Skip to content

Releases: homebridge/homebridge-syno-spk

Release list

4.1.2

4.1.2 Latest
Latest

Choose a tag to compare

View all tags
@github-actions github-actions released this 27 Mar 12:57
4.1.2
4fb9609
This commit was created on GitHub.com and signed with GitHub’s verified signature.
GPG key ID: B5690EEEBB952194
Verified
Learn about vigilant mode.

For DSM 7.x.x only.

This package does not use Docker. If you are currently running Homebridge in Docker, create a backup and remove the container before installing this package.

Breaking Changes

⚠️ Version v3.x.x contains breaking changes for users upgrading from v2.x.x or earlier. Plugins will require re-installation. You should create a backup before upgrading.

Supported Models

  • x86_64 - All 64 bit Intel / AMD CPU Models ( braswell )
  • evansport (i686) - DS414play, DS415play ( evansport )
  • rtd1296 (armv8) - DS420j, DS220j, RS819, DS418, DS218, DS218play, DS118
  • rtd1619b (armv8) - DS124, DS223, DS223j, DS423
  • armada37xx (armv8) - DS120j, DS119j
  • armada38x (armv7) - DS419slim, DS218j, RS217, RS816, DS416j, DS416slim, DS216, DS216j, DS116
  • alpine (armv7) - DS1817, DS1517, DS416, DS2015xs, DS1515, DS715, DS215+

Installation

This package will deploy Homebridge and the Homebridge UI natively on your Synology NAS. It will create a new shared named homebridge to store the Homebridge configuration and user data.

Dependencies

This package will leverage the Synology supplied NodeJS v20 package.

Install Homebridge:

  1. Download the correct SPK for your system from https://synology.homebridge.io (see above for arch types):
  2. Go back to Package Center and click "Manual Install" - select the .spk file you downloaded.
  3. Click Agree when warned about using a package from an unknown publisher.
  4. Click Done to confirm installation.

Please note low power device make take 10-15 minutes to install the package.

The Homebridge UI app starts on port 8581. The default username is admin with password admin.

If you have the Synology Firewall enabled, make a rule to allow access to port 8581 and the port Homebridge was assigned too.

Recommended Post-Install Steps:

If you like the Homebridge UI or the Homebridge Synology Package Installer please consider donating via PayPal ❤️

Assets 9
Loading

4.1.1

4.1.1 Pre-release
Pre-release

Choose a tag to compare

View all tags
@github-actions github-actions released this 27 Mar 12:48
4.1.1
2ab5201

For DSM 7.x.x only.

This package does not use Docker. If you are currently running Homebridge in Docker, create a backup and remove the container before installing this package.

Breaking Changes

⚠️ Version v3.x.x contains breaking changes for users upgrading from v2.x.x or earlier. Plugins will require re-installation. You should create a backup before upgrading.

Supported Models

  • x86_64 - All 64 bit Intel / AMD CPU Models ( braswell )
  • evansport (i686) - DS214play, DS414play, DS415play ( evansport )
  • rtd1296 (armv8) - DS420j, DS220j, RS819, DS418, DS218, DS218play, DS118
  • rtd1619b (armv8) - DS124, DS223, DS223j, DS423
  • armada37xx (armv8) - DS120j, DS119j
  • armada38x (armv7) - DS419slim, DS218j, RS217, RS816, DS416j, DS416slim, DS216, DS216j, DS116
  • alpine (armv7) - DS1817, DS1517, DS416, DS2015xs, DS1515, DS715, DS215+

Installation

This package will deploy Homebridge and the Homebridge UI natively on your Synology NAS. It will create a new shared named homebridge to store the Homebridge configuration and user data.

Dependencies

This package will leverage the Synology supplied NodeJS v20 package.

Add the Homebridge Synology Package Source:

  1. Open Package Center in DSM and select the Settings option.
  2. Select the Package Sources tab.
  3. Click Add
  4. In the Name section enter Homebridge
  5. In the Location section enter https://synology.homebridge.io
  6. Click OK

Install Homebridge:

  1. Go back to Package Center and search for Homebridge
  2. Click on the Homebridge package then select Install
  3. Click Agree when warned about using a package from an unknown publisher.
  4. Click Done to confirm installation.

Please note low power device make take 10-15 minutes to install the package.

The Homebridge UI app starts on port 8581. The default username is admin with password admin.

If you have the Synology Firewall enabled, make a rule to allow access to port 8581 and the port Homebridge was assigned too.

Recommended Post-Install Steps:

If you like the Homebridge UI or the Homebridge Synology Package Installer please consider donating via PayPal ❤️

Loading

4.1.0

4.1.0

Choose a tag to compare

View all tags
@github-actions github-actions released this 26 Feb 02:01
4.1.0
c1a8023

For DSM 7.x.x only.

This package does not use Docker. If you are currently running Homebridge in Docker, create a backup and remove the container before installing this package.

Breaking Changes

⚠️ Version v3.x.x contains breaking changes for users upgrading from v2.x.x or earlier. Plugins will require re-installation. You should create a backup before upgrading.

Supported Models

  • x86_64 - All 64 bit Intel / AMD CPU Models ( braswell )
  • evansport (i686) - DS214play, DS414play, DS415play ( evansport )
  • rtd1296 (armv8) - DS420j, DS220j, RS819, DS418, DS218, DS218play, DS118
  • rtd1619b (armv8) - DS124, DS223, DS223j, DS423
  • armada37xx (armv8) - DS120j, DS119j
  • armada38x (armv7) - DS419slim, DS218j, RS217, RS816, DS416j, DS416slim, DS216, DS216j, DS116
  • alpine (armv7) - DS1817, DS1517, DS416, DS2015xs, DS1515, DS715, DS215+

Installation

This package will deploy Homebridge and the Homebridge UI natively on your Synology NAS. It will create a new shared named homebridge to store the Homebridge configuration and user data.

Dependencies

This package will leverage the Synology supplied NodeJS v20 or v22 package.

Add the Homebridge Synology Package Source:

  1. Open Package Center in DSM and select the Settings option.
  2. Select the Package Sources tab.
  3. Click Add
  4. In the Name section enter Homebridge
  5. In the Location section enter https://synology.homebridge.io
  6. Click OK

Install Homebridge:

  1. Go back to Package Center and search for Homebridge
  2. Click on the Homebridge package then select Install
  3. Click Agree when warned about using a package from an unknown publisher.
  4. Click Done to confirm installation.

Please note low power device make take 10-15 minutes to install the package.

The Homebridge UI app starts on port 8581. The default username is admin with password admin.

If you have the Synology Firewall enabled, make a rule to allow access to port 8581 and the port Homebridge was assigned too.

Recommended Post-Install Steps:

If you like the Homebridge UI or the Homebridge Synology Package Installer please consider donating via PayPal ❤️

Loading

4.0.1

4.0.1 Pre-release
Pre-release

Choose a tag to compare

View all tags
@github-actions github-actions released this 11 Feb 00:52
4.0.1
dff183e
This commit was created on GitHub.com and signed with GitHub’s verified signature.
GPG key ID: B5690EEEBB952194
Verified
Learn about vigilant mode.

For DSM 7.x.x only.

This package does not use Docker. If you are currently running Homebridge in Docker, create a backup and remove the container before installing this package.

Breaking Changes

⚠️ Version v3.x.x contains breaking changes for users upgrading from v2.x.x or earlier. Plugins will require re-installation. You should create a backup before upgrading.

Supported Models

  • x86_64 - All 64 bit Intel / AMD CPU Models ( braswell )
  • evansport (i686) - DS214play, DS414play, DS415play ( evansport )
  • rtd1296 (armv8) - DS420j, DS220j, RS819, DS418, DS218, DS218play, DS118
  • rtd1619b (armv8) - DS124, DS223, DS223j, DS423
  • armada37xx (armv8) - DS120j, DS119j
  • armada38x (armv7) - DS419slim, DS218j, RS217, RS816, DS416j, DS416slim, DS216, DS216j, DS116
  • alpine (armv7) - DS1817, DS1517, DS416, DS2015xs, DS1515, DS715, DS215+

Installation

This package will deploy Homebridge and the Homebridge UI natively on your Synology NAS. It will create a new shared named homebridge to store the Homebridge configuration and user data.

Dependencies

This package will leverage the Synology supplied NodeJS v20 package.

Add the Homebridge Synology Package Source:

  1. Open Package Center in DSM and select the Settings option.
  2. Select the Package Sources tab.
  3. Click Add
  4. In the Name section enter Homebridge
  5. In the Location section enter https://synology.homebridge.io
  6. Click OK

Install Homebridge:

  1. Go back to Package Center and search for Homebridge
  2. Click on the Homebridge package then select Install
  3. Click Agree when warned about using a package from an unknown publisher.
  4. Click Done to confirm installation.

Please note low power device make take 10-15 minutes to install the package.

The Homebridge UI app starts on port 8581. The default username is admin with password admin.

If you have the Synology Firewall enabled, make a rule to allow access to port 8581 and the port Homebridge was assigned too.

Recommended Post-Install Steps:

If you like the Homebridge UI or the Homebridge Synology Package Installer please consider donating via PayPal ❤️

Loading

4.0.0

4.0.0 Pre-release
Pre-release

Choose a tag to compare

View all tags
@github-actions github-actions released this 08 Feb 23:46
4.0.0
457eb09
This commit was created on GitHub.com and signed with GitHub’s verified signature.
GPG key ID: B5690EEEBB952194
Verified
Learn about vigilant mode.

For DSM 7.x.x only.

This package does not use Docker. If you are currently running Homebridge in Docker, create a backup and remove the container before installing this package.

Breaking Changes

⚠️ Version v3.x.x contains breaking changes for users upgrading from v2.x.x or earlier. Plugins will require re-installation. You should create a backup before upgrading.

Supported Models

  • x86_64 - All 64 bit Intel / AMD CPU Models ( braswell )
  • evansport (i686) - DS214play, DS414play, DS415play ( evansport )
  • rtd1296 (armv8) - DS420j, DS220j, RS819, DS418, DS218, DS218play, DS118
  • rtd1619b (armv8) - DS124, DS223, DS223j, DS423
  • armada37xx (armv8) - DS120j, DS119j
  • armada38x (armv7) - DS419slim, DS218j, RS217, RS816, DS416j, DS416slim, DS216, DS216j, DS116
  • alpine (armv7) - DS1817, DS1517, DS416, DS2015xs, DS1515, DS715, DS215+

Installation

This package will deploy Homebridge and the Homebridge UI natively on your Synology NAS. It will create a new shared named homebridge to store the Homebridge configuration and user data.

Dependencies

This package will leverage the Synology supplied NodeJS v20 package.

Add the Homebridge Synology Package Source:

  1. Open Package Center in DSM and select the Settings option.
  2. Select the Package Sources tab.
  3. Click Add
  4. In the Name section enter Homebridge
  5. In the Location section enter https://synology.homebridge.io
  6. Click OK

Install Homebridge:

  1. Go back to Package Center and search for Homebridge
  2. Click on the Homebridge package then select Install
  3. Click Agree when warned about using a package from an unknown publisher.
  4. Click Done to confirm installation.

Please note low power device make take 10-15 minutes to install the package.

The Homebridge UI app starts on port 8581. The default username is admin with password admin.

If you have the Synology Firewall enabled, make a rule to allow access to port 8581 and the port Homebridge was assigned too.

Recommended Post-Install Steps:

If you like the Homebridge UI or the Homebridge Synology Package Installer please consider donating via PayPal ❤️

Loading

3.1.3

3.1.3 Pre-release
Pre-release

Choose a tag to compare

View all tags
@github-actions github-actions released this 29 Nov 13:57
3.1.3
457eb09
This commit was created on GitHub.com and signed with GitHub’s verified signature.
GPG key ID: B5690EEEBB952194
Verified
Learn about vigilant mode.

For DSM 7.x.x only.

This package does not use Docker. If you are currently running Homebridge in Docker, create a backup and remove the container before installing this package.

Breaking Changes

⚠️ Version v3.x.x contains breaking changes for users upgrading from v2.x.x or earlier. Plugins will require re-installation. You should create a backup before upgrading.

Supported Models

  • x86_64 - All 64 bit Intel / AMD CPU Models ( braswell )
  • evansport (i686) - DS214play, DS414play, DS415play ( evansport )
  • rtd1296 (armv8) - DS420j, DS220j, RS819, DS418, DS218, DS218play, DS118
  • rtd1619b (armv8) - DS124, DS223, DS223j, DS423
  • armada37xx (armv8) - DS120j, DS119j
  • armada38x (armv7) - DS419slim, DS218j, RS217, RS816, DS416j, DS416slim, DS216, DS216j, DS116
  • alpine (armv7) - DS1817, DS1517, DS416, DS2015xs, DS1515, DS715, DS215+

Installation

This package will deploy Homebridge and the Homebridge UI natively on your Synology NAS. It will create a new shared named homebridge to store the Homebridge configuration and user data.

Dependencies

This package will leverage the Synology supplied NodeJS v20 package.

Add the Homebridge Synology Package Source:

  1. Open Package Center in DSM and select the Settings option.
  2. Select the Package Sources tab.
  3. Click Add
  4. In the Name section enter Homebridge
  5. In the Location section enter https://synology.homebridge.io
  6. Click OK

Install Homebridge:

  1. Go back to Package Center and search for Homebridge
  2. Click on the Homebridge package then select Install
  3. Click Agree when warned about using a package from an unknown publisher.
  4. Click Done to confirm installation.

Please note low power device make take 10-15 minutes to install the package.

The Homebridge UI app starts on port 8581. The default username is admin with password admin.

If you have the Synology Firewall enabled, make a rule to allow access to port 8581 and the port Homebridge was assigned too.

Recommended Post-Install Steps:

If you like the Homebridge UI or the Homebridge Synology Package Installer please consider donating via PayPal ❤️

Loading

3.1.2

3.1.2 Pre-release
Pre-release

Choose a tag to compare

View all tags
@github-actions github-actions released this 09 Oct 13:52
3.1.2
457eb09
This commit was created on GitHub.com and signed with GitHub’s verified signature.
GPG key ID: B5690EEEBB952194
Verified
Learn about vigilant mode.

For DSM 7.x.x only.

This package does not use Docker. If you are currently running Homebridge in Docker, create a backup and remove the container before installing this package.

Breaking Changes

⚠️ Version v3.x.x contains breaking changes for users upgrading from v2.x.x or earlier. Plugins will require re-installation. You should create a backup before upgrading.

Supported Models

  • x86_64 - All 64 bit Intel / AMD CPU Models ( braswell )
  • evansport (i686) - DS214play, DS414play, DS415play ( evansport )
  • rtd1296 (armv8) - DS420j, DS220j, RS819, DS418, DS218, DS218play, DS118
  • rtd1619b (armv8) - DS124, DS223, DS223j, DS423
  • armada37xx (armv8) - DS120j, DS119j
  • armada38x (armv7) - DS419slim, DS218j, RS217, RS816, DS416j, DS416slim, DS216, DS216j, DS116
  • alpine (armv7) - DS1817, DS1517, DS416, DS2015xs, DS1515, DS715, DS215+

Installation

This package will deploy Homebridge and the Homebridge UI natively on your Synology NAS. It will create a new shared named homebridge to store the Homebridge configuration and user data.

Dependencies

This package will leverage the Synology supplied NodeJS v20 package.

Add the Homebridge Synology Package Source:

  1. Open Package Center in DSM and select the Settings option.
  2. Select the Package Sources tab.
  3. Click Add
  4. In the Name section enter Homebridge
  5. In the Location section enter https://synology.homebridge.io
  6. Click OK

Install Homebridge:

  1. Go back to Package Center and search for Homebridge
  2. Click on the Homebridge package then select Install
  3. Click Agree when warned about using a package from an unknown publisher.
  4. Click Done to confirm installation.

Please note low power device make take 10-15 minutes to install the package.

The Homebridge UI app starts on port 8581. The default username is admin with password admin.

If you have the Synology Firewall enabled, make a rule to allow access to port 8581 and the port Homebridge was assigned too.

Recommended Post-Install Steps:

If you like the Homebridge UI or the Homebridge Synology Package Installer please consider donating via PayPal ❤️

Loading

3.1.1

3.1.1

Choose a tag to compare

View all tags
@github-actions github-actions released this 08 Jan 16:50
3.1.1
a0b618f

For DSM 7.x.x only.

This package does not use Docker. If you are currently running Homebridge in Docker, create a backup and remove the container before installing this package.

Breaking Changes

⚠️ Version v3.x.x contains breaking changes for users upgrading from v2.x.x or earlier. Plugins will require re-installation. You should create a backup before upgrading.

Supported Models

  • x86_64 - All 64 bit Intel / AMD CPU Models ( braswell )
  • evansport (i686) - DS214play, DS414play, DS415play ( evansport )
  • rtd1296 (armv8) - DS420j, DS220j, RS819, DS418, DS218, DS218play, DS118
  • rtd1619b (armv8) - DS124, DS223, DS223j, DS423
  • armada37xx (armv8) - DS120j, DS119j
  • armada38x (armv7) - DS419slim, DS218j, RS217, RS816, DS416j, DS416slim, DS216, DS216j, DS116
  • alpine (armv7) - DS1817, DS1517, DS416, DS2015xs, DS1515, DS715, DS215+

Installation

This package will deploy Homebridge and the Homebridge UI natively on your Synology NAS. It will create a new shared named homebridge to store the Homebridge configuration and user data.

Dependencies

This package will leverage the Synology supplied NodeJS v20 package.

Add the Homebridge Synology Package Source:

  1. Open Package Center in DSM and select the Settings option.
  2. Select the Package Sources tab.
  3. Click Add
  4. In the Name section enter Homebridge
  5. In the Location section enter https://synology.homebridge.io
  6. Click OK

Install Homebridge:

  1. Go back to Package Center and search for Homebridge
  2. Click on the Homebridge package then select Install
  3. Click Agree when warned about using a package from an unknown publisher.
  4. Click Done to confirm installation.

Please note low power device make take 10-15 minutes to install the package.

The Homebridge UI app starts on port 8581. The default username is admin with password admin.

If you have the Synology Firewall enabled, make a rule to allow access to port 8581 and the port Homebridge was assigned too.

Recommended Post-Install Steps:

If you like the Homebridge UI or the Homebridge Synology Package Installer please consider donating via PayPal ❤️

Loading

3.1.0

3.1.0

Choose a tag to compare

View all tags
@github-actions github-actions released this 03 Jan 14:32
3.1.0
6f9941c

For DSM 7.x.x only.

This package does not use Docker. If you are currently running Homebridge in Docker, create a backup and remove the container before installing this package.

Breaking Changes

⚠️ Version v3.x.x contains breaking changes for users upgrading from v2.x.x or earlier. Plugins will require re-installation. You should create a backup before upgrading.

Supported Models

  • x86_64 - All 64 bit Intel / AMD CPU Models ( braswell )
  • evansport (i686) - DS214play, DS414play, DS415play ( evansport )
  • rtd1296 (armv8) - DS420j, DS220j, RS819, DS418, DS218, DS218play, DS118
  • rtd1619b (armv8) - DS124, DS223, DS223j, DS423
  • armada37xx (armv8) - DS120j, DS119j
  • armada38x (armv7) - DS419slim, DS218j, RS217, RS816, DS416j, DS416slim, DS216, DS216j, DS116
  • alpine (armv7) - DS1817, DS1517, DS416, DS2015xs, DS1515, DS715, DS215+

Installation

This package will deploy Homebridge and the Homebridge UI natively on your Synology NAS. It will create a new shared named homebridge to store the Homebridge configuration and user data.

Dependencies

This package will leverage the Synology supplied NodeJS v20 package.

Add the Homebridge Synology Package Source:

  1. Open Package Center in DSM and select the Settings option.
  2. Select the Package Sources tab.
  3. Click Add
  4. In the Name section enter Homebridge
  5. In the Location section enter https://synology.homebridge.io
  6. Click OK

Install Homebridge:

  1. Go back to Package Center and search for Homebridge
  2. Click on the Homebridge package then select Install
  3. Click Agree when warned about using a package from an unknown publisher.
  4. Click Done to confirm installation.

Please note low power device make take 10-15 minutes to install the package.

The Homebridge UI app starts on port 8581. The default username is admin with password admin.

If you have the Synology Firewall enabled, make a rule to allow access to port 8581 and the port Homebridge was assigned too.

Recommended Post-Install Steps:

If you like the Homebridge UI or the Homebridge Synology Package Installer please consider donating via PayPal ❤️

Loading

3.0.21

3.0.21

Choose a tag to compare

View all tags
@github-actions github-actions released this 31 Dec 14:28
3.0.21
d1c2558

For DSM 7.x.x only.

This package does not use Docker. If you are currently running Homebridge in Docker, create a backup and remove the container before installing this package.

Breaking Changes

⚠️ Version v3.x.x contains breaking changes for users upgrading from v2.x.x or earlier. Plugins will require re-installation. You should create a backup before upgrading.

Supported Models

  • x86_64 - All 64 bit Intel / AMD CPU Models ( braswell )
  • evansport (i686) - DS214play, DS414play, DS415play ( evansport )
  • rtd1296 (armv8) - DS420j, DS220j, RS819, DS418, DS218, DS218play, DS118
  • rtd1619b (armv8) - DS124, DS223, DS223j, DS423
  • armada37xx (armv8) - DS120j, DS119j
  • armada38x (armv7) - DS419slim, DS218j, RS217, RS816, DS416j, DS416slim, DS216, DS216j, DS116
  • alpine (armv7) - DS1817, DS1517, DS416, DS2015xs, DS1515, DS715, DS215+

Installation

This package will deploy Homebridge and the Homebridge UI natively on your Synology NAS. It will create a new shared named homebridge to store the Homebridge configuration and user data.

Dependencies

This package will leverage the Synology supplied NodeJS v18 package.

Add the Homebridge Synology Package Source:

  1. Open Package Center in DSM and select the Settings option.
  2. Select the Package Sources tab.
  3. Click Add
  4. In the Name section enter Homebridge
  5. In the Location section enter https://synology.homebridge.io
  6. Click OK

Install Homebridge:

  1. Go back to Package Center and search for Homebridge
  2. Click on the Homebridge package then select Install
  3. Click Agree when warned about using a package from an unknown publisher.
  4. Click Done to confirm installation.

Please note low power device make take 10-15 minutes to install the package.

The Homebridge UI app starts on port 8581. The default username is admin with password admin.

If you have the Synology Firewall enabled, make a rule to allow access to port 8581 and the port Homebridge was assigned too.

Recommended Post-Install Steps:

If you like the Homebridge UI or the Homebridge Synology Package Installer please consider donating via PayPal ❤️

Loading