Tuya integration not updating status after 2025.4.1 update

[gradevd]

The problem

Hey folks,

First time reporting a bug here. And I'm a huge admirer of the whole community and everything you don.

I Just updated my local HA server to the latest version 2025.4.1.

Unfortunately, my Tuya integration is now out of order. I have a couple of window sensors that were working just fine before. Now the Tuya integration does not update the status of the sensors at all. I need to reload the integration to get the latest status of the sensors, but then again if the status is changed HA never updates it until the next Tuya reload.

On the other hand, the sensors status is updated quite well on the native Tuya app.

Thanks,
Dimitar

What version of Home Assistant Core has the issue?

2025.4.1

What was the last working version of Home Assistant Core?

No response

What type of installation are you running?

Home Assistant OS

Integration causing the issue

Tuya

Link to integration documentation on our website

No response

Diagnostics information

No response

Example YAML snippet

Anything in the logs that might be useful for us?

Additional information

No response

[home-assistant]

Hey there @tuya, @zlinoliver, mind taking a look at this issue as it has been labeled with an integration (tuya) you are listed as a code owner for? Thanks!

Code owner commands

Code owners of tuya can trigger bot actions by commenting:

• @home-assistant close Closes the issue.
• @home-assistant rename Awesome new title Renames the issue.
• @home-assistant reopen Reopen the issue.
• @home-assistant unassign tuya Removes the current integration label and assignees on the issue, add the integration domain after the command.
• @home-assistant add-label needs-more-information Add a label (needs-more-information, problem in dependency, problem in custom component) to the issue.
• @home-assistant remove-label needs-more-information Remove a label (needs-more-information, problem in dependency, problem in custom component) on the issue.

_{^{(message by CodeOwnersMention)}}

---

tuya documentation
tuya source
_{^{(message by IssueLinks)}}

[MSl1gh]

The same problem here since I updated to the new core version this morning.

Made some tests:

Disabled most of the devices: Temp./Humid. Sensors, Smartplugs, ..
Left only two 50A Circuit Breakers enabled
Tuya Integration Hub was going to state: active
Enabled the first Temp./Humid. Sensors, then the next one and so on
Tuya Integration Hub stays in state: active
Enabled the first Smartplug , then the next one and so on
Tuya Integration Hub goes to state: Initializing for about 5 minutes or more
After this time the Tuya Integration Hub was going to state: active

All 10 devices with 33 entities are available.

[hahalj]

I also have problems with Tuya after upgrading to HA Core 2025.4.1.
Specifically I can't get power readings or toggle on/off on switches, when I set to On, they go back to Off in the UI, while the hardware is set On.

Log output:

2025-04-05 19:58:46.082 WARNING (ImportExecutor_0) [homeassistant.backports.enum] StrEnum was used from tuya, this is a deprecated alias which will be removed in HA Core 2025.5. Use enum.StrEnum instead, please report it to the author of the 'tuya' custom integration
2025-04-05 19:58:46.369 ERROR (Thread-2) [root] Uncaught thread exception
Traceback (most recent call last):
  File "/usr/local/lib/python3.13/threading.py", line 1041, in _bootstrap_inner
    self.run()
    ~~~~~~~~^^
  File "/usr/local/lib/python3.13/site-packages/tuya_iot/openmq.py", line 158, in run
    self.__run_mqtt()
    ~~~~~~~~~~~~~~~^^
  File "/usr/local/lib/python3.13/site-packages/tuya_iot/openmq.py", line 172, in __run_mqtt
    mqttc = self._start(mq_config)
  File "/usr/local/lib/python3.13/site-packages/tuya_iot/openmq.py", line 179, in _start
    mqttc = mqtt.Client(mq_config.client_id)
  File "/usr/local/lib/python3.13/site-packages/paho/mqtt/client.py", line 772, in __init__
    raise ValueError(
        "Unsupported callback API version: version 2.0 added a callback_api_version, see docs/migrations.rst for details"
    )

[MSl1gh]

Moin,

after reading other posts here, I have a solution for my HA Tuya integration.

Disabling IP6 protocol stack in the HA network settings causes the Tuya integration to run again normally.
The duration of reloading the Hub takes only one or two seconds; with IP6 activated five minutes and longer.

It seems it is a network problem with the Tuya Cloud, not a pure Tuya integration problem.

[DieBreuers]

Does Matter work when I put ipv6 off?
I thought it does not work with v4.

The Problem with the integration is not new.
I’ve seen it some weeks ago. And made a rollback
to Core 2025.2.2, Supervisor 2025.03.4, Operating System 14.2.

[principat]

My problem was a routing issue caused by wire guard client. It was not configured well so the integration used the vpn gateway wich could not connect to tuya api.

You can check the routing in the terminal with
traceroute openapi.tuyaeu.com
The first result step is the used gateway of your home assistant

[DieBreuers]

I haven't changed anything on my system, including my network components. The error specifically occurred with the HA update. This is also being discussed in some other forums. Some people have created a workaround by reloading the integration every 15 minutes. (It works, but it's not exactly nice.)

I don't mean to say that the HA guys made a mistake here. But something is suddenly different. And this was almost two months ago. As described above, my workaround is to wait with the update until a solution is found. Unfortunately, I have some Tuya devices that are only gradually being replaced.

Greetz from Germany NRW

[gradevd]

I tried the proposal to downgrade to Core 2025.2.2, Supervisor 2025.03.4, Operating System 14.2. but no success here. My TUYA binary sensors are just stuck and change their state only when I reload the Tuya hub.
Haven't tried @principat proposal yet, but not sure if it applies to me tough as I have no vpn configured on my ha server.

[dobo290]

same problem on all tuya devices. It starts updating for about a minute whenever I open the smart life app.
Tuya Hub seems to have changed a lot.

If I don't touch anything, at least the switches work but once they get changed from the app or any other source than HASS, they don't get recognised. I can turn them on then but not off anymore as they jump back to the off state.

This is quite bad as I am controlling my entire PV and battery system with tuya.

[Martyns20]

same problem on all tuya devices. It starts updating for about a minute whenever I open the smart life app. Tuya Hub seems to have changed a lot.

I have exactly the same issue. Tuya derived entities are frozen until I open the same Tuya device on my Tuya mobile app then the values update. If then I exit the app they seem to freeze or update randomly and often 20 minutes between updates. I too have lots of devices albeit none of them have critical functions, I do hope they (Tuya) fix it soon...

[BackaDeGama]

I have the same problem as the author. The sensors are updated only when the integration is restarted.

[vdovinmih]

Same here. Imho it is not HA problem

[dobo290]

Same here. Imho it is not HA problem

I actually think it might be.

I pulled the plugs on ha and my router because I worked on something else and once I restarted everything, it worked flawlessly over the entire night.

Once I made a change, I think manually setting a switch from the smart life app, everything falls apart.

Rebooting my ha does not solve it, only when the router and the tuya rail devices do reboot as well.

[Martyns20]

There seems to be a tie in with 2025.4.1 and/or 2025.4.2 from previous posts and my experience. Also, I noticed erratic pings/slow response from the Tuya API portal openapi.tuyaeu.com