v1.0.0

Flashing a prebuilt image

Both images are required — the firmware alone serves only a
recovery page, because the web UI lives in the filesystem image.

esptool.py --chip esp32 --port /dev/ttyUSB0 --baud 921600 \
  write_flash \
    0x1000   esp32dev-bootloader.bin \
    0x8000   esp32dev-partitions.bin \
    0x10000  esp32dev-firmware.bin \
    0x310000 esp32dev-littlefs.bin

Offsets are from partitions_ir_4mb.csv; the ESP32-S3 build uses
the 8 MB table, so its filesystem offset is 0x610000 and its
bootloader goes to 0x0.

Already running this firmware? Update over the air instead:
System → Firmware update in the web UI. A filesystem update
erases learned commands, so export a backup first.

Verify a download against SHA256SUMS.txt.

Full Changelog: https://github.com/hammad42/esp32-ir-blaster/commits/v1.0.0