You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Ready to submit your project? Nice job! Hopefully you've read the submission guidelines. If not, make sure to read them first.
Check off the following to let the reviewers know you've done everything:
[ ✔️ ] I HAVE RAN DRC ON MY DESIGN WITH ZERO ERRORS (Silkscreen errors are okay)
[ ✔️ ] I HAVE BRANDED ALL MY PARTS (PCB, CASE) WITH MY HACKPAD'S NAME
[ ✔️ ] I HAVE MADE SURE MY 3D PRINTED PARTS DO NOT REQUIRE SUPPORTS (Text branding overhang is okay)
[ ✔️ ] I HAVE MADE SURE TO INCLUDE TOLERANCES (0.25mm)
[ ✔️ ] MY HACKPAD'S PCB IS UNDER 100mm x 100mm, I DO NOT HAVE MORE THAN 16X SWITCHES, 2X ROTARY ENCODERS, 1X OLED, 16X LEDS.
[ ✔️ ] IN MY FOLDER, THERE IS A README.MD FILE THAT CONTAINS THE FOLLOWING INFORMATION:
Full render including all the parts
A few sentences about the inspiration and challenges
BOM
Photos of the Schematic, PCB, and case
If you're unsure about the format, make sure to check out this example and follow the format there.
If this PR isn't a submission, that's okay too! Please remove the above boxes and explain what the pull request is for! If there's anything about this PR template that seems confusing, send a message in #hackpad in slack!
Thank you for pointing out! It was likely because of the Kicad backup files, and OPL_Kicad_library. I removed most of the files which were not required. I kept some duplicates of the libraries in the assets folder (just 5MBs now) , because I wanted to go as per the submission guide lines. Please let me know if I need to make any other changes!
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
Ready to submit your project? Nice job! Hopefully you've read the submission guidelines. If not, make sure to read them first.
Check off the following to let the reviewers know you've done everything:
[ ✔️ ] I HAVE RAN DRC ON MY DESIGN WITH ZERO ERRORS (Silkscreen errors are okay)
[ ✔️ ] I HAVE BRANDED ALL MY PARTS (PCB, CASE) WITH MY HACKPAD'S NAME
[ ✔️ ] I HAVE MADE SURE MY 3D PRINTED PARTS DO NOT REQUIRE SUPPORTS (Text branding overhang is okay)
[ ✔️ ] I HAVE MADE SURE TO INCLUDE TOLERANCES (0.25mm)
[ ✔️ ] MY HACKPAD'S PCB IS UNDER 100mm x 100mm, I DO NOT HAVE MORE THAN 16X SWITCHES, 2X ROTARY ENCODERS, 1X OLED, 16X LEDS.
[ ✔️ ] IN MY FOLDER, THERE IS A README.MD FILE THAT CONTAINS THE FOLLOWING INFORMATION:
If you're unsure about the format, make sure to check out this example and follow the format there.
If this PR isn't a submission, that's okay too! Please remove the above boxes and explain what the pull request is for! If there's anything about this PR template that seems confusing, send a message in #hackpad in slack!