Add Shoop

hackpads/Shoop/Firmware/QMK/config.h

@@ -0,0 +1,19 @@
+// Copyright 2023 QMK
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#define ENCODER_A_PINS { GP0 }
+#define ENCODER_B_PINS { GP1 }
+
+#pragma once
+
+#define MATRIX_ROWS 2
+#define MATRIX_COLS 4
+
+// Set number of encoders if applicable
+#define NUM_ENCODERS 2
+
+// Define other configurations here as needed
+#define ENCODER_RESOLUTION 4
+
+// If you're using layers, set the max layer
+#define MAX_LAYER 4

hackpads/Shoop/Firmware/QMK/keyboard.json

@@ -0,0 +1,40 @@
+{
+    "manufacturer": "Manni Reis",
+    "keyboard_name": "shoop",
+    "maintainer": "mannireis",
+    "bootloader": "rp2040",
+    "diode_direction": "COL2ROW",
+    "features": {
+        "bootmagic": true,
+        "command": false,
+        "console": false,
+        "extrakey": true,
+        "mousekey": true,
+        "nkro": true
+    },
+    "matrix_pins": {
+        "cols": ["GP26", "GP27", "GP28", "GP29"],
+        "rows": ["GP6", "GP7"]
+    },
+    "processor": "RP2040",
+    "url": "",
+    "usb": {
+        "device_version": "1.0.0",
+        "pid": "0x0000",
+        "vid": "0xFEED"
+    },
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"matrix": [0, 0], "x": 0, "y": 0},
+                {"matrix": [0, 1], "x": 1, "y": 0},
+                {"matrix": [0, 2], "x": 2, "y": 0},
+                {"matrix": [0, 3], "x": 3, "y": 0},
+                {"matrix": [1, 0], "x": 0, "y": 1},
+                {"matrix": [1, 1], "x": 1, "y": 1},
+                {"matrix": [1, 2], "x": 2, "y": 1},
+                {"matrix": [1, 3], "x": 3, "y": 1}
+            ]
+        }
+    }
+}

hackpads/Shoop/Firmware/QMK/keymap_introspection.c

@@ -0,0 +1,2 @@
+extern const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS];
+extern const uint16_t encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS];

hackpads/Shoop/Firmware/QMK/keymaps/default/keymap.c

@@ -0,0 +1,25 @@
+#include QMK_KEYBOARD_H
+
+// Define the keymap layout
+#define LAYOUT_ortho_2x4( \
+    k00, k01, k02, k03, \
+    k10, k11, k12, k13 \
+) { \
+    { k00, k01, k02, k03 }, \
+    { k10, k11, k12, k13 } \
+}
+
+// Define keymaps
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT_ortho_2x4(
+        KC_ESC, KC_1,    KC_2,    KC_3, 
+        KC_4,   KC_5,    KC_6,    KC_7
+    ),
+};
+
+// Define encoder map
+const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = {
+    [0] = { { KC_VOLD, KC_VOLU }, { KC_MUTE, KC_MUTE } },
+};
+
+// You can add other configurations or macros as needed

hackpads/Shoop/Firmware/QMK/readme.md

@@ -0,0 +1,27 @@
+# shoop
+
+![shoop](imgur.com image replace me!)
+
+*A short description of the keyboard/project*
+
+* Keyboard Maintainer: [Manni Reis](https://github.com/mannireis)
+* Hardware Supported: *The PCBs, controllers supported*
+* Hardware Availability: *Links to where you can find this hardware*
+
+Make example for this keyboard (after setting up your build environment):
+
+    make shoop:default
+
+Flashing example for this keyboard:
+
+    make shoop:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+Enter the bootloader in 3 ways:
+
+* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
+* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

hackpads/Shoop/Firmware/QMK/rules.mk

@@ -0,0 +1,4 @@
+LTO_ENABLE = yes
+ENCODER_ENABLE = yes
+ENCODER_MAP_ENABLE = yes
+MIDI_ENABLE = yes

hackpads/Shoop/README.md

@@ -0,0 +1,45 @@
+# Shoop
+
+
+
+Shoop is a 2x4 with 1 rotary encoder.
+## CAD Model:
+
+
+Everything fits together using 4 M2 Bolts.
+It has 1 stl file
+![image](https://github.com/user-attachments/assets/a7cc2982-b4de-4a77-9df4-07ca1e64d79d)
+
+
+Made in Fusion360. 
+
+## PCB
+
+
+
+Here's my PCB! It was made in KiCad. The silkscreen was imported from a Figma image.
+
+Schematic: ![image](https://github.com/user-attachments/assets/ba13377a-ba37-4b7e-bcde-db50a986527a)
+
+
+
+PCB  ![image](https://github.com/user-attachments/assets/dc7834a3-c5a7-4789-b555-fb8c45371158)
+
+
+
+## Firmware Overview
+
+This hackpad uses [QMK](https://qmk.fm/) firmware for everything.
+
+## BOM:
+
+Here should be everything you need to make this hackpad
+
+- 7x Cherry MX Switches
+- 7x DSA Keycaps
+- 4x 16 mm m2 bolts
+- 8x 1N4148 DO-35 Diodes.
+- 1x 0.91" 128x32 OLED Display
+- 1x EC11 Rotary Encoder
+- 1x XIAO RP2040
+- 1x Case (6 printed parts)