v0.0.55

Full Changelog: v0.0.53...v0.0.55

v0.0.53

Full Changelog: v0.0.51...v0.0.53

v0.0.51

Full Changelog: v0.0.50...v0.0.51

v0.0.50

Full Changelog: v0.0.46...v0.0.50

v0.0.46

• Fix Shizuku (and therefore key injection) sometimes never coming back
  after a TV reboot, by proactively requesting a Wi-Fi network from
  ConnectivityManager as soon as the accessibility service starts, and
  retrying the Shizuku bind immediately once that network shows up
  instead of only on a fixed 20s poll.
• Self-heal TCL's proprietary AUTO_START app-op for both this app and
  Shizuku via the Shizuku shell-privileged process itself, every time it
  connects. Previously this required a one-off adb shell appops set
  after any full uninstall/reinstall of either app; now opening both
  apps once after a fresh install is enough.
• Holding the MX3 remote's Home button now forwards a genuine long-press
  of Home (matching the OK button's existing hold-forwarding) instead of
  just re-running the app launch on every hold. A quick tap still opens
  MX3 Launcher directly exactly as before, even without Shizuku.
• Key press logging is now opt-in, via two new settings that are both
  off by default -- "Log every key press" (every key, from any remote)
  and "Log remapped button presses" (only what the MX3's mapped buttons
  were turned into). Turn them on only while troubleshooting.

Full Changelog: v0.0.43...v0.0.46

v0.0.43

Full Changelog: v0.0.39...v0.0.43

v0.0.39

• Fixed the TV button on the MX3 Air Mouse: was sending
  KEYCODE_GUIDE, which doesn't do anything useful on newer TCL TVs.
  Now sends the raw keycode TCL's own remote actually expects.
• Fixed the Menu button on the MX3 Air Mouse: was unmapped, so it fell
  through to this TCL TV's own settings bar instead of reaching MX3
  Launcher's App Info feature. Now sends KEYCODE_MENU.
• Added an optional, more reliable way to start Shizuku: this app can
  now send Shizuku's own documented start broadcast directly, using an
  auth token pasted into a new settings field, rather than relying
  solely on Shizuku's own "Start on boot" toggle.
• Added a Paste button next to the Shizuku auth token field, reading
  directly from the clipboard -- pairs with Shizuku's own Copy button
  on its View intents screen, no ADB or long-press menus needed.
• Saving the Shizuku auth token now closes the window immediately,
  rather than waiting for the usual auto-close delay.
• Added a TV brand setting (TCL or Blaupunkt). Affects the MX3 Air
  Mouse's TV button specifically, since different TVs expect different
  keycodes for it -- previously TCL-only, Blaupunkt now works too
  without needing to edit source and rebuild.
• Fixed Channel Up/Down always doing the 5-item D-pad burst instead of
  a single channel change, even while actually watching TCL live TV --
  the foreground-app check now also follows the TV brand setting
  (com.tcl.tv for TCL, confirmed via mCurrentFocus).
• Fixed button remapping sometimes matching on scancode/keycode alone,
  which could trigger on the TV's own original remote as well as the
  MX3 Air Mouse when the two happened to report the same code --
  remapping is now gated on which input device actually sent the
  press.
• Added on-device diagnostic logging that persists across restarts,
  to help track down input-handling issues that are hard to catch
  live with logcat alone.
• Added real press/hold timing forwarding for the MX3 Air Mouse's OK
  button, so the receiving app's own long-press handling can tell a
  quick tap from a hold itself -- e.g. bringing up the channel list on
  a tap vs. program info on a hold -- instead of this app guessing at
  a separate keycode for "held".
• Fixed the Shizuku setup screen auto-closing while actively editing
  the auth token field -- any interaction with the field now cancels
  the pending auto-close, so re-pasting a fresh token no longer races
  against the timer.
• Fixed the Shizuku setup screen still closing itself automatically a
  short while after granting permission, even after 38's fix for the
  field-editing case -- the auto-close is now removed entirely, so the
  screen only closes when Save is tapped.

Full Changelog: v0.0.27...v0.0.39

v0.0.27

• Added metatdata/en-US/images/icon.png

Full Changelog: v0.0.18...v0.0.27

v0.0.26

fixes to pass fdroid automated testing

v0.0.24

Tweaked the F-Droid build process