v0.0.1-alpha-pre

[ilyakruchinin]

Early preview for testing only.
May (I must say "will") contain bugs.

To flash:
Hold "boot" (left) button and connect to USB-C (screen will be black/off).
Use web flasher, such as:
https://espressif.github.io/esptool-js/
or
https://esptool.spacehuhn.com/
and flash to 0x0

On first boot, it should go to SoftAP mode and allow you to connect to http://192.168.4.1 to configure WiFi and timezone.
After WiFi is configured, it would allow you to boot into main interface, where you can change the rest of the settings.

To power off: hold "power" (middle) button for 10 seconds.
To enter SoftAP mode manually: hold "boot" (left) button for 5 seconds from the main UI.

To pair AS11:
On AS11 LCD, select "More" -> "MyAir App" -> "OK, downloaded" -> "Connect". Then do pairing from SomnoTrace Web UI.
If you have MyAir connected using BLE, you'd need to disconnect it first (or it will hold the connection, preventing pairing from being successful).

I'd recommend using OSCAR with separate profiles for testing.
If you upload to SleepHQ and later decide to upload the SAME therapy session from the files generated by AS11, you will likely get an error (this is not a bug, expected behaviour from SleepHQ, so I'd choose to upload the same session EITHER from SomnoTrace OR from OSCAR). No issue with different sessions, though (just something to keep in mind).

---

This discussion was created from the release v0.0.1-alpha-pre.

[Asad-Foresite]

Successfully flashed and set up on a Waveshare paired to my AS11 without issues.
Running SMB-only tonight before adding SleepHQ in the following nights. Will report back with results.
Excited to put this through its paces, great work so far!

[ilyakruchinin]

Superseded by v0.0.2, should no longer be used.
See: #10
Closing.