Termperatur sensor LM75

[mitchm93]

Hi,
if I try to connect the LM75 Sensor to my SpeedyBee F405 MINI, I can see the sensor in the CLI and in the sensors section of the INAV configurator.
As it is described in https://github.com/iNavFlight/inav/blob/master/docs/Temperature%20sensors.md, there also should be a possibility to log the values.
If I start the sensor search on my TX, it seems, that the temperature sensor will not be transmitted.
How can the values of the sensor be logged ?

Thanks in advance

[mmosca]

What radio protocol are you using?

CRSF does not currently support temperature sensors.

[mitchm93]

I use ELRS

[sensei-hacker]

ELRS (normally) carries CRSF telemetry, so it will only report sensors that are included in CRSF.

If the sensor is critical to your application, you could consider alternatives such as mLRS, but any alternative comes with down sides.

[mitchm93]

I hoped that the sensor will work with ELRS. In this case I'll wait until it will be integraled into ELRS.

Thanks for your reply