Blinky 1.5.32

中文 | English

Blinky 1.5.32

已经在运行 1.5.31？ 会自动提示更新，也可在 设置 → 关于 → 检查更新 手动检查。

更新内容

• 写明长度的较短限额会写出预计用尽时间。 在「设置 → 用量」打开「显示预估」后，包括 Kimi Code 的 5 小时限额在内，按当前速度会在本次重置前用尽的限额会在自己那一行下面写出这个时间。没有写明长度的每周限额，已用不到四分之一时仍显示「预计可维持到本轮重置」；已用达到四分之一时，这一行不显示。#94

安装

下载 Blinky-1.5.32.dmg，打开后把 Blinky 拖入「应用程序」。未公证，首次启动会被阻止：先打开 Blinky 并关闭警告，再到 系统设置 → 隐私与安全性 → 安全性 → 仍要打开。只需操作一次。

需要 macOS 14 或更高版本，支持 Apple 芯片和 Intel。

完整更新记录：v1.5.31...v1.5.32

---

Blinky 1.5.32

Already running 1.5.31? Blinky will offer 1.5.32 on its own — or use Settings → About → Check now.

What's new

• A shorter limit that states its length shows when it may run out. With Show the estimate on under Settings → Usage, that limit, including Kimi Code's five-hour limit, writes the time under its own row when the current pace runs out before its reset. A weekly limit with no stated length still says it is expected to last while less than a quarter is spent, and stays quiet once a quarter is spent. #94

Install

Download Blinky-1.5.32.dmg and drag Blinky into Applications. Not notarized, so macOS blocks the first launch: open Blinky, dismiss the warning, then go to System Settings → Privacy & Security → Security → Open Anyway. Once only.

Requires macOS 14 or newer. Universal (Apple Silicon and Intel).

Full Changelog: v1.5.31...v1.5.32

Blinky 1.5.31

中文 | English

Blinky 1.5.31

已经在运行 1.5.30？ 会自动提示更新，也可在 设置 → 关于 → 检查更新 手动检查。

更新内容

• 用得不多的每周限额仍会写出用尽预估。 在「设置 → 用量」打开「显示预估」后，只报告重置时间、不报告窗口长度的每周限额（包括 Kimi Code）在已用不到四分之一时仍显示「预计可维持到本轮重置」，窗口已经打开一段时间也一样；已用达到四分之一、仍然没有长度时，这一行不显示。#93

安装

下载 Blinky-1.5.31.dmg，打开后把 Blinky 拖入「应用程序」。未公证，首次启动会被阻止：先打开 Blinky 并关闭警告，再到 系统设置 → 隐私与安全性 → 安全性 → 仍要打开。只需操作一次。

需要 macOS 14 或更高版本，支持 Apple 芯片和 Intel。

完整更新记录：v1.5.30...v1.5.31

---

Blinky 1.5.31

Already running 1.5.30? Blinky will offer 1.5.31 on its own — or use Settings → About → Check now.

What's new

• A lightly used week still shows the exhaustion estimate. With Show the estimate on under Settings → Usage, a weekly limit that reports a reset and no length, including Kimi Code, still says the window is expected to last while less than a quarter is spent, even when that window is already open. At a quarter spent, with no length reported, that line stays off. #93

Install

Download Blinky-1.5.31.dmg and drag Blinky into Applications. Not notarized, so macOS blocks the first launch: open Blinky, dismiss the warning, then go to System Settings → Privacy & Security → Security → Open Anyway. Once only.

Requires macOS 14 or newer. Universal (Apple Silicon and Intel).

Full Changelog: v1.5.30...v1.5.31

Blinky 1.5.30

中文 | English

Blinky 1.5.30

已经在运行 1.5.29？ 会自动提示更新，也可在 设置 → 关于 → 检查更新 手动检查。

更新内容

• 「输出速度」改名为「性能」。 「Token 消耗」窗口里，这一节位于「Token 活动」下面；有这些记录时，每个模型列出缓存命中率、缓存、输入和输出，计时过的回复仍列出 tok/s 和首字延迟。#92

安装

下载 Blinky-1.5.30.dmg，打开后把 Blinky 拖入「应用程序」。未公证，首次启动会被阻止：先打开 Blinky 并关闭警告，再到 系统设置 → 隐私与安全性 → 安全性 → 仍要打开。只需操作一次。

需要 macOS 14 或更高版本，支持 Apple 芯片和 Intel。

完整更新记录：v1.5.29...v1.5.30

---

Blinky 1.5.30

Already running 1.5.29? Blinky will offer 1.5.30 on its own — or use Settings → About → Check now.

What's new

• Performance replaces Output speed. Under Token activity in the Token spend window, each model lists its cache hit rate, cache, input and output when those records exist, and still lists tok/s and the first-token wait when a reply was timed. #92

Install

Download Blinky-1.5.30.dmg and drag Blinky into Applications. Not notarized, so macOS blocks the first launch: open Blinky, dismiss the warning, then go to System Settings → Privacy & Security → Security → Open Anyway. Once only.

Requires macOS 14 or newer. Universal (Apple Silicon and Intel).

Full Changelog: v1.5.29...v1.5.30

Blinky 1.5.29

中文 | English

Blinky 1.5.29

已经在运行 1.5.28？ 会自动提示更新，也可在 设置 → 关于 → 检查更新 手动检查。

更新内容

• 「Token 消耗」不再一直停在其他窗口前面。 从用量卡片打开「Token 消耗」后，点到别的窗口，这一窗口会退到后面。#91
• 「输出速度」的列表更紧凑。 「Token 消耗」窗口仍以 tok/s 列出所选统计区间的平均速度和每个已计时模型的速度，日志里有首字时间时写在该模型下面，每一行比设置里的一行更矮。#91

安装

下载 Blinky-1.5.29.dmg，打开后把 Blinky 拖入「应用程序」。未公证，首次启动会被阻止：先打开 Blinky 并关闭警告，再到 系统设置 → 隐私与安全性 → 安全性 → 仍要打开。只需操作一次。

需要 macOS 14 或更高版本，支持 Apple 芯片和 Intel。

完整更新记录：v1.5.28...v1.5.29

---

Blinky 1.5.29

Already running 1.5.28? Blinky will offer 1.5.29 on its own — or use Settings → About → Check now.

What's new

• The Token spend window no longer stays in front of other apps. With Token spend open from the usage card, clicking another window brings that window forward and leaves this one behind it. #91
• Output speed uses a shorter list. The Token spend window still shows the selected span's average and each timed model's speed in tok/s, with first-token latency under that model when a log recorded it, and each row is shorter than a settings row. #91

Install

Download Blinky-1.5.29.dmg and drag Blinky into Applications. Not notarized, so macOS blocks the first launch: open Blinky, dismiss the warning, then go to System Settings → Privacy & Security → Security → Open Anyway. Once only.

Requires macOS 14 or newer. Universal (Apple Silicon and Intel).

Full Changelog: v1.5.28...v1.5.29

Blinky 1.5.28

中文 | English

Blinky 1.5.28

已经在运行 1.5.27？ 会自动提示更新，也可在 设置 → 关于 → 检查更新 手动检查。

更新内容

• Token 窗口把输出速度单独成一节。 用量卡片旁的「Token 消耗」窗口以 tok/s 列出所选统计区间的平均输出速度和每个已计时模型的速度，有首字时间时写在该模型旁边，合计下不再显示「部分估算」和说明。#90

安装

下载 Blinky-1.5.28.dmg，打开后把 Blinky 拖入「应用程序」。未公证，首次启动会被阻止：先打开 Blinky 并关闭警告，再到 系统设置 → 隐私与安全性 → 安全性 → 仍要打开。只需操作一次。

需要 macOS 14 或更高版本，支持 Apple 芯片和 Intel。

完整更新记录：v1.5.27...v1.5.28

---

Blinky 1.5.28

Already running 1.5.27? Blinky will offer 1.5.28 on its own — or use Settings → About → Check now.

What's new

• The Token window gives output speed its own section. The Token spend window beside the usage card lists the selected span's average and each timed model's speed in tok/s, with first-token latency beside that model when a log recorded it, and no longer writes Partial estimate or an explanation under the totals. #90

Install

Download Blinky-1.5.28.dmg and drag Blinky into Applications. Not notarized, so macOS blocks the first launch: open Blinky, dismiss the warning, then go to System Settings → Privacy & Security → Security → Open Anyway. Once only.

Requires macOS 14 or newer. Universal (Apple Silicon and Intel).

Full Changelog: v1.5.27...v1.5.28

Blinky 1.5.27

中文 | English

Blinky 1.5.27

已经在运行 1.5.26？ 会自动提示更新，也可在 设置 → 关于 → 检查更新 手动检查。

更新内容

• 窗口显示时，菜单栏显示 Blinky。 打开设置，或让这个窗口成为当前窗口时，菜单栏显示 Blinky。#85

安装

下载 Blinky-1.5.27.dmg，打开后把 Blinky 拖入「应用程序」。未公证，首次启动会被阻止：先打开 Blinky 并关闭警告，再到 系统设置 → 隐私与安全性 → 安全性 → 仍要打开。只需操作一次。

需要 macOS 14 或更高版本，支持 Apple 芯片和 Intel。

完整更新记录：v1.5.26...v1.5.27

---

Blinky 1.5.27

Already running 1.5.26? Blinky will offer 1.5.27 on its own — or use Settings → About → Check now.

What's new

• The menu bar shows Blinky when its window is shown. Opening Settings, or making that window key, puts Blinky's name in the menu bar. #85

Install

Download Blinky-1.5.27.dmg and drag Blinky into Applications. Not notarized, so macOS blocks the first launch: open Blinky, dismiss the warning, then go to System Settings → Privacy & Security → Security → Open Anyway. Once only.

Requires macOS 14 or newer. Universal (Apple Silicon and Intel).

Full Changelog: v1.5.26...v1.5.27

Blinky 1.5.26

中文 | English

Blinky 1.5.26

已经在运行 1.5.25？ 会自动提示更新，也可在 设置 → 关于 → 检查更新 手动检查。

更新内容

• 自动检查更新的间隔可以自己设定。 在「设置 → 关于」的「自动检查」下面，用数字和单位选择分钟、小时、天或周，默认是 12 小时（此前固定为每两小时），改完后下一次定时检查按新的间隔安排，不必重新打开 Blinky。「检查更新」仍会打开更新窗口，「先通知」「直接打开窗口」和「自动安装」保持不变。#89

安装

下载 Blinky-1.5.26.dmg，打开后把 Blinky 拖入「应用程序」。未公证，首次启动会被阻止：先打开 Blinky 并关闭警告，再到 系统设置 → 隐私与安全性 → 安全性 → 仍要打开。只需操作一次。

需要 macOS 14 或更高版本，支持 Apple 芯片和 Intel。

完整更新记录：v1.5.25...v1.5.26

---

Blinky 1.5.26

Already running 1.5.25? Blinky will offer 1.5.26 on its own — or use Settings → About → Check now.

What's new

• The automatic update check can run on an interval you choose. Under Settings → About, next to Check automatically, the interval is a number and a unit of minutes, hours, days, or weeks, defaulting to 12 hours where it was a fixed two hours, and changing it reschedules the next check without restarting Blinky. Check now still opens the update window, and Notify first, Show the window, and Install silently stay as they are. #89

Install

Download Blinky-1.5.26.dmg and drag Blinky into Applications. Not notarized, so macOS blocks the first launch: open Blinky, dismiss the warning, then go to System Settings → Privacy & Security → Security → Open Anyway. Once only.

Requires macOS 14 or newer. Universal (Apple Silicon and Intel).

Full Changelog: v1.5.25...v1.5.26

Blinky 1.5.25

中文 | English

Blinky 1.5.25

已经在运行 1.5.24？ 会自动提示更新，也可在 设置 → 关于 → 检查更新 手动检查。

更新内容

• Token 窗口写出输出速度。 用量卡片旁的 Token 窗口在合计下面显示所选统计区间内已计时回复的平均速度；按模型划分时，每个模型写出 token/秒，日志里有首字时间时一并写出。#88

安装

下载 Blinky-1.5.25.dmg，打开后把 Blinky 拖入「应用程序」。未公证，首次启动会被阻止：先打开 Blinky 并关闭警告，再到 系统设置 → 隐私与安全性 → 安全性 → 仍要打开。只需操作一次。

需要 macOS 14 或更高版本，支持 Apple 芯片和 Intel。

完整更新记录：v1.5.24...v1.5.25

---

Blinky 1.5.25

Already running 1.5.24? Blinky will offer 1.5.25 on its own — or use Settings → About → Check now.

What's new

• The Token window shows output speed. The Token window beside the usage card shows the average speed of timed replies in the selected span under the totals, and each model row shows tokens per second, plus first-token latency when the log records it. #88

Install

Download Blinky-1.5.25.dmg and drag Blinky into Applications. Not notarized, so macOS blocks the first launch: open Blinky, dismiss the warning, then go to System Settings → Privacy & Security → Security → Open Anyway. Once only.

Requires macOS 14 or newer. Universal (Apple Silicon and Intel).

Full Changelog: v1.5.24...v1.5.25

Blinky 1.5.24

中文 | English

Blinky 1.5.24

已经在运行 1.5.23？ 会自动提示更新，也可在 设置 → 关于 → 检查更新 手动检查。

更新内容

• 自动安装完成后会说明这一版。 在「设置 → 关于 → 发现更新时」选择「自动安装」后，Blinky 重新打开时会通知已安装的版本和这一版的更新内容。现在检查仍会打开更新窗口。#87

安装

下载 Blinky-1.5.24.dmg，打开后把 Blinky 拖入「应用程序」。未公证，首次启动会被阻止：先打开 Blinky 并关闭警告，再到 系统设置 → 隐私与安全性 → 安全性 → 仍要打开。只需操作一次。

需要 macOS 14 或更高版本，支持 Apple 芯片和 Intel。

完整更新记录：v1.5.23...v1.5.24

---

Blinky 1.5.24

Already running 1.5.23? Blinky will offer 1.5.24 on its own — or use Settings → About → Check now.

What's new

• Install silently says what was installed. With Settings → About → When an update is found set to Install silently, Blinky notifies you of the installed version and that release's notes after it opens again. Check now still opens the update window. #87

Install

Download Blinky-1.5.24.dmg and drag Blinky into Applications. Not notarized, so macOS blocks the first launch: open Blinky, dismiss the warning, then go to System Settings → Privacy & Security → Security → Open Anyway. Once only.

Requires macOS 14 or newer. Universal (Apple Silicon and Intel).

Full Changelog: v1.5.23...v1.5.24

Blinky 1.5.23

中文 | English

Blinky 1.5.23

已经在运行 1.5.22？ 会自动提示更新，也可在 设置 → 关于 → 检查更新 手动检查。

更新内容

• 重置后用量偏快时，用尽预估仍会显示。 在「设置 → 用量」打开「显示预估」后，每周限额刚重置且已用至少 5% 时，卡片仍写出用尽预估，并在下面注明「开头偏快，预估仅供参考」；用量较少时仍写「预计可维持到本轮重置」。#84

安装

下载 Blinky-1.5.23.dmg，打开后把 Blinky 拖入「应用程序」。未公证，首次启动会被阻止：先打开 Blinky 并关闭警告，再到 系统设置 → 隐私与安全性 → 安全性 → 仍要打开。只需操作一次。

需要 macOS 14 或更高版本，支持 Apple 芯片和 Intel。

完整更新记录：v1.5.22...v1.5.23

---

Blinky 1.5.23

Already running 1.5.22? Blinky will offer 1.5.23 on its own — or use Settings → About → Check now.

What's new

• A fast start after a reset still shows the exhaustion estimate. With Show the estimate on under Settings → Usage, a weekly limit that has just reset and is already at least 5% used still shows how long it may last, with a quieter line that a fast start is only a guide, while lighter use still says the window is expected to last. #84

Install

Download Blinky-1.5.23.dmg and drag Blinky into Applications. Not notarized, so macOS blocks the first launch: open Blinky, dismiss the warning, then go to System Settings → Privacy & Security → Security → Open Anyway. Once only.

Requires macOS 14 or newer. Universal (Apple Silicon and Intel).

Full Changelog: v1.5.22...v1.5.23