Specs registries exit codes

Registry: exit-codes

What it lists. Every symbolic exit identifier, owning command and numeric exit status in the release contract.

Policy for a new entry. The TeamCLI team maintains this registry with its implementation. An addition needs a spec change, its consistency check and a release note; an RFC round is needed only if it breaks a commitment. These are draft registration rules pending review.

The Since column records presence at a pinned revision, not an audited first-introduction release. Planned rows confer no implementation or authority.

Entry	Meaning	Since	Source at the tag	Note
add.dry-run	a dry run that reaches a refusal the real run would give before doing anything returns that refusal's status and exit id; a dry run that reaches its plan exits 0 and promises nothing about what happens after (the run lock, a launch, the watch)	present at 0.5.0	contract/exit-codes.json	command add; exit 0
add.ready	the seat is ready	present at 0.5.0	contract/exit-codes.json	command add; exit 0
add.agents	the agents can't be read	present at 0.5.0	contract/exit-codes.json	command add; exit 1
add.already-running	the seat is already running	present at 0.5.0	contract/exit-codes.json	command add; exit 1
add.branch-missing	the merged branch doesn't exist	present at 0.5.0	contract/exit-codes.json	command add; exit 1
add.budget	the budget refuses the seat	present at 0.5.0	contract/exit-codes.json	command add; exit 1
add.caller	the caller may not change the team	present at 0.5.0	contract/exit-codes.json	command add; exit 1
add.ceiling	the file's seat ceiling would be passed	present at 0.5.0	contract/exit-codes.json	command add; exit 1
add.ceilings	a record that does not verify is not in force	present at 0.5.0	contract/exit-codes.json	command add; exit 1
add.changed	the file changed while add was checking	present at 0.5.0	contract/exit-codes.json	command add; exit 1
add.default-session	the session can't be "default"	present at 0.5.0	contract/exit-codes.json	command add; exit 1
add.delegate	the caller is not the approved delegate	present at 0.5.0	contract/exit-codes.json	command add; exit 1
add.delegate-approval	delegation needs a verified approval	present at 0.5.0	contract/exit-codes.json	command add; exit 1
add.delegate-command	the approved delegate may not run add	present at 0.5.0	contract/exit-codes.json	command add; exit 1
add.delegate-edit	the delegate's add is not a same-copy seat: it would edit the file, or names a stanza the approval does not hold	present at 0.5.0	contract/exit-codes.json	command add; exit 1
add.delegate-evidence	the delegate's placement or seats can't be verified	present at 0.5.0	contract/exit-codes.json	command add; exit 1
add.delegate-flag	the delegate may not use this flag	present at 0.5.0	contract/exit-codes.json	command add; exit 1
add.delegate-placement	the approved delegate must be an external non-seat pane	present at 0.5.0	contract/exit-codes.json	command add; exit 1
add.detached	a run with no terminal	present at 0.5.0	contract/exit-codes.json	command add; exit 1
add.doctor	doctor refuses the launch	present at 0.5.0	contract/exit-codes.json	command add; exit 1
add.file-owner	--file is the owner's	present at 0.5.0	contract/exit-codes.json	command add; exit 1
add.herdr	herdr doesn't answer	present at 0.5.0	contract/exit-codes.json	command add; exit 1
add.lobby	the lobby could not be created for the launch	present at 0.5.0	contract/exit-codes.json	command add; exit 1
add.machine	the machine is over a launch limit	present at 0.5.0	contract/exit-codes.json	command add; exit 1
add.machine-again	the machine goes over a launch limit before the seat starts	present at 0.5.0	contract/exit-codes.json	command add; exit 1
add.merged-base	workspace.base is required to read a merged end	present at 0.5.0	contract/exit-codes.json	command add; exit 1
add.never-approved	the file was never approved	present at 0.5.0	contract/exit-codes.json	command add; exit 1
add.no-like	the file has no seat to copy	present at 0.5.0	contract/exit-codes.json	command add; exit 1
add.no-profile	the seat has no launch profile	present at 0.5.0	contract/exit-codes.json	command add; exit 1
add.no-seat	the file has no such seat	present at 0.5.0	contract/exit-codes.json	command add; exit 1
add.not-ready	the launch finished without a ready seat	present at 0.5.0	contract/exit-codes.json	command add; exit 1
add.not-restored	the seat can't be put back into the file	present at 0.5.0	contract/exit-codes.json	command add; exit 1
add.override-owner	--model and --effort on a declared seat are the owner's	present at 0.5.0	contract/exit-codes.json	command add; exit 1
add.placed	the seat would be placed outside the project	present at 0.5.0	contract/exit-codes.json	command add; exit 1
add.pretrust	the lobby is not trusted for this seat's CLI	present at 0.5.0	contract/exit-codes.json	command add; exit 1
add.result-absolute	a result path is absolute	present at 0.5.0	contract/exit-codes.json	command add; exit 1
add.result-exists	the result path already exists	present at 0.5.0	contract/exit-codes.json	command add; exit 1
add.run-lock	another session-mutating run is holding the session	present at 0.5.0	contract/exit-codes.json	command add; exit 1
add.server	the session's server did not start	present at 0.5.0	contract/exit-codes.json	command add; exit 1
add.session-doubt	the pane holds a process the record cannot tie to the launch	present at 0.5.0	contract/exit-codes.json	command add; exit 1
add.session-owner	--session is the owner's	present at 0.5.0	contract/exit-codes.json	command add; exit 1
add.start	the seat has nowhere to start	present at 0.5.0	contract/exit-codes.json	command add; exit 1
add.stopped	the session is stopped	present at 0.5.0	contract/exit-codes.json	command add; exit 1
add.until	--until is not a result path or a merged branch	present at 0.5.0	contract/exit-codes.json	command add; exit 1
add.worktree-failed	the worktree setup failed	present at 0.5.0	contract/exit-codes.json	command add; exit 1
add.worktree-missing	no worktree with that name is recorded	present at 0.5.0	contract/exit-codes.json	command add; exit 1
add.effort	the --effort override is not allowed for the seat's CLI or vendor	present at 0.5.0	contract/exit-codes.json	command add; exit 2
add.file	the team file can't be read	present at 0.5.0	contract/exit-codes.json	command add; exit 2
add.file-invalid	the team file can't be parsed	present at 0.5.0	contract/exit-codes.json	command add; exit 2
add.invocation	the invocation can't be read	present at 0.5.0	contract/exit-codes.json	command add; exit 2
add.locked	the locked edit does not validate	present at 0.5.0	contract/exit-codes.json	command add; exit 2
add.model	the --model override is not known for the seat's CLI	present at 0.5.0	contract/exit-codes.json	command add; exit 2
add.not-a-repo	not inside a git repository	present at 0.5.0	contract/exit-codes.json	command add; exit 2
add.prepared	the prepared edit does not validate	present at 0.5.0	contract/exit-codes.json	command add; exit 2
add.reserved-name	a new seat may not be named lead	present at 0.5.0	contract/exit-codes.json	command add; exit 2
add.seat-name	a seat name is required	present at 0.5.0	contract/exit-codes.json	command add; exit 2
add.temporary-flags	--like, --until and --worktree need --temporary	present at 0.5.0	contract/exit-codes.json	command add; exit 2
add.temporary-unexpected	an unexpected argument was passed to --temporary	present at 0.5.0	contract/exit-codes.json	command add; exit 2
answer.ready	the trust dialog was answered and the seat is ready	present at 0.5.0	contract/exit-codes.json	command answer; exit 0
answer.action	the recorded key was not sent	present at 0.5.0	contract/exit-codes.json	command answer; exit 1
answer.ambiguous	herdr lists more than one agent of this name	present at 0.5.0	contract/exit-codes.json	command answer; exit 1
answer.another-pane	the state records another pane for the caller's seat	present at 0.5.0	contract/exit-codes.json	command answer; exit 1
answer.caller	the caller may not answer a trust dialog	present at 0.5.0	contract/exit-codes.json	command answer; exit 1
answer.detached	a run with no terminal	present at 0.5.0	contract/exit-codes.json	command answer; exit 1
answer.file-owner	--file is the owner's	present at 0.5.0	contract/exit-codes.json	command answer; exit 1
answer.folder	the dialog's folder is not the lobby's exact trust entry	present at 0.5.0	contract/exit-codes.json	command answer; exit 1
answer.label	the trust choice is not the recorded one	present at 0.5.0	contract/exit-codes.json	command answer; exit 1
answer.no-pane	the state records no pane for the caller's seat	present at 0.5.0	contract/exit-codes.json	command answer; exit 1
answer.policy	the dialogs.trust grant is not in force	present at 0.5.0	contract/exit-codes.json	command answer; exit 1
answer.process	the process in the pane is not the one team launched	present at 0.5.0	contract/exit-codes.json	command answer; exit 1
answer.recovery	the trust answer did not complete: the seat stays in recovery	present at 0.5.0	contract/exit-codes.json	command answer; exit 1
answer.screen	the pane is not the trust dialog	present at 0.5.0	contract/exit-codes.json	command answer; exit 1
answer.session-owner	--session is the owner's	present at 0.5.0	contract/exit-codes.json	command answer; exit 1
answer.state	the seat is not waiting at a trust dialog	present at 0.5.0	contract/exit-codes.json	command answer; exit 1
answer.unverified	the name is not a declared seat	present at 0.5.0	contract/exit-codes.json	command answer; exit 1
answer.version	this version has no trust answer	present at 0.5.0	contract/exit-codes.json	command answer; exit 1
answer.configuration	the team file cannot be read	present at 0.5.0	contract/exit-codes.json	command answer; exit 2
answer.usage	the invocation is not a seat and trust	present at 0.5.0	contract/exit-codes.json	command answer; exit 2
ask-show.shown	the question is printed	present at 0.5.0	contract/exit-codes.json	command ask-show; exit 0
ask-show.expired	the marker matches and the ask is past expires_at plus 5 seconds	present at 0.5.0	contract/exit-codes.json	command ask-show; exit 1
ask-show.refused	the marker does not verify, or a file cannot be read	present at 0.5.0	contract/exit-codes.json	command ask-show; exit 1
ask-show.invocation	the invocation cannot be read	present at 0.5.0	contract/exit-codes.json	command ask-show; exit 2
broker.stopped	the broker served until it was stopped	present at 0.5.0	contract/exit-codes.json	command broker; exit 0
broker.bind	the socket could not be bound	present at 0.5.0	contract/exit-codes.json	command broker; exit 1
broker.busy	a broker is already answering on this clone's socket	present at 0.5.0	contract/exit-codes.json	command broker; exit 1
broker.detached	a run with no terminal	present at 0.5.0	contract/exit-codes.json	command broker; exit 1
broker.file	the team file can't be read or parsed	present at 0.5.0	contract/exit-codes.json	command broker; exit 1
broker.keychain	the Keychain credential was refused	present at 0.5.0	contract/exit-codes.json	command broker; exit 1
broker.locked	another start is binding this clone's socket	present at 0.5.0	contract/exit-codes.json	command broker; exit 1
broker.not-owner	only the owner runs broker	present at 0.5.0	contract/exit-codes.json	command broker; exit 1
broker.policy	a task policy the validator refuses	present at 0.5.0	contract/exit-codes.json	command broker; exit 1
broker.source	the team file declares no task source, or one the broker does not serve	present at 0.5.0	contract/exit-codes.json	command broker; exit 1
broker.invocation	the invocation can't be read	present at 0.5.0	contract/exit-codes.json	command broker; exit 2
broker.not-a-repo	not inside a git repository	present at 0.5.0	contract/exit-codes.json	command broker; exit 2
check.ok	nothing needs acting on	present at 0.5.0	contract/exit-codes.json	command check; exit 0
check.repaired	the owner's --repair dropped the state's leftovers, and nothing else needs acting on	present at 0.5.0	contract/exit-codes.json	command check; exit 0
check.file-owner	--file is the owner's	present at 0.5.0	contract/exit-codes.json	command check; exit 1
check.findings	something needs acting on	present at 0.5.0	contract/exit-codes.json	command check; exit 1
check.repair-owner	--repair is the owner's	present at 0.5.0	contract/exit-codes.json	command check; exit 1
check.session-owner	--session is the owner's	present at 0.5.0	contract/exit-codes.json	command check; exit 1
check.file	the team file can't be read	present at 0.5.0	contract/exit-codes.json	command check; exit 2
check.file-invalid	the team file can't be parsed	present at 0.5.0	contract/exit-codes.json	command check; exit 2
check.herdr	herdr doesn't answer	present at 0.5.0	contract/exit-codes.json	command check; exit 2
check.invocation	the invocation can't be read	present at 0.5.0	contract/exit-codes.json	command check; exit 2
check.not-a-repo	not inside a git repository and no team file here	present at 0.5.0	contract/exit-codes.json	command check; exit 2
check.not-yours	the caller may not check this team	present at 0.5.0	contract/exit-codes.json	command check; exit 2
check.state	the state can't be read	present at 0.5.0	contract/exit-codes.json	command check; exit 2
commits.passed	every commit passed	present at 0.5.0	contract/exit-codes.json	command commits; exit 0
commits.refused	a commit was refused	present at 0.5.0	contract/exit-codes.json	command commits; exit 1
commits.threw	a forbidden pattern is not a regular expression	present at 0.5.0	contract/exit-codes.json	command commits; exit 1
commits.empty-range	the range holds no commit	present at 0.5.0	contract/exit-codes.json	command commits; exit 2
commits.file	the team file can't be read	present at 0.5.0	contract/exit-codes.json	command commits; exit 2
commits.file-invalid	the team file can't be parsed	present at 0.5.0	contract/exit-codes.json	command commits; exit 2
commits.invocation	the invocation can't be read	present at 0.5.0	contract/exit-codes.json	command commits; exit 2
commits.ledger	the approval ledger can't be read	present at 0.5.0	contract/exit-codes.json	command commits; exit 2
commits.no-commit	the ref names nothing	present at 0.5.0	contract/exit-codes.json	command commits; exit 2
commits.not-a-ref	since is not a ref	present at 0.5.0	contract/exit-codes.json	command commits; exit 2
commits.not-a-repo	not inside a git repository	present at 0.5.0	contract/exit-codes.json	command commits; exit 2
commits.outside	the check is not in a git repository	present at 0.5.0	contract/exit-codes.json	command commits; exit 2
commits.range	the range can't be resolved	present at 0.5.0	contract/exit-codes.json	command commits; exit 2
commits.since-missing	since doesn't name a commit	present at 0.5.0	contract/exit-codes.json	command commits; exit 2
commits.since-unreachable	since is not reachable from the ref	present at 0.5.0	contract/exit-codes.json	command commits; exit 2
conformance-adapter.finished	the protocol finished	present at 0.5.0	contract/exit-codes.json	command conformance-adapter; exit 0
delegate.done	the authority record was updated, already matched, or passed a write-free preview	present at 0.5.0	contract/exit-codes.json	command delegate; exit 0
delegate.refused	the caller is not the owner, the file changed during the edit, or the write failed	present at 0.5.0	contract/exit-codes.json	command delegate; exit 1
delegate.invalid	the team file or proposed authority record is invalid or cannot be read	present at 0.5.0	contract/exit-codes.json	command delegate; exit 2
delegate.invocation	the command arguments are invalid	present at 0.5.0	contract/exit-codes.json	command delegate; exit 2
doctor.clear	nothing is missing	present at 0.5.0	contract/exit-codes.json	command doctor; exit 0
doctor.missing	something is missing	present at 0.5.0	contract/exit-codes.json	command doctor; exit 1
doctor.file	the team file can't be read	present at 0.5.0	contract/exit-codes.json	command doctor; exit 2
doctor.file-invalid	the team file can't be parsed	present at 0.5.0	contract/exit-codes.json	command doctor; exit 2
doctor.invocation	the invocation can't be read	present at 0.5.0	contract/exit-codes.json	command doctor; exit 2
doctor.not-a-repo	not inside a git repository	present at 0.5.0	contract/exit-codes.json	command doctor; exit 2
down.dry-run	a dry run that reaches a refusal the real run would give before doing anything returns that refusal's status and exit id; a dry run that reaches its plan exits 0 and promises nothing about what happens after (the run lock, a launch, the watch)	present at 0.5.0	contract/exit-codes.json	command down; exit 0
down.idle	there was nothing to stop	present at 0.5.0	contract/exit-codes.json	command down; exit 0
down.stopped	the seats that could be stopped were stopped	present at 0.5.0	contract/exit-codes.json	command down; exit 0
down.abandon	only the owner abandons a team	present at 0.5.0	contract/exit-codes.json	command down; exit 1
down.another-pane	the state records another pane for the caller's seat	present at 0.5.0	contract/exit-codes.json	command down; exit 1
down.caller	the caller may not change the team	present at 0.5.0	contract/exit-codes.json	command down; exit 1
down.delegate	the caller is not the approved delegate of any entry	present at 0.5.0	contract/exit-codes.json	command down; exit 1
down.delegate-approval	delegation needs a verified approval	present at 0.5.0	contract/exit-codes.json	command down; exit 1
down.delegate-command	the approved delegate may not run down	present at 0.5.0	contract/exit-codes.json	command down; exit 1
down.delegate-evidence	delegation cannot verify its placement or seats	present at 0.5.0	contract/exit-codes.json	command down; exit 1
down.delegate-flag	a prohibited flag is the owner's	present at 0.5.0	contract/exit-codes.json	command down; exit 1
down.delegate-placement	the approved delegate must be an external non-seat pane	present at 0.5.0	contract/exit-codes.json	command down; exit 1
down.detached	a run with no terminal	present at 0.5.0	contract/exit-codes.json	command down; exit 1
down.file-owner	--file is the owner's	present at 0.5.0	contract/exit-codes.json	command down; exit 1
down.grant-approval	a grant needs a verified approval	present at 0.5.0	contract/exit-codes.json	command down; exit 1
down.grant-scope	the grant does not list down	present at 0.5.0	contract/exit-codes.json	command down; exit 1
down.held	a step was held	present at 0.5.0	contract/exit-codes.json	command down; exit 1
down.legacy	a legacy approval record stops nobody	present at 0.5.0	contract/exit-codes.json	command down; exit 1
down.never-approved	a file that was never approved stops nobody	present at 0.5.0	contract/exit-codes.json	command down; exit 1
down.no-launch	this call has no way to reach herdr	present at 0.5.0	contract/exit-codes.json	command down; exit 1
down.no-pane	the state records no pane for the caller's seat	present at 0.5.0	contract/exit-codes.json	command down; exit 1
down.refused	a refused approval record stops nobody	present at 0.5.0	contract/exit-codes.json	command down; exit 1
down.run-lock	another session-mutating run is holding the session	present at 0.5.0	contract/exit-codes.json	command down; exit 1
down.session-owner	--session is the owner's	present at 0.5.0	contract/exit-codes.json	command down; exit 1
down.agents	the agents can't be read	present at 0.5.0	contract/exit-codes.json	command down; exit 2
down.file	the team file can't be read	present at 0.5.0	contract/exit-codes.json	command down; exit 2
down.file-invalid	the team file can't be parsed	present at 0.5.0	contract/exit-codes.json	command down; exit 2
down.herdr	herdr doesn't answer	present at 0.5.0	contract/exit-codes.json	command down; exit 2
down.invocation	the invocation can't be read	present at 0.5.0	contract/exit-codes.json	command down; exit 2
down.not-a-repo	not inside a git repository	present at 0.5.0	contract/exit-codes.json	command down; exit 2
feed.ok	the message feed was printed	present at 0.5.0	contract/exit-codes.json	command feed; exit 0
feed.unreadable	the history log cannot be read	present at 0.5.0	contract/exit-codes.json	command feed; exit 1
feed.configuration	the team file can't be read	present at 0.5.0	contract/exit-codes.json	command feed; exit 2
feed.usage	the invocation can't be read	present at 0.5.0	contract/exit-codes.json	command feed; exit 2
grant.done	the authority was written or already matched — the team file's grant, or a standing grant record — or a write-free preview passed	present at 0.5.0	contract/exit-codes.json	command grant; exit 0
grant.refused	the caller is not the owner, the file changed during the edit, or the write failed	present at 0.5.0	contract/exit-codes.json	command grant; exit 1
grant.invalid	the team file, the named seat or team, or the proposed authority record is invalid, unknown or cannot be read	present at 0.5.0	contract/exit-codes.json	command grant; exit 2
grant.invocation	the command arguments are invalid	present at 0.5.0	contract/exit-codes.json	command grant; exit 2
hold.placed	the hold was placed	present at 0.5.0	contract/exit-codes.json	command hold; exit 0
hold.released	the hold was released	present at 0.5.0	contract/exit-codes.json	command hold; exit 0
hold.caller	not the owner, the orchestrator or the operator	present at 0.5.0	contract/exit-codes.json	command hold; exit 1
hold.detached	a run with no terminal	present at 0.5.0	contract/exit-codes.json	command hold; exit 1
hold.held	a hold already stands	present at 0.5.0	contract/exit-codes.json	command hold; exit 1
hold.io	the state can't be read or written	present at 0.5.0	contract/exit-codes.json	command hold; exit 1
hold.not-held	no hold stands	present at 0.5.0	contract/exit-codes.json	command hold; exit 1
hold.until	--until is not a clock or an instant	present at 0.5.0	contract/exit-codes.json	command hold; exit 1
hold.file	the team file can't be read	present at 0.5.0	contract/exit-codes.json	command hold; exit 2
hold.invocation	the invocation can't be read	present at 0.5.0	contract/exit-codes.json	command hold; exit 2
init.restored	the approved copy was restored	present at 0.5.0	contract/exit-codes.json	command init; exit 0
init.wrote	a skeleton was written	present at 0.5.0	contract/exit-codes.json	command init; exit 0
init.detached	a run with no terminal	present at 0.5.0	contract/exit-codes.json	command init; exit 1
init.exists	the team file already exists	present at 0.5.0	contract/exit-codes.json	command init; exit 1
init.git-silent	git doesn't answer for this folder	present at 0.5.0	contract/exit-codes.json	command init; exit 1
init.legacy	the record predates signed records	present at 0.5.0	contract/exit-codes.json	command init; exit 1
init.not-owner	not the owner	present at 0.5.0	contract/exit-codes.json	command init; exit 1
init.nothing	there is nothing to restore	present at 0.5.0	contract/exit-codes.json	command init; exit 1
init.refused	the stored record does not verify	present at 0.5.0	contract/exit-codes.json	command init; exit 1
init.skeleton	the skeleton doesn't validate	present at 0.5.0	contract/exit-codes.json	command init; exit 1
init.tracked	the team file is tracked	present at 0.5.0	contract/exit-codes.json	command init; exit 1
init.invocation	the invocation can't be read	present at 0.5.0	contract/exit-codes.json	command init; exit 2
init.not-a-repo	not inside a git repository	present at 0.5.0	contract/exit-codes.json	command init; exit 2
issues.none	nothing is waiting	present at 0.5.0	contract/exit-codes.json	command issues; exit 0
issues.shown	the task list was shown	present at 0.5.0	contract/exit-codes.json	command issues; exit 0
issues.file	the team file can't be read, it declares no task source, or its source is a broker's	present at 0.5.0	contract/exit-codes.json	command issues; exit 1
issues.missing	the task file is not there	present at 0.5.0	contract/exit-codes.json	command issues; exit 1
issues.shape	a record is not a task, or the task file is not a list	present at 0.5.0	contract/exit-codes.json	command issues; exit 1
issues.invocation	the invocation can't be read	present at 0.5.0	contract/exit-codes.json	command issues; exit 2
issues.not-a-repo	not inside a git repository	present at 0.5.0	contract/exit-codes.json	command issues; exit 2
list.empty	herdr answered and there is nothing to list	present at 0.5.0	contract/exit-codes.json	command list; exit 0
list.herdr-down	herdr cannot be asked, so the list is empty	present at 0.5.0	contract/exit-codes.json	command list; exit 0
list.shown	the sessions are printed	present at 0.5.0	contract/exit-codes.json	command list; exit 0
list.invocation	the arguments are not this command's	present at 0.5.0	contract/exit-codes.json	command list; exit 2
lock.taken	the lock was taken	present at 0.5.0	contract/exit-codes.json	command lock; exit 0
lock.held	the lock is already held	present at 0.5.0	contract/exit-codes.json	command lock; exit 1
lock.io	the lock directory could not be written	present at 0.5.0	contract/exit-codes.json	command lock; exit 1
lock.invocation	the invocation can't be read	present at 0.5.0	contract/exit-codes.json	command lock; exit 2
lock.project	the caller's project can't be read	present at 0.5.0	contract/exit-codes.json	command lock; exit 2
mcp.clear	the bridge is clear: doctor found nothing missing	present at 0.5.0	contract/exit-codes.json	command mcp; exit 0
mcp.up	every observed bridge leg is up	present at 0.5.0	contract/exit-codes.json	command mcp; exit 0
mcp.down	at least one leg is down or unknown	present at 0.5.0	contract/exit-codes.json	command mcp; exit 1
mcp.missing	doctor found something missing	present at 0.5.0	contract/exit-codes.json	command mcp; exit 1
mcp.not-set-up	no bridge configuration exists in the lobby folder	present at 0.5.0	contract/exit-codes.json	command mcp; exit 1
mcp.invocation	the invocation can't be read	present at 0.5.0	contract/exit-codes.json	command mcp; exit 2
messages.none	nothing is waiting	present at 0.5.0	contract/exit-codes.json	command messages; exit 0
messages.shown	a waiting message was shown and its receipt was written	present at 0.5.0	contract/exit-codes.json	command messages; exit 0
messages.file	the team file can't be read	present at 0.5.0	contract/exit-codes.json	command messages; exit 1
messages.id	the filename is not the record's id	present at 0.5.0	contract/exit-codes.json	command messages; exit 1
messages.key	the message key is missing or unreadable	present at 0.5.0	contract/exit-codes.json	command messages; exit 1
messages.root	the record is bound to another checkout	present at 0.5.0	contract/exit-codes.json	command messages; exit 1
messages.seat	the record is addressed to another seat	present at 0.5.0	contract/exit-codes.json	command messages; exit 1
messages.session	the record is bound to another session	present at 0.5.0	contract/exit-codes.json	command messages; exit 1
messages.shape	the record is not a message	present at 0.5.0	contract/exit-codes.json	command messages; exit 1
messages.signature	the signature is not the message key's	present at 0.5.0	contract/exit-codes.json	command messages; exit 1
messages.invocation	the invocation can't be read	present at 0.5.0	contract/exit-codes.json	command messages; exit 2
messages.not-a-repo	not inside a git repository	present at 0.5.0	contract/exit-codes.json	command messages; exit 2
next.none	nothing to take or to release	present at 0.5.0	contract/exit-codes.json	command next; exit 0
next.released	the caller's lease was released	present at 0.5.0	contract/exit-codes.json	command next; exit 0
next.taken	a record was claimed, or the caller's live lease was renewed	present at 0.5.0	contract/exit-codes.json	command next; exit 0
next.wait	the wait was stopped, or a clock that did not advance ended it	present at 0.5.0	contract/exit-codes.json	command next; exit 0
next.broker	no broker is running, or its answer was not one this build knows	present at 0.5.0	contract/exit-codes.json	command next; exit 1
next.caller	the caller is not a seat of this team on its recorded pane	present at 0.5.0	contract/exit-codes.json	command next; exit 1
next.file	the team file can't be read, or it declares no task source	present at 0.5.0	contract/exit-codes.json	command next; exit 1
next.missing	the task file is not there	present at 0.5.0	contract/exit-codes.json	command next; exit 1
next.policy	a task policy the validator refuses	present at 0.5.0	contract/exit-codes.json	command next; exit 1
next.read	the broker failed the read	present at 0.5.0	contract/exit-codes.json	command next; exit 1
next.shape	nothing was taken, and a record is not a task or the task file is not a list	present at 0.5.0	contract/exit-codes.json	command next; exit 1
next.invocation	the invocation can't be read	present at 0.5.0	contract/exit-codes.json	command next; exit 2
next.not-a-repo	not inside a git repository	present at 0.5.0	contract/exit-codes.json	command next; exit 2
plan.none	nothing is takeable	present at 0.5.0	contract/exit-codes.json	command plan; exit 0
plan.shown	the takeable queue was printed	present at 0.5.0	contract/exit-codes.json	command plan; exit 0
plan.broker	no broker is running, or its answer was not one this build knows	present at 0.5.0	contract/exit-codes.json	command plan; exit 1
plan.caller	the caller is not a seat of this team on its recorded pane	present at 0.5.0	contract/exit-codes.json	command plan; exit 1
plan.file	the team file can't be read, or it declares no task source	present at 0.5.0	contract/exit-codes.json	command plan; exit 1
plan.missing	the task file is not there	present at 0.5.0	contract/exit-codes.json	command plan; exit 1
plan.read	the broker failed the read	present at 0.5.0	contract/exit-codes.json	command plan; exit 1
plan.shape	nothing was printed, and a record is not a task or the task file is not a list	present at 0.5.0	contract/exit-codes.json	command plan; exit 1
plan.invocation	the invocation can't be read	present at 0.5.0	contract/exit-codes.json	command plan; exit 2
plan.not-a-repo	not inside a git repository	present at 0.5.0	contract/exit-codes.json	command plan; exit 2
policy.done	the effective policies were listed, updated, or planned	present at 0.5.0	contract/exit-codes.json	command policy; exit 0
policy.refused	a non-owner attempted set or unset, a lower level loosened a higher level, or a source failed verification	present at 0.5.0	contract/exit-codes.json	command policy; exit 1
policy.invalid	the team file, policy name, or value is invalid	present at 0.5.0	contract/exit-codes.json	command policy; exit 2
policy.invocation	the invocation can't be read	present at 0.5.0	contract/exit-codes.json	command policy; exit 2
pr.passed	the pull request body passed	present at 0.5.0	contract/exit-codes.json	command pr; exit 0
pr.refused	the pull request body was refused	present at 0.5.0	contract/exit-codes.json	command pr; exit 1
pr.body	the pull request body can't be read	present at 0.5.0	contract/exit-codes.json	command pr; exit 2
pr.file	the team file can't be read	present at 0.5.0	contract/exit-codes.json	command pr; exit 2
pr.file-invalid	the team file can't be parsed	present at 0.5.0	contract/exit-codes.json	command pr; exit 2
pr.invocation	the invocation can't be read	present at 0.5.0	contract/exit-codes.json	command pr; exit 2
pr.ledger	the approval ledger can't be read	present at 0.5.0	contract/exit-codes.json	command pr; exit 2
pr.not-a-repo	not inside a git repository	present at 0.5.0	contract/exit-codes.json	command pr; exit 2
proc.added	the process was recorded	present at 0.5.0	contract/exit-codes.json	command proc; exit 0
proc.done	the record was cleared	present at 0.5.0	contract/exit-codes.json	command proc; exit 0
proc.listed	the live records were listed	present at 0.5.0	contract/exit-codes.json	command proc; exit 0
proc.caller	the caller is no seat of this team and not the owner	present at 0.5.0	contract/exit-codes.json	command proc; exit 1
proc.detached	a run with no terminal	present at 0.5.0	contract/exit-codes.json	command proc; exit 1
proc.other-seat	another seat's record, which the caller may not clear	present at 0.5.0	contract/exit-codes.json	command proc; exit 1
proc.pid	the pid is not running	present at 0.5.0	contract/exit-codes.json	command proc; exit 1
proc.taken	another seat holds the name, with its process live	present at 0.5.0	contract/exit-codes.json	command proc; exit 1
proc.unknown	no record holds that name	present at 0.5.0	contract/exit-codes.json	command proc; exit 1
proc.file	the team file can't be read	present at 0.5.0	contract/exit-codes.json	command proc; exit 2
proc.file-invalid	the team file can't be parsed	present at 0.5.0	contract/exit-codes.json	command proc; exit 2
proc.invocation	the invocation can't be read	present at 0.5.0	contract/exit-codes.json	command proc; exit 2
proc.not-yours	the caller may not read this team	present at 0.5.0	contract/exit-codes.json	command proc; exit 2
projects.listed	the projects are listed	present at 0.5.0	contract/exit-codes.json	command projects; exit 0
projects.unreadable	the project registry cannot be read	present at 0.5.0	contract/exit-codes.json	command projects; exit 1
projects.invocation	the invocation can't be read	present at 0.5.0	contract/exit-codes.json	command projects; exit 2
register.already	the seat is already recorded on that pane	present at 0.5.0	contract/exit-codes.json	command register; exit 0
register.dry-run	the seat would be registered; nothing was written	present at 0.5.0	contract/exit-codes.json	command register; exit 0
register.ready	the running seat's record was written	present at 0.5.0	contract/exit-codes.json	command register; exit 0
register.caller	--session is the owner's	present at 0.5.0	contract/exit-codes.json	command register; exit 1
register.cli	the pane holds no process the seat's CLI profile names	present at 0.5.0	contract/exit-codes.json	command register; exit 1
register.delegate	the caller is not the approved delegate for up	present at 0.5.0	contract/exit-codes.json	command register; exit 1
register.detached	a run with no terminal	present at 0.5.0	contract/exit-codes.json	command register; exit 1
register.grant	the caller is not the seat the file's grant names for up	present at 0.5.0	contract/exit-codes.json	command register; exit 1
register.grant-flag	--session is the owner's for a granted seat	present at 0.5.0	contract/exit-codes.json	command register; exit 1
register.herdr	herdr doesn't answer	present at 0.5.0	contract/exit-codes.json	command register; exit 1
register.many-agents	the session has more than one agent with that name	present at 0.5.0	contract/exit-codes.json	command register; exit 1
register.no-agent	no agent of that name is running in the session	present at 0.5.0	contract/exit-codes.json	command register; exit 1
register.no-cli	the pane holds no CLI in front of its shell	present at 0.5.0	contract/exit-codes.json	command register; exit 1
register.no-pane	no pane of that id runs in the session	present at 0.5.0	contract/exit-codes.json	command register; exit 1
register.no-profile	the seat has no launch profile	present at 0.5.0	contract/exit-codes.json	command register; exit 1
register.no-seat	the file has no such seat	present at 0.5.0	contract/exit-codes.json	command register; exit 1
register.no-session	the herdr session is not running	present at 0.5.0	contract/exit-codes.json	command register; exit 1
register.not-owner	the caller is not the owner, a delegate this file names for up, or the seat its grant names	present at 0.5.0	contract/exit-codes.json	command register; exit 1
register.pane-named	--pane named a pane herdr already names as another agent	present at 0.5.0	contract/exit-codes.json	command register; exit 1
register.pane-taken	another seat of the session holds that pane	present at 0.5.0	contract/exit-codes.json	command register; exit 1
register.recorded	the state records another pane for that seat	present at 0.5.0	contract/exit-codes.json	command register; exit 1
register.screen	the pane is not the seat at its prompt	present at 0.5.0	contract/exit-codes.json	command register; exit 1
register.session-file	the session was launched from another team file	present at 0.5.0	contract/exit-codes.json	command register; exit 1
register.stopped	the seat is stopped in the file	present at 0.5.0	contract/exit-codes.json	command register; exit 1
register.file	the team file can't be read or parsed, or not inside a git repository	present at 0.5.0	contract/exit-codes.json	command register; exit 2
register.usage	the invocation can't be read	present at 0.5.0	contract/exit-codes.json	command register; exit 2
release.passed	every check passed	present at 0.5.0	contract/exit-codes.json	command release; exit 0
release.missing	a check is missing	present at 0.5.0	contract/exit-codes.json	command release; exit 1
release.unknown	a check is unknown	present at 0.5.0	contract/exit-codes.json	command release; exit 2
release.configuration	the team file can't be read	present at 0.5.0	contract/exit-codes.json	command release; exit 64
release.usage	the invocation can't be read	present at 0.5.0	contract/exit-codes.json	command release; exit 64
reload.reloaded	the seat was closed at an idle prompt and the new launch reached ready	present at 0.5.0	contract/exit-codes.json	command reload; exit 0
reload.same	the seat is already running what the file declares	present at 0.5.0	contract/exit-codes.json	command reload; exit 0
reload.unrecorded	its launch record held no model; the screen's or the file's values were recorded, and nothing was closed	present at 0.5.0	contract/exit-codes.json	command reload; exit 0
reload.absent	the file has no seat of that name	present at 0.5.0	contract/exit-codes.json	command reload; exit 1
reload.changed	the seat changed before it closed; nothing relaunched	present at 0.5.0	contract/exit-codes.json	command reload; exit 1
reload.grant-another-pane	the state records another pane for the granted seat	present at 0.5.0	contract/exit-codes.json	command reload; exit 1
reload.grant-approval	a grant needs a verified approval	present at 0.5.0	contract/exit-codes.json	command reload; exit 1
reload.grant-caller	only the seat the grant names runs this	present at 0.5.0	contract/exit-codes.json	command reload; exit 1
reload.grant-file	the team file can't be read	present at 0.5.0	contract/exit-codes.json	command reload; exit 1
reload.grant-flag	--file is the owner's; the granted seat cannot use it	present at 0.5.0	contract/exit-codes.json	command reload; exit 1
reload.grant-no-pane	no pane is recorded for the granted seat	present at 0.5.0	contract/exit-codes.json	command reload; exit 1
reload.grant-omitted	the file grants nothing	present at 0.5.0	contract/exit-codes.json	command reload; exit 1
reload.grant-scope	the grant does not list reload	present at 0.5.0	contract/exit-codes.json	command reload; exit 1
reload.launch	the close happened and the new launch did not reach ready	present at 0.5.0	contract/exit-codes.json	command reload; exit 1
reload.not-idle	the seat is not at an idle prompt; nothing closed	present at 0.5.0	contract/exit-codes.json	command reload; exit 1
reload.not-running	the seat has no ready pane to close	present at 0.5.0	contract/exit-codes.json	command reload; exit 1
reload.run-lock	another session-mutating run is holding the session	present at 0.5.0	contract/exit-codes.json	command reload; exit 1
reload.self	a reload does not close the caller's seat	present at 0.5.0	contract/exit-codes.json	command reload; exit 1
reload.unsent	the seat holds unsent text; nothing closed	present at 0.5.0	contract/exit-codes.json	command reload; exit 1
reload.untested	the installed CLI is outside its profile's tested range, so the relaunch's ready screen may not be recognised; nothing closed	present at 0.5.0	contract/exit-codes.json	command reload; exit 1
reload.working	the seat is working; nothing closed	present at 0.5.0	contract/exit-codes.json	command reload; exit 1
reload.file	the team file can't be read	present at 0.5.0	contract/exit-codes.json	command reload; exit 2
reload.invocation	the invocation can't be read	present at 0.5.0	contract/exit-codes.json	command reload; exit 2
remove.kept	a stopped seat was kept	present at 0.5.0	contract/exit-codes.json	command remove; exit 0
remove.removed	the seat was removed	present at 0.5.0	contract/exit-codes.json	command remove; exit 0
remove.swapped	a lead seat was stopped for a swap; the file still names it	present at 0.5.0	contract/exit-codes.json	command remove; exit 0
remove.temporary	a temporary seat was removed	present at 0.5.0	contract/exit-codes.json	command remove; exit 0
remove.abandon	only the owner abandons a seat	present at 0.5.0	contract/exit-codes.json	command remove; exit 1
remove.agents	the agents can't be read	present at 0.5.0	contract/exit-codes.json	command remove; exit 1
remove.ambiguous	herdr lists more than one agent of this name	present at 0.5.0	contract/exit-codes.json	command remove; exit 1
remove.another-pane	the state records another pane for the caller's seat	present at 0.5.0	contract/exit-codes.json	command remove; exit 1
remove.busy	the seat is not free	present at 0.5.0	contract/exit-codes.json	command remove; exit 1
remove.caller	the caller may not change the team	present at 0.5.0	contract/exit-codes.json	command remove; exit 1
remove.coordinator	only the owner removes the orchestrator's or the operator's seat	present at 0.5.0	contract/exit-codes.json	command remove; exit 1
remove.default-session	the session can't be "default"	present at 0.5.0	contract/exit-codes.json	command remove; exit 1
remove.delegate	the caller is not the approved delegate	present at 0.5.0	contract/exit-codes.json	command remove; exit 1
remove.delegate-approval	delegation needs a verified approval	present at 0.5.0	contract/exit-codes.json	command remove; exit 1
remove.delegate-command	the approved delegate may not run remove	present at 0.5.0	contract/exit-codes.json	command remove; exit 1
remove.delegate-evidence	the delegate's placement or seats can't be verified	present at 0.5.0	contract/exit-codes.json	command remove; exit 1
remove.delegate-flag	the delegate may not use this flag	present at 0.5.0	contract/exit-codes.json	command remove; exit 1
remove.delegate-placement	the approved delegate must be an external non-seat pane	present at 0.5.0	contract/exit-codes.json	command remove; exit 1
remove.detached	a run with no terminal	present at 0.5.0	contract/exit-codes.json	command remove; exit 1
remove.file-owner	--file is the owner's	present at 0.5.0	contract/exit-codes.json	command remove; exit 1
remove.herdr	herdr doesn't answer	present at 0.5.0	contract/exit-codes.json	command remove; exit 1
remove.keep-temporary	a temporary seat is not kept in the file	present at 0.5.0	contract/exit-codes.json	command remove; exit 1
remove.never-approved	the file was never approved	present at 0.5.0	contract/exit-codes.json	command remove; exit 1
remove.no-launch	this call has no way to reach herdr	present at 0.5.0	contract/exit-codes.json	command remove; exit 1
remove.no-pane	the state records no pane for the caller's seat	present at 0.5.0	contract/exit-codes.json	command remove; exit 1
remove.no-profile	the running seat has no launch profile	present at 0.5.0	contract/exit-codes.json	command remove; exit 1
remove.no-seat	the team has no such seat	present at 0.5.0	contract/exit-codes.json	command remove; exit 1
remove.run-lock	another session-mutating run is holding the session	present at 0.5.0	contract/exit-codes.json	command remove; exit 1
remove.session-owner	--session is the owner's	present at 0.5.0	contract/exit-codes.json	command remove; exit 1
remove.stop-failed	the seat could not be stopped	present at 0.5.0	contract/exit-codes.json	command remove; exit 1
remove.swap-grant	no grant or delegate admits this caller's swap of a lead seat	present at 0.5.0	contract/exit-codes.json	command remove; exit 1
remove.swap-self	a seat can't swap its own lead seat	present at 0.5.0	contract/exit-codes.json	command remove; exit 1
remove.unverified	a name the file does not carry is left as it is	present at 0.5.0	contract/exit-codes.json	command remove; exit 1
remove.edit	the edit would not validate	present at 0.5.0	contract/exit-codes.json	command remove; exit 2
remove.file	the team file can't be read	present at 0.5.0	contract/exit-codes.json	command remove; exit 2
remove.file-invalid	the team file can't be parsed	present at 0.5.0	contract/exit-codes.json	command remove; exit 2
remove.invocation	the invocation can't be read	present at 0.5.0	contract/exit-codes.json	command remove; exit 2
remove.locked	the locked edit does not validate	present at 0.5.0	contract/exit-codes.json	command remove; exit 2
remove.not-a-repo	not inside a git repository	present at 0.5.0	contract/exit-codes.json	command remove; exit 2
rename.done	the seat was renamed (or --renumber planned/applied)	present at 0.5.0	contract/exit-codes.json	command rename; exit 0
rename.refused	the caller is not the owner or leads, the target seat exists, or the target clashes with a nickname	present at 0.5.0	contract/exit-codes.json	command rename; exit 1
rename.invalid	the team file or new seat name is invalid	present at 0.5.0	contract/exit-codes.json	command rename; exit 2
rename.invocation	the invocation can't be read	present at 0.5.0	contract/exit-codes.json	command rename; exit 2
restart.dry-run	the stop and launch plan was printed and nothing was touched	present at 0.5.0	contract/exit-codes.json	command restart; exit 0
restart.ready	the seat was restarted in a new pane	present at 0.5.0	contract/exit-codes.json	command restart; exit 0
restart.abandon-working	a seat caller passed --abandon on a working seat	present at 0.5.0	contract/exit-codes.json	command restart; exit 1
restart.busy	the seat is busy and --abandon was not given, or graceful stop did not close the pane	present at 0.5.0	contract/exit-codes.json	command restart; exit 1
restart.caller	the caller may not restart a seat, or passed an owner-only flag	present at 0.5.0	contract/exit-codes.json	command restart; exit 1
restart.detached	a run with no terminal	present at 0.5.0	contract/exit-codes.json	command restart; exit 1
restart.herdr	herdr doesn't answer	present at 0.5.0	contract/exit-codes.json	command restart; exit 1
restart.lead	a seat caller passed --abandon for the orchestrator's or the operator's seat	present at 0.5.0	contract/exit-codes.json	command restart; exit 1
restart.no-session	the herdr session is not running	present at 0.5.0	contract/exit-codes.json	command restart; exit 1
restart.not-ready	preflight or launch did not produce a ready seat	present at 0.5.0	contract/exit-codes.json	command restart; exit 1
restart.replaced	the old pane holds a process that is not the seat's CLI	present at 0.5.0	contract/exit-codes.json	command restart; exit 1
restart.run-lock	another session-mutating run is holding the session	present at 0.5.0	contract/exit-codes.json	command restart; exit 1
restart.self	a seat caller tried to restart its own recorded pane	present at 0.5.0	contract/exit-codes.json	command restart; exit 1
restart.signed-off	the seat is parked or stopped	present at 0.5.0	contract/exit-codes.json	command restart; exit 1
restart.temporary	the seat is a temporary copy	present at 0.5.0	contract/exit-codes.json	command restart; exit 1
restart.unknown	the seat is not a declared seat	present at 0.5.0	contract/exit-codes.json	command restart; exit 1
restart.configuration	the team file can't be read or parsed, or not inside a git repository	present at 0.5.0	contract/exit-codes.json	command restart; exit 2
restart.usage	the invocation can't be read	present at 0.5.0	contract/exit-codes.json	command restart; exit 2
revoke.done	the authority was removed or matched, the standing grant's revocation was appended or already named, or a write-free preview passed	present at 0.5.0	contract/exit-codes.json	command revoke; exit 0
revoke.refused	the caller is not the owner, the file changed during the edit, or the write failed	present at 0.5.0	contract/exit-codes.json	command revoke; exit 1
revoke.invalid	the team file, the named target or the proposed authority record is invalid or cannot be read	present at 0.5.0	contract/exit-codes.json	command revoke; exit 2
revoke.invocation	the command arguments are invalid	present at 0.5.0	contract/exit-codes.json	command revoke; exit 2
route.dry-run	the pair is admitted; the address is answered and nothing was written	present at 0.5.0	contract/exit-codes.json	command route; exit 0
route.routed	the pair is admitted and the recipient's address is answered and recorded	present at 0.5.0	contract/exit-codes.json	command route; exit 0
route.detached	a run with no terminal	present at 0.5.0	contract/exit-codes.json	command route; exit 1
route.refused	no address was answered, on purpose	present at 0.5.0	contract/exit-codes.json	command route; exit 1
route.unrecorded	the pair is admitted and the route record could not be written	present at 0.5.0	contract/exit-codes.json	command route; exit 1
route.configuration	the team file cannot be read	present at 0.5.0	contract/exit-codes.json	command route; exit 2
route.usage	the invocation cannot be read	present at 0.5.0	contract/exit-codes.json	command route; exit 2
seats.shown	the seats table was printed	present at 0.5.0	contract/exit-codes.json	command seats; exit 0
seats.file-owner	--file is the owner's	present at 0.5.0	contract/exit-codes.json	command seats; exit 1
seats.session-owner	--session is the owner's	present at 0.5.0	contract/exit-codes.json	command seats; exit 1
seats.file	the team file can't be read	present at 0.5.0	contract/exit-codes.json	command seats; exit 2
seats.file-invalid	the team file can't be parsed	present at 0.5.0	contract/exit-codes.json	command seats; exit 2
seats.herdr	herdr doesn't answer	present at 0.5.0	contract/exit-codes.json	command seats; exit 2
seats.invocation	the invocation can't be read	present at 0.5.0	contract/exit-codes.json	command seats; exit 2
seats.not-a-repo	not inside a git repository	present at 0.5.0	contract/exit-codes.json	command seats; exit 2
seats.not-yours	the caller may not read this team	present at 0.5.0	contract/exit-codes.json	command seats; exit 2
send.answered	the seat's reply came back within the window	present at 0.5.0	contract/exit-codes.json	command send; exit 0
send.delivered	the seat's channel took the message	present at 0.5.0	contract/exit-codes.json	command send; exit 0
send.dry-run	the seat and channel were resolved and nothing was written	present at 0.5.0	contract/exit-codes.json	command send; exit 0
send.listed	the addressable seats were printed, nothing was sent	present at 0.5.0	contract/exit-codes.json	command send; exit 0
send.record-dry-run	a recorded native delivery was resolved and nothing was written	present at 0.5.0	contract/exit-codes.json	command send; exit 0
send.recorded	a native delivery the sender made itself was written to the history	present at 0.5.0	contract/exit-codes.json	command send; exit 0
send.detached	a run with no terminal	present at 0.5.0	contract/exit-codes.json	command send; exit 1
send.held	the message is on disk and the pane was left untouched	present at 0.5.0	contract/exit-codes.json	command send; exit 1
send.not-submitted	the trigger was typed and the seat never took it	present at 0.5.0	contract/exit-codes.json	command send; exit 1
send.refused	nothing was sent, on purpose	present at 0.5.0	contract/exit-codes.json	command send; exit 1
send.stopped	the seat is stopped in the team file	present at 0.5.0	contract/exit-codes.json	command send; exit 1
send.timeout	sent on the socket, but no reply within the window	present at 0.5.0	contract/exit-codes.json	command send; exit 1
send.unreachable	the seat was not reached	present at 0.5.0	contract/exit-codes.json	command send; exit 1
send.configuration	the team file cannot be read, or the caller's folder is no team and a bare name has none to resolve in	present at 0.5.0	contract/exit-codes.json	command send; exit 2
send.usage	the invocation can't be read	present at 0.5.0	contract/exit-codes.json	command send; exit 2
status.agrees	the file, the state and the session agree	present at 0.5.0	contract/exit-codes.json	command status; exit 0
status.project-listed	the project's teams are listed	present at 0.5.0	contract/exit-codes.json	command status; exit 0
status.difference	there is a difference	present at 0.5.0	contract/exit-codes.json	command status; exit 1
status.file-owner	--file is the owner's	present at 0.5.0	contract/exit-codes.json	command status; exit 1
status.project-unknown	no project is named that	present at 0.5.0	contract/exit-codes.json	command status; exit 1
status.session-owner	--session is the owner's	present at 0.5.0	contract/exit-codes.json	command status; exit 1
status.file	the team file can't be read	present at 0.5.0	contract/exit-codes.json	command status; exit 2
status.file-invalid	the team file can't be parsed	present at 0.5.0	contract/exit-codes.json	command status; exit 2
status.herdr	herdr doesn't answer	present at 0.5.0	contract/exit-codes.json	command status; exit 2
status.invocation	the invocation can't be read	present at 0.5.0	contract/exit-codes.json	command status; exit 2
status.not-a-repo	not inside a git repository	present at 0.5.0	contract/exit-codes.json	command status; exit 2
status.not-yours	the caller may not read this team	present at 0.5.0	contract/exit-codes.json	command status; exit 2
team.command-help	a command's help was printed	present at 0.5.0	contract/exit-codes.json	command team; exit 0
team.help	help was printed	present at 0.5.0	contract/exit-codes.json	command team; exit 0
team.version	the version was printed	present at 0.5.0	contract/exit-codes.json	command team; exit 0
team.command-threw	a command threw	present at 0.5.0	contract/exit-codes.json	command team; exit 1
team.approve-removed	the approve command was removed in 0.5.0	present at 0.5.0	contract/exit-codes.json	command team; exit 2
team.no-command	no command was given	present at 0.5.0	contract/exit-codes.json	command team; exit 2
team.unknown	the command is unknown	present at 0.5.0	contract/exit-codes.json	command team; exit 2
tempo.set	the tempo was written	present at 0.5.0	contract/exit-codes.json	command tempo; exit 0
tempo.unchanged	the tempo was already that word	present at 0.5.0	contract/exit-codes.json	command tempo; exit 0
tempo.detached	a run with no terminal	present at 0.5.0	contract/exit-codes.json	command tempo; exit 1
tempo.not-owner	not the owner	present at 0.5.0	contract/exit-codes.json	command tempo; exit 1
tempo.file	the team file can't be read	present at 0.5.0	contract/exit-codes.json	command tempo; exit 2
tempo.invocation	the invocation can't be read	present at 0.5.0	contract/exit-codes.json	command tempo; exit 2
tempo.not-a-repo	not inside a git repository	present at 0.5.0	contract/exit-codes.json	command tempo; exit 2
tempo.word	the word is not a tempo	present at 0.5.0	contract/exit-codes.json	command tempo; exit 2
unlock.released	the lock was released	present at 0.5.0	contract/exit-codes.json	command unlock; exit 0
unlock.io	the lock directory could not be removed	present at 0.5.0	contract/exit-codes.json	command unlock; exit 1
unlock.not-held	the lock is not held	present at 0.5.0	contract/exit-codes.json	command unlock; exit 1
unlock.not-yours	the lock is held by someone else	present at 0.5.0	contract/exit-codes.json	command unlock; exit 1
unlock.unknown-holder	the lock's holder can't be read	present at 0.5.0	contract/exit-codes.json	command unlock; exit 1
unlock.invocation	the invocation can't be read	present at 0.5.0	contract/exit-codes.json	command unlock; exit 2
unlock.project	the caller's project can't be read	present at 0.5.0	contract/exit-codes.json	command unlock; exit 2
up.dry-run	a dry run that reaches a refusal the real run would give before doing anything returns that refusal's status and exit id; a dry run that reaches its plan exits 0 and promises nothing about what happens after (the run lock, a launch, the watch)	present at 0.5.0	contract/exit-codes.json	command up; exit 0
up.ready	the launch finished	present at 0.5.0	contract/exit-codes.json	command up; exit 0
up.agents	the agents can't be read	present at 0.5.0	contract/exit-codes.json	command up; exit 1
up.clear	a stopped session this team records did not clear	present at 0.5.0	contract/exit-codes.json	command up; exit 1
up.delegate	only the owner or the approved delegate runs up	present at 0.5.0	contract/exit-codes.json	command up; exit 1
up.delegate-approval	the delegate gate needs a verified approval	present at 0.5.0	contract/exit-codes.json	command up; exit 1
up.delegate-command	the approved delegate may not run up	present at 0.5.0	contract/exit-codes.json	command up; exit 1
up.delegate-evidence	the delegate gate can't verify its placement or seats	present at 0.5.0	contract/exit-codes.json	command up; exit 1
up.delegate-flag	--session or --file is the owner's on a delegated run	present at 0.5.0	contract/exit-codes.json	command up; exit 1
up.delegate-placement	the approved delegate must be an external non-seat pane	present at 0.5.0	contract/exit-codes.json	command up; exit 1
up.deny	deny	present at 0.5.0	contract/exit-codes.json	command up; exit 1
up.detached	a run with no terminal	present at 0.5.0	contract/exit-codes.json	command up; exit 1
up.doctor	doctor refuses the launch	present at 0.5.0	contract/exit-codes.json	command up; exit 1
up.grant-another-pane	the granted seat is not on its recorded pane	present at 0.5.0	contract/exit-codes.json	command up; exit 1
up.grant-approval	a grant needs a verified approval	present at 0.5.0	contract/exit-codes.json	command up; exit 1
up.grant-caller	only the seat the grant names runs this	present at 0.5.0	contract/exit-codes.json	command up; exit 1
up.grant-flag	a granted seat cannot aim --session or --file	present at 0.5.0	contract/exit-codes.json	command up; exit 1
up.grant-no-pane	no pane is recorded for the granted seat	present at 0.5.0	contract/exit-codes.json	command up; exit 1
up.grant-scope	the grant does not list up	present at 0.5.0	contract/exit-codes.json	command up; exit 1
up.herdr	herdr doesn't answer	present at 0.5.0	contract/exit-codes.json	command up; exit 1
up.lobby	the lobby could not be created for the launch	present at 0.5.0	contract/exit-codes.json	command up; exit 1
up.machine	the machine is over a launch limit	present at 0.5.0	contract/exit-codes.json	command up; exit 1
up.never-approved	the file was never approved	present at 0.5.0	contract/exit-codes.json	command up; exit 1
up.no-launch	this call has no way to reach herdr	present at 0.5.0	contract/exit-codes.json	command up; exit 1
up.not-owner	deny	present at 0.5.0	contract/exit-codes.json	command up; exit 1
up.pending	a seat was left short of ready	present at 0.5.0	contract/exit-codes.json	command up; exit 1
up.placement	a seat has nowhere to start	present at 0.5.0	contract/exit-codes.json	command up; exit 1
up.run-lock	another session-mutating run is holding the session	present at 0.5.0	contract/exit-codes.json	command up; exit 1
up.server	the session's server did not start	present at 0.5.0	contract/exit-codes.json	command up; exit 1
up.stopped	the session is stopped	present at 0.5.0	contract/exit-codes.json	command up; exit 1
up.unknown	a running agent is not in this file's state	present at 0.5.0	contract/exit-codes.json	command up; exit 1
up.watch	the watch did not start	present at 0.5.0	contract/exit-codes.json	command up; exit 1
up.file	the team file can't be read	present at 0.5.0	contract/exit-codes.json	command up; exit 2
up.file-invalid	the team file can't be parsed	present at 0.5.0	contract/exit-codes.json	command up; exit 2
up.invocation	the invocation can't be read	present at 0.5.0	contract/exit-codes.json	command up; exit 2
up.not-a-repo	not inside a git repository	present at 0.5.0	contract/exit-codes.json	command up; exit 2
usage.block	the machine's report printed	present at 0.5.0	contract/exit-codes.json	command usage; exit 0
usage.invocation	the invocation can't be read	present at 0.5.0	contract/exit-codes.json	command usage; exit 2
usage.store	the store folder can't be read	present at 0.5.0	contract/exit-codes.json	command usage; exit 2
watch.started	the watch started in its own workspace	present at 0.5.0	contract/exit-codes.json	command watch; exit 0
watch.stopped	the watch ran and stopped	present at 0.5.0	contract/exit-codes.json	command watch; exit 0
watch.already	a watch already runs	present at 0.5.0	contract/exit-codes.json	command watch; exit 1
watch.caller	a run with no terminal	present at 0.5.0	contract/exit-codes.json	command watch; exit 1
watch.file-owner	--file is the owner's	present at 0.5.0	contract/exit-codes.json	command watch; exit 1
watch.no-notify	a seat passed --no-notify	present at 0.5.0	contract/exit-codes.json	command watch; exit 1
watch.no-nudge	a seat passed --no-nudge	present at 0.5.0	contract/exit-codes.json	command watch; exit 1
watch.watchdog	only the recorded watch may read the file up recorded	present at 0.5.0	contract/exit-codes.json	command watch; exit 1
watch.workspace	the watch did not start in its workspace	present at 0.5.0	contract/exit-codes.json	command watch; exit 1
watch.file	the team file can't be read	present at 0.5.0	contract/exit-codes.json	command watch; exit 2
watch.file-invalid	the team file can't be parsed	present at 0.5.0	contract/exit-codes.json	command watch; exit 2
watch.invocation	the invocation can't be read	present at 0.5.0	contract/exit-codes.json	command watch; exit 2
watch.not-a-repo	not inside a git repository	present at 0.5.0	contract/exit-codes.json	command watch; exit 2
worktree.created	the worktree was created	present at 0.5.0	contract/exit-codes.json	command worktree; exit 0
worktree.listed	the recorded worktrees were listed	present at 0.5.0	contract/exit-codes.json	command worktree; exit 0
worktree.record-gone	the record was removed after the folder was already gone	present at 0.5.0	contract/exit-codes.json	command worktree; exit 0
worktree.removed	the worktree was removed	present at 0.5.0	contract/exit-codes.json	command worktree; exit 0
worktree.another-pane	the state records another pane for the caller's seat	present at 0.5.0	contract/exit-codes.json	command worktree; exit 1
worktree.base	workspace.base is not a branch here	present at 0.5.0	contract/exit-codes.json	command worktree; exit 1
worktree.branch	the branch already exists	present at 0.5.0	contract/exit-codes.json	command worktree; exit 1
worktree.branch-name	the branch name is not valid	present at 0.5.0	contract/exit-codes.json	command worktree; exit 1
worktree.caller	the caller may not change the team	present at 0.5.0	contract/exit-codes.json	command worktree; exit 1
worktree.config	workspace.path and workspace.base are required	present at 0.5.0	contract/exit-codes.json	command worktree; exit 1
worktree.create-failed	the worktree was not created	present at 0.5.0	contract/exit-codes.json	command worktree; exit 1
worktree.default-session	the session can't be "default"	present at 0.5.0	contract/exit-codes.json	command worktree; exit 1
worktree.detached	a run with no terminal	present at 0.5.0	contract/exit-codes.json	command worktree; exit 1
worktree.dirty	the worktree has uncommitted files	present at 0.5.0	contract/exit-codes.json	command worktree; exit 1
worktree.elsewhere	the worktree is recorded in another session	present at 0.5.0	contract/exit-codes.json	command worktree; exit 1
worktree.exists	the worktree folder already exists	present at 0.5.0	contract/exit-codes.json	command worktree; exit 1
worktree.fetch	the base couldn't be fetched	present at 0.5.0	contract/exit-codes.json	command worktree; exit 1
worktree.file-owner	--file is the owner's	present at 0.5.0	contract/exit-codes.json	command worktree; exit 1
worktree.forbidden	a public project refuses that name	present at 0.5.0	contract/exit-codes.json	command worktree; exit 1
worktree.kind	--kind is not a single segment	present at 0.5.0	contract/exit-codes.json	command worktree; exit 1
worktree.kind-nowhere	--kind has nowhere to go	present at 0.5.0	contract/exit-codes.json	command worktree; exit 1
worktree.kind-required	--kind is required	present at 0.5.0	contract/exit-codes.json	command worktree; exit 1
worktree.limit	the worktree limit is reached	present at 0.5.0	contract/exit-codes.json	command worktree; exit 1
worktree.missing	no worktree with that name is recorded	present at 0.5.0	contract/exit-codes.json	command worktree; exit 1
worktree.never-approved	the standing approval record is legacy or cannot be verified	present at 0.5.0	contract/exit-codes.json	command worktree; exit 1
worktree.no-pane	the state records no pane for the caller's seat	present at 0.5.0	contract/exit-codes.json	command worktree; exit 1
worktree.occupied	a seat is recorded in the worktree	present at 0.5.0	contract/exit-codes.json	command worktree; exit 1
worktree.path-kind	workspace.path must not contain {kind}	present at 0.5.0	contract/exit-codes.json	command worktree; exit 1
worktree.placeholder	the branch or path pattern has an unknown placeholder	present at 0.5.0	contract/exit-codes.json	command worktree; exit 1
worktree.published	the branch already exists on a remote	present at 0.5.0	contract/exit-codes.json	command worktree; exit 1
worktree.recorded	the task is already recorded	present at 0.5.0	contract/exit-codes.json	command worktree; exit 1
worktree.recorded-elsewhere	the task is recorded in another session	present at 0.5.0	contract/exit-codes.json	command worktree; exit 1
worktree.remove-branch	the --branch given does not name the branch the worktree is on	present at 0.5.0	contract/exit-codes.json	command worktree; exit 1
worktree.remove-failed	the worktree was not removed	present at 0.5.0	contract/exit-codes.json	command worktree; exit 1
worktree.remove-task	the task name is not a single segment	present at 0.5.0	contract/exit-codes.json	command worktree; exit 1
worktree.seat	--seat names no declared seat	present at 0.5.0	contract/exit-codes.json	command worktree; exit 1
worktree.session-owner	--session is the owner's	present at 0.5.0	contract/exit-codes.json	command worktree; exit 1
worktree.setup	setup failed	present at 0.5.0	contract/exit-codes.json	command worktree; exit 1
worktree.shared	the workspace is shared	present at 0.5.0	contract/exit-codes.json	command worktree; exit 1
worktree.symlink	the worktree follows a symlink outside the trust paths	present at 0.5.0	contract/exit-codes.json	command worktree; exit 1
worktree.task	the task name is not a single segment	present at 0.5.0	contract/exit-codes.json	command worktree; exit 1
worktree.tracking	the base tracks something that is not a remote branch	present at 0.5.0	contract/exit-codes.json	command worktree; exit 1
worktree.trust	the worktree is outside the file's trust paths	present at 0.5.0	contract/exit-codes.json	command worktree; exit 1
worktree.unpublished	the worktree has commits on no remote branch	present at 0.5.0	contract/exit-codes.json	command worktree; exit 1
worktree.unreadable	the worktree couldn't be read	present at 0.5.0	contract/exit-codes.json	command worktree; exit 1
worktree.branch-flags	new and list take no --branch	present at 0.5.0	contract/exit-codes.json	command worktree; exit 2
worktree.extra	an unexpected argument was given	present at 0.5.0	contract/exit-codes.json	command worktree; exit 2
worktree.file	the team file can't be read	present at 0.5.0	contract/exit-codes.json	command worktree; exit 2
worktree.file-invalid	the team file can't be parsed	present at 0.5.0	contract/exit-codes.json	command worktree; exit 2
worktree.invocation	the invocation can't be read	present at 0.5.0	contract/exit-codes.json	command worktree; exit 2
worktree.not-a-repo	not inside a git repository	present at 0.5.0	contract/exit-codes.json	command worktree; exit 2
worktree.remove-flags	remove takes no --kind or --seat	present at 0.5.0	contract/exit-codes.json	command worktree; exit 2
worktree.subcommand	a subcommand is required	present at 0.5.0	contract/exit-codes.json	command worktree; exit 2
worktree.task-required	a task name is required	present at 0.5.0	contract/exit-codes.json	command worktree; exit 2

All 569 contract entries are retained in source order, including success and refusal variants sharing a numeric status. No identifier is inferred from a wildcard contribution. Proof: exit-codes:check, test/exit-codes.test.ts; rendered reference docs/reference/exit-codes.md. This fully expands the task, grant, registry, watch, lock, release and worktree contributions.

Not at v0.5.0; present at int/0.5.1 8acb470b, unreleased:

Entry	Meaning	Since	Source at the tag	Note
add.human	the named seat is a human's pane	0.5.1 unreleased	contract/exit-codes.json at int/0.5.1 8acb470b	command add; exit 1
answer.human	the seat is a human's pane; no dialog key is pressed and no rules line is typed	0.5.1 unreleased	contract/exit-codes.json at int/0.5.1 8acb470b	command answer; exit 1
bus.started	the bus started and served on .agents/bus.sock	0.5.1 unreleased	contract/exit-codes.json at int/0.5.1 8acb470b	command bus; exit 0
bus.stopped	the bus served until it was stopped	0.5.1 unreleased	contract/exit-codes.json at int/0.5.1 8acb470b	command bus; exit 0
bus.refused	the caller is not the owner at a terminal outside herdr, a bus is already running or starting, or the socket could not be bound	0.5.1 unreleased	contract/exit-codes.json at int/0.5.1 8acb470b	command bus; exit 1
bus.configuration	not inside a git repository or the team file cannot be read	0.5.1 unreleased	contract/exit-codes.json at int/0.5.1 8acb470b	command bus; exit 2
bus.usage	the invocation cannot be read	0.5.1 unreleased	contract/exit-codes.json at int/0.5.1 8acb470b	command bus; exit 2
drops.ok	the caller's unread drops were listed, or followed until it stopped	0.5.1 unreleased	contract/exit-codes.json at int/0.5.1 8acb470b	command drops; exit 0
drops.file	the team file can't be read	0.5.1 unreleased	contract/exit-codes.json at int/0.5.1 8acb470b	command drops; exit 1
drops.refused	the caller is not a placed seat of this team	0.5.1 unreleased	contract/exit-codes.json at int/0.5.1 8acb470b	command drops; exit 1
drops.unreadable	the drop folder can't be read	0.5.1 unreleased	contract/exit-codes.json at int/0.5.1 8acb470b	command drops; exit 1
drops.invocation	the invocation can't be read	0.5.1 unreleased	contract/exit-codes.json at int/0.5.1 8acb470b	command drops; exit 2
drops.not-a-repo	not inside a git repository	0.5.1 unreleased	contract/exit-codes.json at int/0.5.1 8acb470b	command drops; exit 2
mcp.serve-ended	the inbox server's stdin closed and it stopped cleanly	0.5.1 unreleased	contract/exit-codes.json at int/0.5.1 8acb470b	command mcp; exit 0
mcp.serve-refused	the inbox server can't start: the invocation, the team placement or its inbox folder can't be read	0.5.1 unreleased	contract/exit-codes.json at int/0.5.1 8acb470b	command mcp; exit 2
raise.dry-run	the route the raise would take; nothing was written	0.5.1 unreleased	contract/exit-codes.json at int/0.5.1 8acb470b	command raise; exit 0
raise.merged	the line was merged into the owner's open record, and the record counts it	0.5.1 unreleased	contract/exit-codes.json at int/0.5.1 8acb470b	command raise; exit 0
raise.raised	the line reached the owner's mailbox as a signed record, and the owner was notified	0.5.1 unreleased	contract/exit-codes.json at int/0.5.1 8acb470b	command raise; exit 0
raise.capped	ten raises have reached the owner today	0.5.1 unreleased	contract/exit-codes.json at int/0.5.1 8acb470b	command raise; exit 1
raise.io	the event log or the owner's record can't be read or written	0.5.1 unreleased	contract/exit-codes.json at int/0.5.1 8acb470b	command raise; exit 1
raise.refused	not the orchestrator's seat or a lead's	0.5.1 unreleased	contract/exit-codes.json at int/0.5.1 8acb470b	command raise; exit 1
raise.file	the team file can't be read	0.5.1 unreleased	contract/exit-codes.json at int/0.5.1 8acb470b	command raise; exit 2
raise.usage	the invocation can't be read	0.5.1 unreleased	contract/exit-codes.json at int/0.5.1 8acb470b	command raise; exit 2
reload.human	the seat is a human's pane; nothing is closed, typed into or launched over it	0.5.1 unreleased	contract/exit-codes.json at int/0.5.1 8acb470b	command reload; exit 1
reply.replied	the reply record was written on its thread, or its thread was closed	0.5.1 unreleased	contract/exit-codes.json at int/0.5.1 8acb470b	command reply; exit 0
reply.refused	the record can't be answered, the thread can't be closed, or the call is not the owner or a seat of the team	0.5.1 unreleased	contract/exit-codes.json at int/0.5.1 8acb470b	command reply; exit 1
reply.configuration	the team file can't be read	0.5.1 unreleased	contract/exit-codes.json at int/0.5.1 8acb470b	command reply; exit 2
reply.usage	the invocation can't be read	0.5.1 unreleased	contract/exit-codes.json at int/0.5.1 8acb470b	command reply; exit 2
send.confirmed	a native handoff was recorded to the history and its pending record cleared	0.5.1 unreleased	contract/exit-codes.json at int/0.5.1 8acb470b	command send; exit 0
send.native	a native handoff was printed for the sender's own SendMessage, and nothing was delivered	0.5.1 unreleased	contract/exit-codes.json at int/0.5.1 8acb470b	command send; exit 0
send.sent-unconfirmed	the record is written and left in the seat's own folder — its inbox on the mcp-inbox leg, its drop folder on the drop leg — and no signed read receipt has come back	0.5.1 unreleased	contract/exit-codes.json at int/0.5.1 8acb470b	command send; exit 0

The integration supplement preserves 31 additional ids; baseline rows keep the release-tag behavior even if the integration implementation changes their meaning.

Contributions reconciled at this draft: accounts and gates, budgets, events, grants, launch, messaging, quality gates, records and ledger, RFC process files (no entries), registry, roles, round, seat state and watch, tasks and broker. The Kernel’s §12 points to the same records/ledger contribution rows. All list-valued contributions were expanded against their pinned code source; feature settings outside the release catalogue remain planned.

Revision log

• Draft (2026-10-18): read the pinned source lists and consolidated completed spec contributions; planned entries remain distinct.

Generated from docs/specs/registries/exit-codes.md at v0.5.2 (1d1224a4) — edit the repository, not this page.