the CHANGELOG by @estevanhernandez-stack-ed in #39
• Release workflow: read the tag as data, not as script source by @estevanhernandez-stack-ed in #40
• Board chrome: a status chip, reading on open, Arrange, and undo (0.6.2) by @estevanhernandez-stack-ed in #41

Full Changelog: v0.5.9...v0.6.2

v0.5.9

Added

• Install by hand. Every release now carries install.ps1 beside plugin.zip: right-click › Run with
  PowerShell checks the zip against its checksum, refuses while RoRoRo or Ur Score is running, moves the old
  install aside, and installs where RoRoRo looks. The README's new Install by hand section also gives the
  fully manual route. The same script ships with every RoRoRo plugin.

How to install

• In RoRoRo: Plugins, where the marketplace offers Ur Score 0.5.9.
• By hand: download plugin.zip, manifest.sha256 and install.ps1 below into one folder, quit RoRoRo and Ur Score, then right-click install.ps1 › Run with PowerShell. Or unzip plugin.zip into %LOCALAPPDATA%\ROROROblox\plugins\626labs.ur-score\ yourself. Details: Install by hand.

Your recipes, clans, boards and score book live in %LOCALAPPDATA%\626labs.ur-score\ and are never touched by an install. The full history is in CHANGELOG.md.

---

What's Changed

• Install by hand: install.ps1 in every release, and a README section by @estevanhernandez-stack-ed in #38

Full Changelog: v0.5.8...v0.5.9

v0.5.8

Added

• Closing Ur Score asks while it is sending. Closing the board ends Ur Score, and with it the reads,
  the score book and every report to RoRoRo, so your phone alerts stop. While a send tick or field metric
  is on, closing now asks first; Keep running is the default, so Enter or Esc keeps it open. With
  nothing sending it closes as before, and a Windows shutdown or sign-out never asks.

How to install

• In RoRoRo: Plugins, where the marketplace offers Ur Score 0.5.8.
• By hand: download plugin.zip, manifest.sha256 and install.ps1 below into one folder, quit RoRoRo and Ur Score, then right-click install.ps1 › Run with PowerShell. Or unzip plugin.zip into %LOCALAPPDATA%\ROROROblox\plugins\626labs.ur-score\ yourself. Details: Install by hand.

Your recipes, clans, boards and score book live in %LOCALAPPDATA%\626labs.ur-score\ and are never touched by an install. The full history is in CHANGELOG.md.

---

What's Changed

• Closing Ur Score asks while something is sending by @estevanhernandez-stack-ed in #37

Full Changelog: v0.5.7...v0.5.8

v0.5.7

Fixed

• The import preview names every clan. A profile or clans-list source showed its recipe's slug
  (pet-sim-99-profile); it now shows the recipe's name.
• The import's stats line counts battles apart. "Imported 2,054 readings and 62 finished battles",
  as the preview counts them, instead of adding the battles to the readings.
• Promotion check keeps the other clan's lowest. When your clan's read brought nothing back, the
  panel hid the other clan's lowest as well; it is still true, so it now shows beside the note.

How to install

• In RoRoRo: Plugins, where the marketplace offers Ur Score 0.5.7.
• By hand: download plugin.zip, manifest.sha256 and install.ps1 below into one folder, quit RoRoRo and Ur Score, then right-click install.ps1 › Run with PowerShell. Or unzip plugin.zip into %LOCALAPPDATA%\ROROROblox\plugins\626labs.ur-score\ yourself. Details: Install by hand.

Your recipes, clans, boards and score book live in %LOCALAPPDATA%\626labs.ur-score\ and are never touched by an install. The full history is in CHANGELOG.md.

---

What's Changed

• Import preview names, the stats count, and the promotion check's lowest by @estevanhernandez-stack-ed in #36

Full Changelog: v0.5.6...v0.5.7

v0.5.6

Added

• Your setup travels with your stats. Export stats now carries your recipes with their ticks, your
  clans, your boards and two settings, applied whatever you tick (Start on open stays this PC's own), and
  Import stats shows you what will change — added, updated,
  replaced, kept — with a tick on each, before anything is written. Keys never travel (the file names
  the ones to enter again). Nothing arrives set to send: every send tick is off until you tick it on
  the new PC, so a file from elsewhere can never start reports on its own. Your previous setup is copied
  aside, dated, before the import. A 0.5.5 stats file still imports.

How to install

• In RoRoRo: Plugins, where the marketplace offers Ur Score 0.5.6.
• By hand: download plugin.zip, manifest.sha256 and install.ps1 below into one folder, quit RoRoRo and Ur Score, then right-click install.ps1 › Run with PowerShell. Or unzip plugin.zip into %LOCALAPPDATA%\ROROROblox\plugins\626labs.ur-score\ yourself. Details: Install by hand.

Your recipes, clans, boards and score book live in %LOCALAPPDATA%\626labs.ur-score\ and are never touched by an install. The full history is in CHANGELOG.md.

---

What's Changed

• The setup travels with the stats — merged behind a preview with ticks; sends arrive off by @estevanhernandez-stack-ed in #35

Full Changelog: v0.5.5...v0.5.6

v0.5.5

Added

• Export stats and Import stats. Setup > Score book writes your score book to one dated file, and
  reads such a file in on another PC — the month files and the recipe texts the book keeps, with a
  one-line manifest, and nothing else. No keys (they are bound to you on the machine that made them),
  no clans, boards or settings. The other PC matches the readings to its own clans by recipe and clan
  name, skips what it already has, and names any clan it does not follow rather than guessing. A month
  file inside a folder you copied by hand still imports, so the old way keeps working.
• Edit a board the way 2026 does. Drag a panel by its header, haul its edge or corner to resize, and
  a caret shows where it will land. Push and reflow: the other panels move out of the way and back.
• Update a recipe when a newer one ships. Setup > Recipes shows an Update button on an installed
  recipe when the built-in copy is newer (same name and author, different text), and says what changed
  before you take it. You are no longer pinned to whatever you first imported.
• If installing or updating Ur Score has failed for you before, try again on RoRoRo 1.30. The download
  used to give up after 100 seconds, so on a slow connection it could never finish; RoRoRo 1.30 gives it
  ten minutes. (Ur Score itself still runs on RoRoRo 1.28 or later.)
• The clans behind you, by name. Ur Score modelled catching the clan above and nothing about being
  caught, which is the direction that decides a battle. Two new numbers in Setup > Stats' "Clan and
  field" section: Points the threat is behind, and Hours until the threat passes you. Set the
  second to alert below six hours to hear about it while you can still answer.
• The clan named is the one that takes your place soonest, not the one nearest you on the board. A
  clan three places back going much faster passes you before the one directly behind.
• Your phone names it. An Ur Score number carries no name of its own, so the name rides on the alert's
  label and is rewritten as the threat changes: "H8ER catching K0i2". The number's id stays the same on
  every machine, so a clan leader can still say "set an alert on that number" and every member sets the
  same one. The Alerts card tells you this, because that screen deliberately shows the number's own name
  rather than the one your phone will say.

Fixed

• A clan you only WATCH is no longer treated as one of yours. "Your clans" was worked out separately
  in three places and two had drifted apart. On the race chart a watched rival placed above you anchored
  the whole band on itself, marked itself as yours in the standings, and every other clan's gap was
  measured from its points instead of yours. The Top panel tinted it as yours too. A watched clan now
  keeps its place on the Top list, because seeing it is the point of watching it, and loses the tint.
• A list of groups keeps names only when its recipe says those groups are clans. "Group" is whatever
  a recipe points at, so a list of PLAYERS has the same shape as a list of clans. Recipes now say
  "groupsAreClans": true to keep names; without it a read still records how the whole field is doing
  and writes no names at all. Both shipped lists say it. The import screen tells you which is happening,
  and a race chart with no board says why rather than coming up empty.
• The import consent screen no longer promises that a list like this holds no players. It could not know
  that for a recipe we did not write, and it is the one screen whose job is telling you what you are
  agreeing to.
• Setting up a clan number no longer lets you past RoRoRo's history limit. The count of what you send
  now includes each clan number a list sends, and the Clan and field save refuses a tick that would go
  over, the way a stat tick already did. The start-up warning counts lists too.
• A screen reader names what it reads. Rows in the Stats table, the pages in Setup's list and the
  clan-search matches are read by their names ("Points", "Diagnostics", the clan) instead of the name of
  the thing behind them.
• The score book opens faster and charts draw faster: a five-week book loads in one pass instead of two,
  and a board's charts read their own clan's lines rather than every clan's.
• A stat tick the limit refuses is undone with one redraw instead of three; the race note says "clans";
  a stopped read on a list recipe still names the battle on the board's top line; a locked boards.json
  is copied once, not once per retry; a line in the score book is filed under the clan that was actually
  read even when the clan's settings changed mid-read; a picture fetch that failed is asked again on the
  next read; the trail names an error's type and never its text.

How to install

• In RoRoRo: Plugins, where the marketplace offers Ur Score 0.5.5.
• By hand: download plugin.zip, manifest.sha256 and install.ps1 below into one folder, quit RoRoRo and Ur Score, then right-click install.ps1 › Run with PowerShell. Or unzip plugin.zip into %LOCALAPPDATA%\ROROROblox\plugins\626labs.ur-score\ yourself. Details: Install by hand.

Your recipes, clans, boards and score book live in %LOCALAPPDATA%\626labs.ur-score\ and are never touched by an install. The full history is in CHANGELOG.md.

---

What's Changed

• One meaning of "your clans", and the clans behind you by name by @estevanhernandez-stack-ed in #11
• The race note says "clans", because a screenshot said "sources" by @estevanhernandez-stack-ed in #12
• Edit a board the way 2026 does: drag the header, haul the edge by @estevanhernandez-stack-ed in #13
• Seven rows: two flakes that lied, two silences, and four gaps in the tests by @estevanhernandez-stack-ed in #14
• Stop being pinned to whatever you first imported by @estevanhernandez-stack-ed in #15
• Six rows, and the namespace collision behind three wrong ones by @estevanhernandez-stack-ed in #16
• The CS5001 flake was never about Main by @estevanhernandez-stack-ed in #17
• Two clocks for a final, and two rows that were not defects by @estevanhernandez-stack-ed in #18
• Four edges: re-add on purpose, a cancelled wait, an atomic recipe file, counted skips by @estevanhernandez-stack-ed in #19
• Plan: the remaining 74 rows in six sweeps by @estevanhernandez-stack-ed in #20
• Labs626.UrScore.Source becomes Labs626.UrScore.Fetch by @estevanhernandez-stack-ed in #21
• Sweep A: paper and comments, plus the pop-out id scheme by @estevanhernandez-stack-ed in #23
• B1: one answer for a change that lands mid-read — and V3-S.39's actual cause by @estevanhernandez-stack-ed in #24
• B2: the budget's missing term, and four edges in the account path by @estevanhernandez-stack-ed in #26
• B3: the boards file and the book — Sweep B complete by @estevanhernandez-stack-ed in #27
• Sweep C1 — the core: the line's inputs, the lock's promise, Apply built before applied by @estevanhernandez-stack-ed in #28
• Sweep C2 — UI and composition: the trail fenced, one ShowLine, no discarded task without a line by @estevanhernandez-stack-ed in #29
• Sweep C3 + C4 — the board: one id set per board, settings checked by type, the clans once, and PanelModels split by @estevanhernandez-stack-ed in #30
• Sweep C5 — the owner's account handles renamed out of the tests (S1-F.11) by @estevanhernandez-stack-ed in #31
• Sweep D — performance, measured: the book indexed by source and loaded in one pass by @estevanhernandez-stack-ed in #32
• Sweep E — test infrastructure: a movable clock, the lists probed, the STA stall named, the app composed by a test by @estevanhernandez-stack-ed in #33
• Sweep F — one launch, six rows closed live; then Export stats / Import stats by @estevanhernandez-stack-ed in #34

Full Changelog: v0.5.4...v0.5.5

v0.5.4

What's Changed

• A tick for "also tell me when it comes right again" by @estevanhernandez-stack-ed in #10

Full Changelog: v0.5.3...v0.5.4

v0.5.3

Full Changelog: v0.5.2...v0.5.3

v0.5.2

Full Changelog: v0.5.1...v0.5.2