Task List

The first place to look for open tasks that you can help with is the Issues List.

The following list will be removed once everything is moved to the Issues List, completed, or obsolete. If you are interested in helping with any of these tasks, coordinate with the person in parentheses. Try IRC first (freenode channel #hydrabus), then email.

HydraFW v1.0 Work In Progress:

• Smart Card support (Big thanks to the contributors Baldanos/sylvainpelissier/Azox)
  • From commit 97ab4b4 up to e93be6c
  • Wiki documentation Smart Card guide(Console) and Binary Smart Card guide(Binary mode)
• pyHydrabus Python bindings (Thanks to Gheko for helping on this)
• Auxiliary pin support in binary mode
• ADC trigger mode
• SWD bruteforce
• CLI syntax improvements (Thanks to Azox)
• Auxiliary pin support in CLI mode
• I2C for non intrusive sniffer for SDA line
• Binary NFC mode (Thanks to gvinet)
• TBD

HydraFW TODO/IDEA:

Generic:

• Add new utilities:

  • Multimeter up to 3.3V/7.2MSPS(12bits) with logging in µSD file in real-time.

• Bootloader idea using official HydraBus (bootloader) OpenMoko USB ID:

  • USB DFU boot like implemented in actual firmware by keeping UBTN pressed during power ON.
  • Read a configuration file from SDcard(if present) and boot a custom firmware from SDcard(execution in SRAM).
  • other idea TBD.

• Protection/Debug features(for developer):

  • Implement basic stack overflow/underflow check with canaries between each stack (probably need chibios patch)
  • Implement advanced stack overflow/underflow protection using M4F MPU

HydraBus specific:

• Generate DAC output advanced mode using waveform and DMA to generate Sin, Square ...
  • Add Offset and Frequency parameter for waveforms.
• 1-Wire:
  • Add overdrive mode
• i2c:
  • Slave mode
  • Number of bits (7, 8, 10)
• spi:
  • Number of bits (any number)
• can:
  • Replace the ID filter to a mask filter
• Waveform generator
• Measure time between two pin states using hardware timer
• New modes:
  • Parallel Bus (2 to 32bits) with mode sniffer, read and write (with option to log data in realtime to MicroSD) (depending on feedback)
  • 1 or 3 Wire with mode sniffer
  • Basic Scope up to 3.3V and up to 7.2MSPS/12bits
  • [-] Nand Flash x16 support (WILL NOT BE SUPPORTED, see Nand support #12)
• USB 1.x/2.0 LS/FS sniffer mode (using special passthrough mode with logging directly to MicroSD) (see USB sniffer capability #21)

HydraNFC specific:

• Clone Mifare Ultra Light tag (Work In Progress bvernoux)
  • clone-mf-ul command add optional filename (64bytes raw file written to microsd same as read-mf-ul)
    • Read Mifare Ultra Light card then Emulate it
    • Add optional filename to save Mifare Ultra Light tag data read (64bytes raw data of the Tag) to microSD
• Cleanup files trf7970a/src/trf797x.c & trf7970a/src/trf_spi.c and change license to Apache 2.0
• Refactor/Port code from TI NFCLink 1_0_0_3 RFID Files (.cpp/.h) BSD-3 License for TRF7970A driver (see trf7970a\src) (bvernoux)
  • Add also clean TRF7970A direct mode support (SDM/DM1 with Parity & CRC-A calculation)
    • See Issue HydraNFC add SDM TX/DM1 RX mode to implement custom Reader/Writer [Work In Progress] #43
• NFC Sniffer (ISO14443A/MIFARE) command for Wireshark with specific dissector (thanks to NicoHub)
• ISO14443A Emulation (TRF7970A hardware Anticol/UID) see new command emul-3a
  • More accurate emulation (it is too fast today and not compliant with ISO14443A ...)
• To be released see https://github.com/NicoHub/Wireshark-RFID-dissector for more details
• NFC:
  • Scan:
    • support 10-byte UIDs (If someone find Tags with 10 bytes UID)
    • implement real anti-collision (be able to detect 2 tags)
  • Sniffer:
    • real-time write in SD card to sniff during ultra long session (limited by SD card file size and not by the internal 64KB buffer)
    • add optional timestamp global and relative(between data) with at least 73.75ns resolution(for 13.56MHz)
    • Mode for ISO14443B and ISO15693 or lot of other mode TBD (raw specific mode)
  • Emulator mode (Card Emulation) is planned and lot of other modes TBD (like raw mode to modulate even proprietary protocol on 13.56MHz)
    • Emulation Tag Mifare One UID in Alpha (timings are not compliant, need more test...) is available https://github.com/hydrabus/hydrafw/blob/master/hydranfc/hydranfc_emul_mifare.c
    • Emulation Tag ISO14443A Tag UID in Alpha (need more test...) is available https://github.com/hydrabus/hydrafw/blob/master/hydranfc/hydranfc_emul_14443a_sdd.c
  • Read MIFARE tag:
    • Read MIFARE Classic 1K tag data ...

Hardware Extension/Shield

• Extension using EEPROM:
  • Implement support of EEPROM extension detection with same hw & content as Beagle bone defined here

Development Environment:

• Tutorial for EmBitz to load project and debug it (Windows only)
• Tutorial for Eclipse/ChibiStudio to load project and debug it (Windows only)
• Tutorial for Eclipse to load project and debug it (Linux)

DONE (please test with HydraFW v0.9):

• NAND flash mode. To test with more flash memories
• Wiegand mode
• LIN mode with HydraLINCAN shield
• CAN1 and CAN2 with HydraLINCAN Shield
• 1-Wire scan command with multiple devices
• AVR flash / dump (do more tests)
• Binary mode (to do more tests)
• JTAG (with different MCU/CPU and report what work what do not work ...)