0.0.3

Safety mode added for print by object (#4)

* Forced UTF-8 reading of files

Would cause script to fail if certain characters where used in gcode.

* Update machine start G-code and change filament logic

Safety check to make sure you don't use nopoop while doing a print by object plate.

* Update machine start G-code and change filament G-code

Safety check to make sure you don't use nopoop while doing a print by object plate.

* Update machine_start_gcode for printer settings

Safety check to make sure you don't use nopoop while doing a print by object plate.

* Update machine start G-code for printer settings

Safety check to make sure you don't use nopoop while doing a print by object plate.

* Update machine_start_gcode in AD5X Nopoop configuration

* Update machine_start_gcode for printer settings

* Update OrcaSlicer profiles readme with new modes

Added support for USE_TRASH_ON_PRINT=1 if using print by object and clarified settings.

* Обновить G-коды и инструкции по режимам сброса

Обновлены G-коды для поддержки новых режимов сброса пластика и добавлены инструкции по переключению между ними.

* Update machine start G-code for printer settings

* Refactor machine_start_gcode for clarity and logic

* Refactor machine_start_gcode for clarity and logic

* Refactor machine_start_gcode for clarity

* Refactor machine_start_gcode for clarity

* Updated with correct values for print by object safety

I removed the emoji and corrected the settings to cause slicer controled poop mode to be used if the plate is set to "by object"

* Working print by object detection

Detection updated and corrected to include machine change filament gcode validation to skip custom filament slicer gcode when the plate is print by object.

* Re-added orca workaround for OrcaSlicer bug #12837

Re added workaround bug found by ninjamidia.

* Update filament change and start gcode for Nopoop mode

Updated to properly detect print mode correctly.
Updated notes to mention that 'slicer-controled' will be used if the print is print "by object".

* Update printer notes and add cooling tube length

* Update filament change G-code for Nopoop mode

* Update filament change and machine start GCode

* Update filament change gcode for Nopoop mode

* Update OrcaSlicer Profiles Readme for trash modes

Removed reference to USE_TRASH_ON_PRINT=1 (poop mode) and clarified the use of slicer-controlled poop mode.

* Обновить инструкции по режимам сброса отходов

Упрощены г-коды для режимов сброса отходов и уточнены инструкции по переключению в режим управления слайсером.

* Update machine start GCode and printer notes

* Update machine start gcode and printer notes

* Update machine_start_gcode and printer_notes